Increased Performance TOUGHCable™dramatically increases your Ethernet link states, speeds and…
Brand:
Ubiquiti
Code:
ART-48346
MPN
UISP-Cable-Carrier
EAN
00810354021336
Increased Performance TOUGHCable™dramatically increases your Ethernet link states, speeds and overall performance. Extreme Weatherproof Design TOUGHCable™has been built to perform in even the harshest weather and environments. ESD Damage Protection TOUGHCable™protects your networks from devastating electrostatic discharge attacks. Extended Cable Support TOUGHCable™has been developed to increase power handling performance for extended cable run lengths.
Instant 802.3af Adapters transform passive PoE devices into 802.3af-compliant products. Ubiquiti Compatibility Instant 802.3af Adapters allow most Ubiquiti devices to be powered by an 802.3af switch. Remote Power Control Instant 802.3af Adapters work with 802.3af switches so you can conveniently powercycle your remote devices. Longer Cable Runs Instant 802.3af Adapters deliver power more efficiently, enabling longer cable runs. ESD/Surge Protection Instant 802.3af Adapters provide an additional ±15kV of Ethernet isolation to lessen the risk of ESD or surge damage to connected devices.
ESD Protection for Outdoor High-Speed Networks Introducing the Ethernet Surge Protector, model…
Brand:
Ubiquiti
Code:
ART-108714
MPN
ETH-SP-G2
EAN
00817882023900
ESD Protection for Outdoor High-Speed Networks Introducing the Ethernet Surge Protector, model ETH-SP, from Ubiquiti Networks. The ETH-SP is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti® airMAX® devices already have robust ESD protection built in, adding the ETH-SP to the installation provides an additional layer of protection to the network. The ETH-SP is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility. Ideal for WISP Networks All Ubiquiti airMAX devices are equipped with ESD protection. However, to protect outdoor devices, and to meet certain local code requirements, installing the ETH-SP is essential. For example, to guard against costly service calls, and to help your subscriber installations meet code requirements, install two ETH-SPs: one near the CPE, and the other at the entry point to the building. Damaging ESD attacks and surges will be absorbed by the ETH-SPs and safely discharged into the ground.
Fast Ethernet media converter 100Base-FX / 100Base-TX Single mode 1300 nm, 40 km 2 x SC, 1 xRJ45…
Brand:
Microsens
Code:
ART-09664
MPN
MS650426
EAN
-
Fast Ethernet media converter 100Base-FX / 100Base-TX Single mode 1300 nm, 40 km 2 x SC, 1 xRJ45 Power supply, Relay Contacts For the extreme demanding use in industrial environments MICROSENS has developed special media converter. The converter has included several features such as Link Through, ALM, potential free alarm contacts, connector for redundant power supply, cross over switch, solid metal chassis and an extended temperature range. The industrial product range includes beside the Ethernet (10Base-FL/10Base-T) and Fast Ethernet (100Base-FX/100Base-TX) converter of this data sheet also media converter for serial interfaces (RS-232, RS-422, RS-485).
Gigabit Ethernet converter 1000Base-T/1000Base-SX, 850 nm Multimode, max. 550 m, ext. power supply 1…
Brand:
Microsens
Code:
ART-09572
MPN
MS400190
EAN
-
Gigabit Ethernet converter 1000Base-T/1000Base-SX, 850 nm Multimode, max. 550 m, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.
Gigabit Ethernet converter 1000Base-T/1000Base-LX, 1310 nm single mode, max. 10 km, ext. power…
Brand:
Microsens
Code:
ART-09573
MPN
MS400191
EAN
-
Gigabit Ethernet converter 1000Base-T/1000Base-LX, 1310 nm single mode, max. 10 km, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.
Media Converter 100Base-FX/100Base-TX, 1310 nm Single mode, 15 km, include power supply 2 x SC 1 x…
Brand:
Microsens
Code:
ART-09554
MPN
MS410644-V2
EAN
-
Media Converter 100Base-FX/100Base-TX, 1310 nm Single mode, 15 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.
· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop…
Brand:
Microsens
Code:
ART-09551
MPN
MS400092
EAN
-
· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop chassis · Segment splitting and speed adaptation · Auto-Negotiation 10/100Base-TX half-/full-duplex-mode manually configurable · Multimode max. 2 km, ST-/SC-connector · Single mode versions up to 125 km · Optional simplex fiber (WDM) · Power Supply integrated Fast Ethernet Bridge10/100Base-TX/100Base-FX, 1310nm Single mode, min. 30 km 2x SC 1x RJ-45 MICROSENS' new Mini Bridge provides a fiber to copper media conversion whilst at the same time - via the 10/100Base-TX port acting as a power supply for active terminal equipment like e.g. WLAN-access points, IP-cameras or IP-phones. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbps speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eliminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home" (FTTH) projects.
Media Converter 100Base-FX/100Base-TX, 1310 nm Multimode, 2 km, include power supply 2 x SC 1 x…
Brand:
Microsens
Code:
ART-09552
MPN
MS410640-V2
EAN
-
Media Converter 100Base-FX/100Base-TX, 1310 nm Multimode, 2 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.
· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex…
Brand:
Microsens
Code:
ART-09545
MPN
MS400162
EAN
MS400162
· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex mode manual configurable · multimode max. 2 km, single mode versions up to 125 km, optional with simplex fiber (WDM) · ST-/SC-connectors, optional LC, VF-45 and MT-RJ Fast Ethernet Bridge 1x10/100TX 1x100FX Single mode 1300nm SC Laser min. 15km 1 x RJ-45 2 x SC The new Mini Bridge of MICROSENS offers an easy and cost effective integration of 10 Mbit/s Ethernet equipment into modern fiber based Fast Ethernet networks. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbit/s speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eleminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home“ (FTTH) projects. With the standard 10/100Base-TX interface, the enduser can use internet services, Video on Demand and VoIP applications.