Outdoor 802.11ac Wave 2 Wi-Fi Access Point with Fiber Backhaul Busy outdoor campuses and public…
Brand:
Ruckus Networks
Code:
ART-84040
MPN
901-T710-WW51
EAN
766062318766
Outdoor 802.11ac Wave 2 Wi-Fi Access Point with Fiber Backhaul Busy outdoor campuses and public spaces can have the most demanding wireless requirements. Somehow you need to provide the same top-tier capacity and performance as a crowded convention center floor, but packaged in a way that can stand up to the rigors of outdoor deployments. Designed for the highest-density outdoor venues, the Ruckus T710 access point delivers Ruckus’ premier Wi-Fi technology in an ultra-lightweight, industrial-grade (IP 67-rated) enclosure. It features patented Ruckus technologies to extend range, mitigate interference, and deliver blazing fast performance—up to 1733Mbps data rate, the highest available for 4 stream MIMO Wi-Fi clients. Bring industry-leading performance, reliability, and coverage to the most crowded outdoor spaces. Great Outdoor Wi-Fi Experience high performance outdoor Wave 2 Wi-Fi with IP-67 weather proofing and dual backhaul options with SFP and 2 gigabit Ethernet ports. Stunning Wi-Fi Performance Extends coverage with patented BeamFlex+TM adaptive antenna technology while mitigating interference by utilizing over 4,000 directional antenna patterns. Get Optimal Throughput ChannelFly dynamic (more...)
ALLNET ALL4760. SFP transceiver type: Fiber optic, Maximum data transfer rate: 10000 Mbit/s,…
Brand:
Allnet
Code:
DE-017181
MPN
ALL4760
EAN
4038816053077
ALLNET ALL4760. SFP transceiver type: Fiber optic, Maximum data transfer rate: 10000 Mbit/s, Interface type: SFP+. Product colour: Metallic. Maximum voltage: 3.6 V
The new PoE power injector 802.3at is used with CyberData’s new V2 Paging Amplifier (Part #…
Brand:
CyberData
Code:
ART-29777
MPN
011124
EAN
-
The new PoE power injector 802.3at is used with CyberData’s new V2 Paging Amplifier (Part # 011061) and V2 Loudspeaker Amplifiers (AC - Part #011095 and Wireless - Part #011096) to provide up to 25 watts of driving power. The Power Injector 802.3at eliminates the need for a PoE enabled hub. In a typical installation, the Power Injector is connected between a non-PoE hub and a CyberData paging device, providing inline power capability to an Ethernet Cat 5 cable.
-8 outlets -15A (UL derated 12A) / 10A -PDU Power Measurement The PE6108 eco PDU is intelligent PDUs…
Brand:
Aten
Code:
ART-40224
MPN
PE6108G-ATA-G
EAN
4710423777620
-8 outlets -15A (UL derated 12A) / 10A -PDU Power Measurement The PE6108 eco PDU is intelligent PDUs that contains 8 AC outlets and is available in various IEC or NEMA socket configurations. It provides secure, centralized, intelligent, power management (power on, off, cycle) of data center IT equipment (servers, storage systems, KVM switches, network devices, serial data devices, etc.), as well as the ability to monitor the center's health environment via sensors*. 1x PE6108 Power Distribution Unit 1x Power Cord 1x Rack Mount Kit 1x Software CD 1x User Instructions
T310s, 120x30 deg, Outdoor 802.11ac Wave 2 2x2:2, 120 degree sector, dual band concurrent access point. One Ethernet port, PoE input, DC input and USB port. -40ºC to 65ºC Operating Temperature. Includes adjustable mounting bracket and one year warranty. Does not include PoE injector Outdoor 2x2:2 2.4/5GHz 802.11ac Wave 2 Wi-Fi access points with omni and directed antenna At stadiums, transit hubs, smart cities, and other crowded outdoor public venues, users want the same fast, reliable Wi-Fi connectivity they expect in their homes or offices. For operators, however, delivering that can be immensely challenging—and expensive. The Ruckus T310 Series of 802.11ac Wave 2 access points provides industry-leading Ruckus wireless performance in an economical, industrial-grade form factor designed for crowded outdoor locations. These ultra-lightweight, low-profile APs feature internal omni-directional or high-gain directional antennas for specific coverage, eliminating the need for bulky panel antennas and confusing and expensive external RF cabling. Choose from either omni, 30-degree narrow beam or 120-degree sector antennas to enable fast, low-cost installation, extended range, and best-in-class throughput in the most challenging outdoor environments(more...)
