Allnet-Italy | Products | Surveillance, Access Management, IoT | Sensors

Categorie

Surveillance, Access Management, IoT

Courses and Vendor Services

Industry 4.0

RFID tracking systems

Sensors

Gateway per Sensori

Kit per Sviluppo IoT

Smart City & Environment

Accessories

Various Sensors

LoRa

WiFi

Cellulare

Software & Licenze

Intercoms and Access control

Video surveillance

Smart Infrastructure & Connectivity

Physical security information management (PSIM)

Audible paging systems

Parking & Traffic

Filters

close

Manufacturer

• ADEUNIS
• Allnet
• Elsys
• Enginko
• Jacarta
• Libelium
• MikroTik
• MILESIGHT IoT
• Milesight TVCC
• Monnit
• MultiTech
• Radxa
• RAK Wireless
• Red Lion
• Shelly
• Sierra Wireless
• SKIPLY
• Synergy21
• TEKELEK
• TELTONIKA
• Ubiquiti

Reset filters

Go to Results

Articoli 376

Products per page

12 24 36 48

Brand

Stock available End User Best Price

Adeunis PULSE v4 IP68 - with two 3-wire cable - LoRaWAN…

ADEUNIS

ART-148550

MPN: ARF8230ABA-CBL2

Alert Monitor any leaks MONITOR Feedback concerning readings from gas, water and electricity sensors Monitor consumption (gas, water, electricity meter)

Adeunis PULSE v4 IP68 - with two 3-wire cable - LoRaWAN…

Alert Monitor any leaks MONITOR Feedback concerning readings from gas, water and electricity sensors…

Brand: ADEUNIS

Code: ART-148550

MPN

ARF8230ABA-CBL2

EAN -

Alert Monitor any leaks MONITOR Feedback concerning readings from gas, water and electricity sensors Monitor consumption (gas, water, electricity meter)

Brand: ADEUNIS

Code: ART-148550

MPN

ARF8230ABA-CBL2

stock 14

Your Price

INFO

Adeunis DeltaP LoRaWAN™ EU863-870 Soldered battery / IP68

ADEUNIS

ART-148553

MPN: ARF8283AA

Measure a delta pressure: - Between the atmospheric pressure and the inside of the ventilation box - On both sides of an element (e.g.: filter) - Collect data of a 0-10V sensor On exceeding threshold(s) - Pressure difference or through 0-10V input On digital input events act Controlling the AON outputs.

Adeunis DeltaP LoRaWAN™ EU863-870 Soldered battery / IP68

Measure a delta pressure: - Between the atmospheric pressure and the inside of the ventilation box -…

Brand: ADEUNIS

Code: ART-148553

MPN

ARF8283AA

EAN -

Measure a delta pressure: - Between the atmospheric pressure and the inside of the ventilation box - On both sides of an element (e.g.: filter) - Collect data of a 0-10V sensor On exceeding threshold(s) - Pressure difference or through 0-10V input On digital input events act Controlling the AON outputs.

Brand: ADEUNIS

Code: ART-148553

MPN

ARF8283AA

stock 4

Your Price

INFO

Adeunis "PULSE v4 ATEX LoRaWAN™ EU863-870 + BINDER ATEX

ADEUNIS

ART-148546

MPN: ARF8230FA-B01

Alert Monitor any leaks. MONITOR - Receive values of the indexes from gas meters - Monitor over-consumption

Adeunis "PULSE v4 ATEX LoRaWAN™ EU863-870 + BINDER ATEX

Alert Monitor any leaks. MONITOR - Receive values of the indexes from gas meters - Monitor…

Brand: ADEUNIS

Code: ART-148546

MPN

ARF8230FA-B01

EAN -

Alert Monitor any leaks. MONITOR - Receive values of the indexes from gas meters - Monitor over-consumption

Brand: ADEUNIS

Code: ART-148546

MPN

ARF8230FA-B01

stock 4

Your Price

INFO

Monnit MNS2-8-W2-PB-ST industrial environmental sensor/monitor…

Monnit

ART-109637

MPN: MNS2-8-W2-PB-ST

The ALTA touch activated wireless button sensor allows a notification signal to be sent when immediate contact is important. This button includes an LED response indicator to confirm that the system has received the alert. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-PB-ST industrial environmental sensor/monitor…

The ALTA touch activated wireless button sensor allows a notification signal to be sent when…

