Microsense MS657208PX network switch Unmanaged Gigabit Ethernet (10/100/1000) Black Power over Ethernet (PoE)
Code: ART-95266 MS657208PX MS657208PX
Unmanaged Industrial PoE Ethernet switch with P.S.E. function. The MS655203PX switch supports Power-over-Ethernet, a solution to transmit electrical power, along with data to end devices over standard twisted-pair cable in an Ethernet network. The switch has 4x10/100/1000Base-T P.S.E. (Power Sourcing Equipment) ports, 1x 10/100/1000Base-T or 1000X SFP Combo port and 1x 1000Base-X SFP port. The optical network speed can be set by changing the settings of the DIP-Switch. The wide operating temperature range from -40 to 75°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
The MS655203PX switch can be used in connecting several PoE P.D. Ethernet devices like IP-Camera, Access Points or other Ethernet devices. In addition, there are two different power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation.
- Gigabit Performance for Industrial Ethernet
- 4x 10/100/1000Base-T PoE+ up to 30 Watts per port
- 1x 10/100/1000Base-T or 100/1000X SFP Combo port
- 1x 100/1000X SFP-Slot for fiber uplinks
- optional 8x 10/100/1000Base-T PoE+ version
- Dual DC-Inputs 48..56 VDC
- Monitoring with potential free relay contact
- Cost effective and compact design
- Ruggedized IP-30 housing design
The MS655203PX switch can be used in connecting several PoE P.D. Ethernet devices like IP-Camera, Access Points or other Ethernet devices. In addition, there are two different power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation.
- Gigabit Performance for Industrial Ethernet
- 4x 10/100/1000Base-T PoE+ up to 30 Watts per port
- 1x 10/100/1000Base-T or 100/1000X SFP Combo port
- 1x 100/1000X SFP-Slot for fiber uplinks
- optional 8x 10/100/1000Base-T PoE+ version
- Dual DC-Inputs 48..56 VDC
- Monitoring with potential free relay contact
- Cost effective and compact design
- Ruggedized IP-30 housing design
Tech Detail Table
Tech Detail Table
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Cable types supported | Cat5e |
| Certification | EN 61000-4-2 (ESD), EN 61000-4-3 (RS), EN 61000-4-4 (EFT), EN 61000-4-5 (Surge), EN 61000-4-6 (CS), EN 61000-4-8, EN 61000-4-11, EN 60068-2-27, EN 60068-2-32, EN 60068-2-6, CE, RoHS, EMC |
| Copper ethernet cabling technology | 1000BASE-T |
| DC voltage range | 44 - 56 V |
| Depth | 105 mm |
| DIN rail mounting | Y |
| Flow control support | Y |
| Height | 142 mm |
| International Protection (IP) code | IP30 |
| Jumbo frames | 9216 |
| Jumbo frames support | Y |
| LED indicators | Y |
| MAC address table | 1000 entries |
| Networking standards | IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u,IEEE 802.3x |
| Operating relative humidity (H-H) | 5 - 95% |
| Operating temperature (T-T) | -40 - 75 °C |
| Power connector | DC-in jack |
| Power consumption (typical) | 5.8 W |
| Power over Ethernet (PoE) | Y |
| Power over Ethernet (PoE) power per port | 30 W |
| Power over Ethernet plus (PoE+) ports quantity | 8 |
| Product colour | Black |
| Safety | EN 60950-1 |
| Storage temperature (T-T) | -40 - 85 °C |
| Store-and-forward | Y |
| Switch type | Unmanaged |
| Wall mountable | Y |
| Width | 36.2 mm |
Viewed