Smart City & Environment

Filters

Reset filters

Articoli 21

Shelly PM Mini Gen3 Misuratore intelligente controllato tramite Wi-Fi,…

Shelly

ART-201765

MPN: Shelly PM Mini Gen3

EAN 3800235261613

Shelly PM Mini Gen3. Tipo: Interruttore intelligente, Numero di poli: 1P, Tecnologia di connessione: Wireless. Tensione di ingresso AC: 110 - 240 V, Consumi: 1,2 W, Tensione massima di commutazione (CA): 240 V. Larghezza: 34 mm, Profondità: 16 mm, Altezza: 29 mm. Tipo di imballo: Scatola, Quantità per pacco: 1 pz

Shelly PM Mini Gen3 Misuratore intelligente controllato tramite Wi-Fi,…

Shelly PM Mini Gen3. Tipo: Interruttore intelligente, Numero di poli: 1P, Tecnologia di connessione:…

Brand: Shelly

Code: ART-201765

MPN

Shelly PM Mini Gen3

EAN 3800235261613

Brand: Shelly

Code: ART-201765

MPN

Shelly PM Mini Gen3

EAN 3800235261613

INFO

Monnit ALTA Industrial Wireless Dry Contact Sensor (868MHz) - Promo…

Monnit

ART-114575

MPN: MNS2-8-IN-DC-CF-L01

Monnit ALTA sensori di contatto a secco senza fili Monta ALTA possono essere utilizzati per rilevare il contatto tra due punti di contatto cablati. Questo sensore può essere utilizzato con un interruttore meccanico esterno o una piastra di contatto per avvisare l'utente tramite SMS e / o e-mail quando i contatti toccano o viene attivato un interruttore. Versione Industriale.

Monnit ALTA Industrial Wireless Dry Contact Sensor (868MHz) - Promo…

Monnit ALTA sensori di contatto a secco senza fili Monta ALTA possono essere utilizzati per rilevare…

Brand: Monnit

Code: ART-114575

MPN

MNS2-8-IN-DC-CF-L01

EAN -

Brand: Monnit

Code: ART-114575

MPN

MNS2-8-IN-DC-CF-L01

INFO

Monnit MNS2-8-W2-DC-CF Indoor Freestanding Wireless

Monnit

ART-146335

MPN: MNS2-8-IN-AC-ADV-L10

Monnit wireless dry contact sensors can be used to detect contact between two wired contact points. This sensor can be used with an external mechanical switch or a contact plate to alert the user via SMS text and/or email when the contacts touch or a switch is triggered. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements. - Senses immediate contact between wires - Can also sense when contact is broken - Variety of lead lengths available

Monnit MNS2-8-W2-DC-CF Indoor Freestanding Wireless

Monnit wireless dry contact sensors can be used to detect contact between two wired contact points.…

Brand: Monnit

Code: ART-146335

MPN

MNS2-8-IN-AC-ADV-L10

EAN -

Brand: Monnit

Code: ART-146335

MPN

MNS2-8-IN-AC-ADV-L10

INFO

Shelly H&T White - Sensore Wi-Fi WiFi per umidita e temperatura

Shelly® H&T di Allterco Robotics è destinato al posizionamento in una stanza / area per essere consapevoli dell'umidità e della temperatura. Shelly H&T è alimentato a batteria, con la durata della batteria a 18 mesi. Shelly può funzionare come dispositivo autonomo o come un accessorio per un controller domotico. Specifiche Tipo di batteria: 3 V CC - CR123A Durata della batteria: fino a 18 mesi Consumo elettrico: Statico ?70uA Sveglia ?250 mA Range di misurazione dell'umidità: 0 ~ 100% (± 5%) Range di misurazione della temperatura: -40 ° C ÷ 60 ° C (± 1 ° C) Temperatura di lavoro: -40 ° C ÷ 60 ° C Dimensioni (HxLxL): 35x45x45 mm Protocollo radio: WiFi 802.11 b / g / n Frequenza: 2400 - 2500 MHz; Portata operativa: fino a 50 m all'aperto fino a 30 m all'interno Potenza del segnale radio: 1mW Conforme alle norme UE: Direttiva RE 2014/53 / UE LVD 2014/35 / UE EMC 2004/108 / WE RoHS2 2011 / 65 / UE S

Shelly H&T White - Sensore Wi-Fi WiFi per umidita e temperatura

Shelly® H&T di Allterco Robotics è destinato al posizionamento in una stanza / area per essere…

Brand: Shelly

Code: ART-152255

MPN

183261

EAN 3809511201930

Brand: Shelly

Code: ART-152255

MPN

183261

EAN 3809511201930

INFO

Monnit ALTA Wireless Industrial Light Meter - AA Battery Powered (868…

Monnit

ART-152670

MPN: MNS2-8-IN-LS-LM

I misuratori di luce wireless ALTA misurano l'intensità della luce in lux (luminescenza / area unitaria), da 0 a 1000 lux (raggio interno). Perfetto per applicazioni sensibili alla luce come il monitoraggio della luce di musei e gallerie d'arte. La personalizzazione dell'utente consente di impostare la frequenza delle letture e la possibilità di impostare soglie per notifiche e avvisi tramite SMS, e-mail o chiamate vocali dal sistema.

