FriendlyELEC NanoPi Neo zbh. NanoHat Hub Il NanoHat Hub è una scheda di estensione plug & play. Il…
Brand:
Allnet
Codice:
ART-107132
MPN
Friendly_NanoHat_Hub
EAN
-
FriendlyELEC NanoPi Neo zbh. NanoHat Hub Il NanoHat Hub è una scheda di estensione plug & play. Il NanoHat Hub comunica con NanoPi NEO / AIR tramite la sua interfaccia I2C. Funziona come un'interfaccia tra NanoPi NEO / AIR e vari moduli esterni. NanoHat Hub dispone di 3 interfacce I2C, 3 interfacce analogiche, 2 interfacce UART e 4 interfacce digitali (tra cui D3 e D5 supportano PWM). Tutti i moduli BakeBit possono essere collegati all'hub NanoHat con un cavo a 4 pin. L'hub NanoHat può essere montato sul connettore NanoPi NEO / AIR con connettori maschi. L'hub NanoHat comunica con vari moduli esterni tramite I2C ed interfacce seriali e A / D. NanoHat Hub dispone di 3 interfacce I2C, 3 interfacce analogiche, 2 interfacce UART e 4 interfacce digitali (tra cui D3 e D5 supportano PWM).
FriendlyELEC NanoPi Neo zbh. NanoHat OLED NanoHat OLED è un piccolo e carino modulo OLED…
Brand:
Allnet
Codice:
ART-106274
MPN
Friendly_NanoHat_oled
EAN
-
FriendlyELEC NanoPi Neo zbh. NanoHat OLED NanoHat OLED è un piccolo e carino modulo OLED monocromatico a basso consumo energetico. È di 0.96 ". La sua risoluzione è 128 x 64. Comunica con un master device con I2C. Il modulo OLED NanoHat ha lo stesso fattore di forma di NanoPi NEO di FriendlyElec. Può essere impilato su un NanoPi NEO. Dispone di tre pulsanti utente integrati programmabili, un connettore I2C a 4 pin con passo da 2,0 mm.
Il Mini Converter Fast Ethernet MS657049X della Linea Industriale Microsens Entry Line offre una…
Brand:
Microsens
Codice:
ART-107650
MPN
MS657049X
EAN
-
Il Mini Converter Fast Ethernet MS657049X della Linea Industriale Microsens Entry Line offre una velocità di trasmissione di 100 Mbps in applicazioni Ethernet di tipo industriale. Oltre alla conversione da rame a fibra, il dispositivo adatta anche la velocità a 10Base-T Fast Ethernet. Questo consente la connessione diretta con end device che possono avere velocità differenti, allo switch centrale. Il dispositivo è di tipo plug-and-play, non sono necessarie particolari configurazioni. Caratteristiche tecniche: Design miniaturizzato in enclosure metallico Alimentazione 18..36VAC/12..60VDC Funzionalità Link Fault Pass through (LFP) Supporta switch mode e converter mode Slot SFP per 100Base-X Range di temperatura esteso -40°C to 75°C
· Compact design, lowest costs per port · Cost optimised, repeaterless copper/fiber conversion ·…
Brand:
Microsens
Codice:
ART-09760
MPN
MS416921M
EAN
-
· Compact design, lowest costs per port · Cost optimised, repeaterless copper/fiber conversion · Simple handling/installation · Support of half- and full-duplex connections · Integrated management, stackable · Optional redundant power supply 24 Port Fast Ethernet Media Converter, 1310 nm Multimode SC, 19"1U, TELCO, manageable 2x TELCO 100Base-TX, 24x SC-duplex 100Base-FX, RPSU Management-Stack With the new generation of multiport media converter it is possible to realise the media conversion of up to 24 ports in 1 height unit (1 HU). This port density can be reached also with the standard optical connectors such as ST- and SC-duplex. Beside this high port density the actual 24 port converter has several additional features such as SNMP/web-based management, optional redundant power supply and auto-crossing integrated. The MICROSENS converter are designed for the installation into 19” racks. With this compact design it is possible to reach very high port densities in the central distribution racks. The connection to the central switch is done, depending on the version, by Telco or RJ-45 cable. The Telco cables are having an RJ-21 connector with a capacity of 12 twisted-pair connections and offer flexibility and simple installation.
· Compact design, lowest costs per port · Cost optimised, repeaterless copper/fiber conversion ·…
Brand:
Microsens
Codice:
ART-09758
MPN
MS416956M
EAN
-
· Compact design, lowest costs per port · Cost optimised, repeaterless copper/fiber conversion · Simple handling/installation · Support of half- and full-duplex connections · Integrated management, stackable · Optional redundant power supply 12 Port Fast Ethernet Media Converter Single mode 1310nm SC, 15 km, 19" 1HU, RJ-45, manageable 12x RJ-45 100Base-TX, 12x SC-duplex 100Base-FX, 3x RJ-45 Management With the new generation of multiport media converter it is possible to realise the media conversion of up to 12 ports in 1 height unit (1 HU). This port density can be reached also with the standard optical connectors such as ST- and SC-duplex. Beside this high port density the actual 12 port converter has several additional features such as SNMP/web-based management, optional redundant power supply and auto-crossing integrated. The MICROSENS converter are designed for the installation into 19” racks. With this compact design it is possible to reach very high port densities in the central distribution racks. The connection to the central switch is done, depending on the version, by Telco or RJ-45 cable. The Telco cables are having an RJ-21 connector with a capacity of 12 twisted-pair connections and offer flexibility and simple installation.
· Compact design, lowest costs per port · Cost optimised, repeaterless copper/fiber conversion ·…
Brand:
Microsens
Codice:
ART-09753
MPN
MS416936M
EAN
-
· Compact design, lowest costs per port · Cost optimised, repeaterless copper/fiber conversion · Simple handling/installation · Support of half- and full-duplex connections · Integrated management, stackable · Optional redundant power supply 12 Port Fast Ethernet Media Converter Single mode 1310 nm SC, 15km, 19"1HU, TELCO, manageable 1xTELCO 100Base-TX, 12x SC-duplex 100Base-FX, 3x RJ-45 Management With the new generation of multiport media converter it is possible to realise the media conversion of up to 12 ports in 1 height unit (1 HU). This port density can be reached also with the standard optical connectors such as ST- and SC-duplex. Beside this high port density the actual 12 port converter has several additional features such as SNMP/web-based management, optional redundant power supply and auto-crossing integrated. The MICROSENS converter are designed for the installation into 19” racks. With this compact design it is possible to reach very high port densities in the central distribution racks. The connection to the central switch is done, depending on the version, by Telco or RJ-45 cable. The Telco cables are having an RJ-21 connector with a capacity of 12 twisted-pair connections and offer flexibility and simple installation.
· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex…
Brand:
Microsens
Codice:
ART-09544
MPN
MS400160
EAN
-
· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex mode manual configurable · multimode max. 2 km, single mode versions up to 125 km, optional with simplex fiber (WDM) · ST-/SC-connectors, optional LC, VF-45 and MT-RJ Fast Ethernet Bridge 1x10/100TX 1x100FX Multimode 1300nm SC, ext. power supply 1 x RJ-45 2 x SC The new Mini Bridge of MICROSENS offers an easy and cost effective integration of 10 Mbit/s Ethernet equipment into modern fiber based Fast Ethernet networks. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbit/s speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eleminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home" (FTTH) projects. With the standard 10/100Base-TX interface, the enduser can use internet services, Video on Demand and VoIP applications.