In order to use MICROSENS components with Power-over-Ethernet plus operation according to IEEE 802.3at, the user must apply a universal compact power supply unit for placing into cable trunks, sub-floor systems, respectively wall mounting housings.
Having extremely compact dimensions, this 54 VDC power supply unit has a power of 65 W. The power loss is minimized by the high efficiency factor of about 90%. The power unit is also equipped with an effective voltage surge protection as well as overload protection.
The power-supply MS700710 has conducted grounding, fixed wires at input and output.
For the use in medical environments there are power supplies with approval according to EN60601-1 standard available.
- Compact power supply, low weight
- Installation into cable trunks and sub-floor boxes
- High efficiency of min. 85%
- Input voltage 100..120 / 200..240VAC
- Output voltage 54VDC
- Touch proof 54VDC connector according VDE
- High output power 65W
- EMB/HF filter for interference suppression according EN55022-B, FCC Part 15 Class B, CISPR22-B
- Fully controlled and protected output
- No-load operation protection: no minimum load required
- Overload protection
- Over voltage protection
- 2-pin universal input connector according IEC320 (C9) (MS700701)
- 3x 1.5mm2 wires input, open ends (MS700710)
- conducted grounding (MS700710)
Having extremely compact dimensions, this 54 VDC power supply unit has a power of 65 W. The power loss is minimized by the high efficiency factor of about 90%. The power unit is also equipped with an effective voltage surge protection as well as overload protection.
The power-supply MS700710 has conducted grounding, fixed wires at input and output.
For the use in medical environments there are power supplies with approval according to EN60601-1 standard available.
- Compact power supply, low weight
- Installation into cable trunks and sub-floor boxes
- High efficiency of min. 85%
- Input voltage 100..120 / 200..240VAC
- Output voltage 54VDC
- Touch proof 54VDC connector according VDE
- High output power 65W
- EMB/HF filter for interference suppression according EN55022-B, FCC Part 15 Class B, CISPR22-B
- Fully controlled and protected output
- No-load operation protection: no minimum load required
- Overload protection
- Over voltage protection
- 2-pin universal input connector according IEC320 (C9) (MS700701)
- 3x 1.5mm2 wires input, open ends (MS700710)
- conducted grounding (MS700710)
Tech Detail Table
Tech Detail Table
AC input frequency | 47 - 63 Hz |
AC input voltage | 90 - 264 V |
Certification | 2004/108/EC (EMC)\n2006/95/EG (Low Voltage) |
Depth | 44 mm |
Electromagnetic compatibility | EN5022-B |
Height | 30 mm |
Mean time between failures (MTBF) | 100000 h |
Operating relative humidity (H-H) | 0 - 90% |
Operating temperature (T-T) | 0 - 40 °C |
Product colour | Black |
Product type | Power supply |
Safety | EN60950 |
Storage temperature (T-T) | -40 - 85 °C |
Total power | 65 W |
Weight | 290 g |
Width | 128.5 mm |
Viewed