Brand: Monnit

Code: ART-109637

MPN

MNS2-8-W2-PB-ST

EAN -

The ALTA touch activated wireless button sensor allows a notification signal to be sent when immediate contact is important. This button includes an LED response indicator to confirm that the system has received the alert. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109637

MPN

MNS2-8-W2-PB-ST

stock 2

Your Price

INFO

Monnit MNS2-8-W2-DC-CF temperature/humidity sensor Indoor Freestanding…

Monnit

ART-109634

MPN: MNS2-8-W2-DC-CF

Monnit wireless dry contact sensors can be used to detect contact between two wired contact points. This sensor can be used with an external mechanical switch or a contact plate to alert the user via SMS text and/or email when the contacts touch or a switch is triggered. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-DC-CF temperature/humidity sensor Indoor Freestanding…

Monnit wireless dry contact sensors can be used to detect contact between two wired contact points.…

Brand: Monnit

Code: ART-109634

MPN

MNS2-8-W2-DC-CF

EAN -

Monnit wireless dry contact sensors can be used to detect contact between two wired contact points. This sensor can be used with an external mechanical switch or a contact plate to alert the user via SMS text and/or email when the contacts touch or a switch is triggered. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109634

MPN

MNS2-8-W2-DC-CF

stock 1

Your Price

INFO

Allnet Friendly NanoPi S2 rev1609, QuadCore Samsung S5P4418 Cortex-A9,…

Allnet

ART-110375

MPN: Friendly_NanoPi_S2_rev1609

FriendlyELEC NanoPi S2 - QuadCore Samsung S5P4418 Cortex-A9, 400Mhz-1,4Ghz, 8Gb EMMC Il NanoPi S2 (S2) è stato progettato e sviluppato da FriendlyElec per professionisti, utenti aziendali, produttori e hobbisti. È una piccola scheda con WiFi, Bluetooth e eMMC. Utilizza il SoC Samsung Cortex-A9 S5P4418 Quad Core con frequenza dinamica scalabile fino a 1,4 GHz. Ha 1G DDR3 RAM, 802.11 b / g / n WiFi e modulo Bluetooth 4.0. La sua unità di gestione alimentazione integrata utilizza il chip AXP228 che supporta l'arresto del software. Prende alimentazione dalla porta MicroUSB. Dispone di un'interfaccia di ingresso / uscita video, jack audio da 3,5 mm, porta USB e slot per scheda MicroSD, porta seriale di debug e pin header ADC. Immagini Android e Debian sono pronte per il NanoPi S2. Il sistema operativo Android supporta l'uscita HDMI e LCD. Il NanoPi S2 dispone di diverse interfacce, porte come LVDS e GPIO, compatibili con GPIO di Raspberry Pi. La sua dimensione PCB è di 40 x 75 mm. Il NanoPi S2 funziona con la maggior parte dei moduli e delle immagini OS sviluppate per le schede basate su FriendlyElec S5P4418.

Allnet Friendly NanoPi S2 rev1609, QuadCore Samsung S5P4418 Cortex-A9,…

FriendlyELEC NanoPi S2 - QuadCore Samsung S5P4418 Cortex-A9, 400Mhz-1,4Ghz, 8Gb EMMC Il NanoPi S2…

Brand: Allnet

Code: ART-110375

MPN

Friendly_NanoPi_S2_rev1609

EAN -

FriendlyELEC NanoPi S2 - QuadCore Samsung S5P4418 Cortex-A9, 400Mhz-1,4Ghz, 8Gb EMMC Il NanoPi S2 (S2) è stato progettato e sviluppato da FriendlyElec per professionisti, utenti aziendali, produttori e hobbisti. È una piccola scheda con WiFi, Bluetooth e eMMC. Utilizza il SoC Samsung Cortex-A9 S5P4418 Quad Core con frequenza dinamica scalabile fino a 1,4 GHz. Ha 1G DDR3 RAM, 802.11 b / g / n WiFi e modulo Bluetooth 4.0. La sua unità di gestione alimentazione integrata utilizza il chip AXP228 che supporta l'arresto del software. Prende alimentazione dalla porta MicroUSB. Dispone di un'interfaccia di ingresso / uscita video, jack audio da 3,5 mm, porta USB e slot per scheda MicroSD, porta seriale di debug e pin header ADC. Immagini Android e Debian sono pronte per il NanoPi S2. Il sistema operativo Android supporta l'uscita HDMI e LCD. Il NanoPi S2 dispone di diverse interfacce, porte come LVDS e GPIO, compatibili con GPIO di Raspberry Pi. La sua dimensione PCB è di 40 x 75 mm. Il NanoPi S2 funziona con la maggior parte dei moduli e delle immagini OS sviluppate per le schede basate su FriendlyElec S5P4418.

