Allnet-Italy | Products | Network & Wireless

Categorie

Network & Wireless

Server

Accessories

Uninterruptible power supplies

Switching

Routing

Wireless

XPON

Network Tester

Licences & Warranties

Filters

close

Used

Manufacturer

• 2N
• 802.Wire
• Allnet
• Arista
• Aten
• AVM
• Cambium Networks
• CERAGON
• Cisco
• CyberData
• Dahua
• Draytek
• Eaton
• FORTINET
• Grandstream
• H3C
• Hewlett Packard
• Mars Antennas
• Microsens
• MikroTik
• MIMOSA
• NetAlly
• Netgear
• Patton
• QNAP
• Red Lion
• RF elements
• Ruckus Networks
• Sangoma
• SIAE MICROELETTRONICA
• Siklu
• Synergy21
• Synergy21 Cablaggio
• Technicolor
• Teldat
• TELTONIKA
• TP-Link
• Ubiquiti
• Xclaim
• YEALINK
• Zyxel

Reset filters

Go to Results

Articoli 1331

Products per page

12 24 36 48

Brand

Stock available End User Best Price

Microsens Industrial Gigabit Ethernet Switch 1x 10/100/1000Base-T,…

Microsens

ART-09677

MPN: MS650851M

10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x 10/100Base-TX, 2x 1000Base-SX, SC Multimode 850 nm 2x SC duplex 8x RJ-45 2x power supply · Gigabit Ethernet 10 Port Switch, 7x 10/100Base-TX, 1x10/100/1000-T, 2x 1000Base-SX/LX · 2 Fiber ports for building fault tolerant fiber rings · Manageable with Device Manager, SNMP optional · Full VLAN functionality / data prioritization according to IEEE 802.1q · Reconfiguration time · Optional with SFP · Robust casing in industrial design with integrated holder for 35 mm hat The new 10 port Gigabit Switch is equipped with two 1000Base-SX/LX Gigabit Ethernet fiber optic interfaces and therefore allows the implementation of a fault tolerant optical ring. In case of failure the MICROSENS patented technology assures the reconfiguration of the connection within less than 20 ms.

Microsens Industrial Gigabit Ethernet Switch 1x 10/100/1000Base-T,…

10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x…

Brand: Microsens

Code: ART-09677

MPN

MS650851M

EAN -

10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x 10/100Base-TX, 2x 1000Base-SX, SC Multimode 850 nm 2x SC duplex 8x RJ-45 2x power supply · Gigabit Ethernet 10 Port Switch, 7x 10/100Base-TX, 1x10/100/1000-T, 2x 1000Base-SX/LX · 2 Fiber ports for building fault tolerant fiber rings · Manageable with Device Manager, SNMP optional · Full VLAN functionality / data prioritization according to IEEE 802.1q · Reconfiguration time · Optional with SFP · Robust casing in industrial design with integrated holder for 35 mm hat The new 10 port Gigabit Switch is equipped with two 1000Base-SX/LX Gigabit Ethernet fiber optic interfaces and therefore allows the implementation of a fault tolerant optical ring. In case of failure the MICROSENS patented technology assures the reconfiguration of the connection within less than 20 ms.

Brand: Microsens

Code: ART-09677

MPN

MS650851M

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

Microsens Industrial Gigabit Ethernet Switch 1x 10/100/1000Base-T,…

Microsens

ART-09678

MPN: MS650852M

10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x 10/100Base-TX, 2x 1000Base-LX, SC Single mode 1310 nm 2x SC duplex 8x RJ-45 2x power supply · Gigabit Ethernet 10 Port Switch, 7x 10/100Base-TX, 1x10/100/1000-T, 2x 1000Base-SX/LX · 2 Fiber ports for building fault tolerant fiber rings · Manageable with Device Manager, SNMP optional · Full VLAN functionality / data prioritization according to IEEE 802.1q · Reconfiguration time · Optional with SFP · Robust casing in industrial design with integrated holder for 35 mm hat The new 10 port Gigabit Switch is equipped with two 1000Base-SX/LX Gigabit Ethernet fiber optic interfaces and therefore allows the implementation of a fault tolerant optical ring. In case of failure the MICROSENS patented technology assures the reconfiguration of the connection within less than 20 ms.

Microsens Industrial Gigabit Ethernet Switch 1x 10/100/1000Base-T,…

10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x…

Brand: Microsens

Code: ART-09678

MPN

MS650852M

EAN -

10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x 10/100Base-TX, 2x 1000Base-LX, SC Single mode 1310 nm 2x SC duplex 8x RJ-45 2x power supply · Gigabit Ethernet 10 Port Switch, 7x 10/100Base-TX, 1x10/100/1000-T, 2x 1000Base-SX/LX · 2 Fiber ports for building fault tolerant fiber rings · Manageable with Device Manager, SNMP optional · Full VLAN functionality / data prioritization according to IEEE 802.1q · Reconfiguration time · Optional with SFP · Robust casing in industrial design with integrated holder for 35 mm hat The new 10 port Gigabit Switch is equipped with two 1000Base-SX/LX Gigabit Ethernet fiber optic interfaces and therefore allows the implementation of a fault tolerant optical ring. In case of failure the MICROSENS patented technology assures the reconfiguration of the connection within less than 20 ms.