Le eco PDU PE5208 sono PDU intelligenti che presentano 8 prese CA e disponibili in varie…
Brand:
Aten
Code:
ART-83965
MPN
PE5208G-ATA-G
EAN
4719264642128
Le eco PDU PE5208 sono PDU intelligenti che presentano 8 prese CA e disponibili in varie configurazioni socket IEC o NEMA. Offrono una gestione intelligente dell'alimentazione per le apparecchiature IT dei centri dati grazie ad una misurazione in tempo reale. Inoltre, grazie agli eco Sensors, è possibile eseguire una distinzione tra dipartimenti e posizioni in modo da offrire misurazioni più precise di corrente, tensione, alimentazione e watt-ora in tempo reale.
IP control ON / OFF of the 8 IEC outputs Total input power 16 A , switching capacity per container 8…
Brand:
Allnet
Code:
DE-022163
MPN
ALL4100
EAN
-
IP control ON / OFF of the 8 IEC outputs Total input power 16 A , switching capacity per container 8 A. Allows the switching of eight 240V consumers via Ethernet / TCP / IP or web browser. TP Ethernet port , 100 Mbit , 19 " mountable , powder -coated sheet steel housing
With Power over Ethernet (PoE) it is possible to supply ending devices via network cable not only…
Brand:
Allnet
Code:
ART-49018
MPN
ALL048900V2
EAN
4038816112279
With Power over Ethernet (PoE) it is possible to supply ending devices via network cable not only with data but also with power. This means that you do not only save a power supply, it is now possible to install the ending devices at places with no power sockets. PoE holds a big savings potential. The ALLNET LT PoE products support the IEEE802.3af standard with a performance of 15.4 watts, the IEEE802.3at standard with 30 watts and the LT PoE standard with 90 watts performance. The ALLNET product series recognizes active PoE end devices automatically and supplies them wit PoE depending on the capacity requirement. Due to the combination of switch/injector, repeater and splitter it is possible to enable distances of more than 500 meters. Not PoE capable devices can still be supplied with up to 25V power after this distance. With the CAT6 cables it is therefore achievable to transport performances up to 90 watts via PoE. Highlights: - support IEEE802.3, IEEE802.3u, IEEE802.ab,IEEE802.3af, IEEE802.3at and LT PoE 90W - 1 Port 10/100/1000 Base-T (Data) for connection to a switch, and - 1 Port 10/100/1000 Base-T (Power/Data) for connection to a PoE Device (PD) - Automatic detection of whether the connected device is PoE capable With the ALLNET ALL048900V2 High Power PoE Injector you install your PoE-enabled IP devices such as wireless access points, VoIP phones and much more totally independent of existing electrical outlets. So you can choose the best locations for example WLAN access points installations in a building regarding the wireless technology, without having to worry about power cabling. Non-PoE switches can be efficiently „upgraded“ with Power over Ethernet, especially when you only need a few ports with PoE power supply. Here the ALL048900V2 saves the expensive purchase of a PoE switch. The ALLNET ALL048900V2 supports the IEEE802.3af standard with a power of 15,4 Watt, the IEEE802.3at high power standard with 30 Watt and the LT PoE with 90 Watt power. The ALL048900V2 must not be configured. It has an RJ45 jack and an RJ-45 output connector, which are connected to this switch and the end device to the PoE injector. The cable length can here, as usual in Ethernet, up to 100 meters between the switch and terminal in total. The compact design and the metal case of the ALLNET ALL048900V2 can be very inconspicuous installed and is extremely robust.