Monnit ALTA Wireless Industrial Light Meter - AA Battery Powered (868…

I misuratori di luce wireless ALTA misurano l'intensità della luce in lux (luminescenza / area…

Brand: Monnit

Code: ART-152670

MPN

MNS2-8-IN-LS-LM

EAN -

Brand: Monnit

Code: ART-152670

MPN

MNS2-8-IN-LS-LM

INFO

Monnit MNS2-8-W2-PB-ST industrial environmental sensor/monitor…

Monnit

ART-109637

MPN: MNS2-8-W2-PB-ST

The ALTA touch activated wireless button sensor allows a notification signal to be sent when immediate contact is important. This button includes an LED response indicator to confirm that the system has received the alert. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-PB-ST industrial environmental sensor/monitor…

The ALTA touch activated wireless button sensor allows a notification signal to be sent when…

Brand: Monnit

Code: ART-109637

MPN

MNS2-8-W2-PB-ST

EAN -

Brand: Monnit

Code: ART-109637

MPN

MNS2-8-W2-PB-ST

INFO

Monnit MNS2-8-W2-DC-CF temperature/humidity sensor Indoor Freestanding…

Monnit

ART-109634

MPN: MNS2-8-W2-DC-CF

Monnit MNS2-8-W2-DC-CF temperature/humidity sensor Indoor Freestanding…

Monnit wireless dry contact sensors can be used to detect contact between two wired contact points.…

Brand: Monnit

Code: ART-109634

MPN

MNS2-8-W2-DC-CF

EAN -

Brand: Monnit

Code: ART-109634

MPN

MNS2-8-W2-DC-CF

INFO

Monnit MNS2-8-W2-CM-020 industrial environmental sensor/monitor…

Monnit

ART-109659

MPN: MNS2-8-W2-CM-020

ALTA wireless AC Current Meters measure the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the "hot" wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the iMonnit system. The iMonnit system is capable of generating watt hour or kilowatt hour readings as well. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-CM-020 industrial environmental sensor/monitor…

ALTA wireless AC Current Meters measure the RMS current of an alternating current (AC) system using…

Brand: Monnit

Code: ART-109659

MPN

MNS2-8-W2-CM-020

EAN -

Brand: Monnit

Code: ART-109659

MPN

MNS2-8-W2-CM-020

INFO

Monnit MNS2-8-W2-VD-AC industrial environmental sensor/monitor Voltage…

The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended for use on devices using supply power from 24 - 500 VAC. Not intended for voltages higher than 500 VAC and also not intended for use with DC sources. Perfect for HVAC systems, sprinkler systems, sump pumps and any other type of electrical appliance monitoring. This sensor triggers on the state change from presence to absence of voltage and vice versa. The data is displayed as either "No Voltage" or "Voltage Detected". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-VD-AC industrial environmental sensor/monitor Voltage…

The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended…

Brand: Monnit

Code: ART-109654

MPN

MNS2-8-W2-VD-AC

EAN 113690305970

Brand: Monnit

Code: ART-109654

MPN

MNS2-8-W2-VD-AC

EAN 113690305970

INFO

Monnit MNS2-8-W2-VM-500 industrial environmental sensor/monitor…

Monnit

ART-109648

MPN: MNS2-8-W2-VM-500

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-VM-500 industrial environmental sensor/monitor…

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended…

Brand: Monnit

Code: ART-109648

MPN

MNS2-8-W2-VM-500

EAN -

Brand: Monnit

Code: ART-109648

MPN

MNS2-8-W2-VM-500

INFO

Monnit MNS2-8-W2-VM-005 industrial environmental sensor/monitor…

Monnit

ART-109639

MPN: MNS2-8-W2-VM-005

Monnit MNS2-8-W2-VM-005 industrial environmental sensor/monitor…

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended…

Brand: Monnit

Code: ART-109639

MPN

MNS2-8-W2-VM-005

EAN -

Brand: Monnit

Code: ART-109639

MPN

MNS2-8-W2-VM-005

INFO

Monnit MNS2-8-W2-WS-WR water detector Sensmitter Wireless

Monnit

ART-109625

MPN: MNS2-8-W2-WS-WR

The ALTA Wireless Water Rope Sensor detects conductive liquids anywhere along the length of the detection rope by using two wires covered with conducting polymer. When water or conductive liquid contacts the rope, the sensor will immediately turn on the RF radio and transmit the data to the wireless gateway and iMonnit Online Sensor Monitoring and Notification System, allowing the user to immediately receive an alert by SMS text, email or voice call. The sensor rope dries quickly allowing the sensor to reset for next use. The sensor comes with an initial 10 foot section of water detection rope and can be expanded up to 100 feet by simply clicking additional 10 foot sections of detection rope together. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-WS-WR water detector Sensmitter Wireless

The ALTA Wireless Water Rope Sensor detects conductive liquids anywhere along the length of the…

Brand: Monnit

Code: ART-109625

MPN

MNS2-8-W2-WS-WR

EAN -

Brand: Monnit

Code: ART-109625

MPN

MNS2-8-W2-WS-WR

INFO

Page 1 of 2 1 2

Allnet-Italy | Products | Surveillance, Access Management, IoT | Sensors | Smart City & Environment