Brand: Allnet

Code: ART-110375

MPN

Friendly_NanoPi_S2_rev1609

stock 2

Your Price

INFO

Jacarta SMS Alarm General Base Unit

Jacarta

ART-48565

MPN: SMSAG

La prevenzione con un SMS! Una soluzione molto semplice ma al contempo sofisticata: l’ SMS Alarm General avvisa l’ utente in caso di apertura porte, perdite di acqua, fuoco, perdita di tensione ed altre problematiche simili, prima che il vero disastro avenga! Un semplice sms di allerta ti aiuta a prevenire ulteriori problemi, evitare perdite di tempo e denaro. Sms Alarm General e’ una soluzione che ha un prezzo/prestazione estremamente interessante considerando il modo efficace di avvisare in caso di problematiche ambientali e non. Con la possibilita’ di collegare fino a due sensori, Alarm General utilizza tutti i sensori Go Probe Jacarta. E’ anche possibile collegarlo direttamente a pannelli di allarme quali, fuoco, sicurezza, generatori, UPS, aria condizionata etc .... Sms alarm General puo’ essere utilizzato per proteggere uffici, data center, negozi, capannoni, unita’ industriali, case, ville etc ... Key Features  monitoraggio fino a due sensori (o pannelli di controllo) che utilizzano contatti puliti (aperto/chiuso)  5 nominativi contattabili  configurazione semplice via testo  messaggi personalizzabili: luogo e tipo di sensore  notifica giornaliera  protezione con password e pin  compatibile con la gamma di sensori Go-Probe Jacarta: es: Acqua, fumo, sicurezza (vedere lista)  batteria di back up in opzione  allarme di power failure con l’ utilizzo della batteria di back up  puo’ monitorare UPS, generatori, condizionatori aria etc  porta configurabile come “comando” per switch remoto

Jacarta SMS Alarm General Base Unit

La prevenzione con un SMS! Una soluzione molto semplice ma al contempo sofisticata: l’ SMS Alarm…

Brand: Jacarta

Code: ART-48565

MPN

SMSAG

EAN -

La prevenzione con un SMS! Una soluzione molto semplice ma al contempo sofisticata: l’ SMS Alarm General avvisa l’ utente in caso di apertura porte, perdite di acqua, fuoco, perdita di tensione ed altre problematiche simili, prima che il vero disastro avenga! Un semplice sms di allerta ti aiuta a prevenire ulteriori problemi, evitare perdite di tempo e denaro. Sms Alarm General e’ una soluzione che ha un prezzo/prestazione estremamente interessante considerando il modo efficace di avvisare in caso di problematiche ambientali e non. Con la possibilita’ di collegare fino a due sensori, Alarm General utilizza tutti i sensori Go Probe Jacarta. E’ anche possibile collegarlo direttamente a pannelli di allarme quali, fuoco, sicurezza, generatori, UPS, aria condizionata etc .... Sms alarm General puo’ essere utilizzato per proteggere uffici, data center, negozi, capannoni, unita’ industriali, case, ville etc ... Key Features  monitoraggio fino a due sensori (o pannelli di controllo) che utilizzano contatti puliti (aperto/chiuso)  5 nominativi contattabili  configurazione semplice via testo  messaggi personalizzabili: luogo e tipo di sensore  notifica giornaliera  protezione con password e pin  compatibile con la gamma di sensori Go-Probe Jacarta: es: Acqua, fumo, sicurezza (vedere lista)  batteria di back up in opzione  allarme di power failure con l’ utilizzo della batteria di back up  puo’ monitorare UPS, generatori, condizionatori aria etc  porta configurabile come “comando” per switch remoto

Brand: Jacarta

Code: ART-48565

MPN

SMSAG

stock 2

Your Price

INFO

Monnit MNS2-8-W2-VD-AC industrial environmental sensor/monitor Voltage…

Monnit

ART-109654

MPN: MNS2-8-W2-VD-AC

EAN   113690305970

The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended for use on devices using supply power from 24 - 500 VAC. Not intended for voltages higher than 500 VAC and also not intended for use with DC sources. Perfect for HVAC systems, sprinkler systems, sump pumps and any other type of electrical appliance monitoring. This sensor triggers on the state change from presence to absence of voltage and vice versa. The data is displayed as either "No Voltage" or "Voltage Detected". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-VD-AC industrial environmental sensor/monitor Voltage…

The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended…

Brand: Monnit

Code: ART-109654

MPN

MNS2-8-W2-VD-AC

EAN 113690305970

The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended for use on devices using supply power from 24 - 500 VAC. Not intended for voltages higher than 500 VAC and also not intended for use with DC sources. Perfect for HVAC systems, sprinkler systems, sump pumps and any other type of electrical appliance monitoring. This sensor triggers on the state change from presence to absence of voltage and vice versa. The data is displayed as either "No Voltage" or "Voltage Detected". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109654

MPN

MNS2-8-W2-VD-AC

EAN 113690305970

stock 6

Your Price

INFO

Monnit MNS2-8-W2-VM-500 industrial environmental sensor/monitor…

Monnit

ART-109648

MPN: MNS2-8-W2-VM-500

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-VM-500 industrial environmental sensor/monitor…

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended…

Brand: Monnit

Code: ART-109648

MPN

MNS2-8-W2-VM-500

EAN -

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109648

MPN

MNS2-8-W2-VM-500

stock 2

Your Price

INFO

Monnit MNS2-8-W2-VM-005 industrial environmental sensor/monitor…

Monnit

ART-109639

MPN: MNS2-8-W2-VM-005

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-VM-005 industrial environmental sensor/monitor…

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended…

Brand: Monnit

Code: ART-109639

MPN

MNS2-8-W2-VM-005

EAN -

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109639

MPN

MNS2-8-W2-VM-005

stock 1

Your Price

INFO

Monnit MNS2-8-W2-CM-020 industrial environmental sensor/monitor…

Monnit

ART-109659

MPN: MNS2-8-W2-CM-020

ALTA wireless AC Current Meters measure the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the "hot" wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the iMonnit system. The iMonnit system is capable of generating watt hour or kilowatt hour readings as well. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-CM-020 industrial environmental sensor/monitor…

ALTA wireless AC Current Meters measure the RMS current of an alternating current (AC) system using…

Brand: Monnit

Code: ART-109659

MPN

MNS2-8-W2-CM-020

EAN -

ALTA wireless AC Current Meters measure the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the "hot" wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the iMonnit system. The iMonnit system is capable of generating watt hour or kilowatt hour readings as well. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109659

MPN

MNS2-8-W2-CM-020

stock 3

Your Price

INFO

Monnit MNS2-8-W2-WS-WR water detector Sensmitter Wireless

Monnit

ART-109625

MPN: MNS2-8-W2-WS-WR

The ALTA Wireless Water Rope Sensor detects conductive liquids anywhere along the length of the detection rope by using two wires covered with conducting polymer. When water or conductive liquid contacts the rope, the sensor will immediately turn on the RF radio and transmit the data to the wireless gateway and iMonnit Online Sensor Monitoring and Notification System, allowing the user to immediately receive an alert by SMS text, email or voice call. The sensor rope dries quickly allowing the sensor to reset for next use. The sensor comes with an initial 10 foot section of water detection rope and can be expanded up to 100 feet by simply clicking additional 10 foot sections of detection rope together. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-WS-WR water detector Sensmitter Wireless

The ALTA Wireless Water Rope Sensor detects conductive liquids anywhere along the length of the…

Brand: Monnit

Code: ART-109625

MPN

MNS2-8-W2-WS-WR

EAN -

The ALTA Wireless Water Rope Sensor detects conductive liquids anywhere along the length of the detection rope by using two wires covered with conducting polymer. When water or conductive liquid contacts the rope, the sensor will immediately turn on the RF radio and transmit the data to the wireless gateway and iMonnit Online Sensor Monitoring and Notification System, allowing the user to immediately receive an alert by SMS text, email or voice call. The sensor rope dries quickly allowing the sensor to reset for next use. The sensor comes with an initial 10 foot section of water detection rope and can be expanded up to 100 feet by simply clicking additional 10 foot sections of detection rope together. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109625

MPN

MNS2-8-W2-WS-WR

stock 2

Your Price

INFO

Page 27 of 32 23 24 25 26 27 28 29 30 31 32