Brand: Microsens

Code: ART-09678

MPN

MS650852M

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

Microsens Industrial-converter Fast Ethernet 100Base-FX/TX, Single…

Microsens

ART-09664

MPN: MS650426

Fast Ethernet media converter 100Base-FX / 100Base-TX Single mode 1300 nm, 40 km 2 x SC, 1 xRJ45 Power supply, Relay Contacts For the extreme demanding use in industrial environments MICROSENS has developed special media converter. The converter has included several features such as Link Through, ALM, potential free alarm contacts, connector for redundant power supply, cross over switch, solid metal chassis and an extended temperature range. The industrial product range includes beside the Ethernet (10Base-FL/10Base-T) and Fast Ethernet (100Base-FX/100Base-TX) converter of this data sheet also media converter for serial interfaces (RS-232, RS-422, RS-485).

Microsens Industrial-converter Fast Ethernet 100Base-FX/TX, Single…

Fast Ethernet media converter 100Base-FX / 100Base-TX Single mode 1300 nm, 40 km 2 x SC, 1 xRJ45…

Brand: Microsens

Code: ART-09664

MPN

MS650426

EAN -

Fast Ethernet media converter 100Base-FX / 100Base-TX Single mode 1300 nm, 40 km 2 x SC, 1 xRJ45 Power supply, Relay Contacts For the extreme demanding use in industrial environments MICROSENS has developed special media converter. The converter has included several features such as Link Through, ALM, potential free alarm contacts, connector for redundant power supply, cross over switch, solid metal chassis and an extended temperature range. The industrial product range includes beside the Ethernet (10Base-FL/10Base-T) and Fast Ethernet (100Base-FX/100Base-TX) converter of this data sheet also media converter for serial interfaces (RS-232, RS-422, RS-485).

Brand: Microsens

Code: ART-09664

MPN

MS650426

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

Microsens Gigabit Ethernet Media Converter 1000Base-T/1000Base-SX,…

Microsens

ART-09572

MPN: MS400190

Gigabit Ethernet converter 1000Base-T/1000Base-SX, 850 nm Multimode, max. 550 m, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.

Microsens Gigabit Ethernet Media Converter 1000Base-T/1000Base-SX,…

Gigabit Ethernet converter 1000Base-T/1000Base-SX, 850 nm Multimode, max. 550 m, ext. power supply 1…

Brand: Microsens

Code: ART-09572

MPN

MS400190

EAN -

Gigabit Ethernet converter 1000Base-T/1000Base-SX, 850 nm Multimode, max. 550 m, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.

Brand: Microsens

Code: ART-09572

MPN

MS400190

Reorder available

tempo di riapprovigionamento 28 Days

Your Price

INFO

Microsens Gigabit Ethernet Media Converter 1000Base-T/1000Base-LX,…

Microsens

ART-09573

MPN: MS400191

Gigabit Ethernet converter 1000Base-T/1000Base-LX, 1310 nm single mode, max. 10 km, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.

Microsens Gigabit Ethernet Media Converter 1000Base-T/1000Base-LX,…

Gigabit Ethernet converter 1000Base-T/1000Base-LX, 1310 nm single mode, max. 10 km, ext. power…

Brand: Microsens

Code: ART-09573

MPN

MS400191

EAN -

Gigabit Ethernet converter 1000Base-T/1000Base-LX, 1310 nm single mode, max. 10 km, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.

Brand: Microsens

Code: ART-09573

MPN

MS400191

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

Microsens Fast Ethernet Media Converter 100Base-TX/100Base-FX, Single…

Microsens

ART-09554

MPN: MS410644-V2

Media Converter 100Base-FX/100Base-TX, 1310 nm Single mode, 15 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.

Microsens Fast Ethernet Media Converter 100Base-TX/100Base-FX, Single…

Media Converter 100Base-FX/100Base-TX, 1310 nm Single mode, 15 km, include power supply 2 x SC 1 x…

Brand: Microsens

Code: ART-09554

MPN

MS410644-V2

EAN -

Media Converter 100Base-FX/100Base-TX, 1310 nm Single mode, 15 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.

Brand: Microsens

Code: ART-09554

MPN

MS410644-V2

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

Microsens pw-over-Ethernet FE Bridge 1x10/100TX 1x100FX, Single Mode…

Microsens

ART-09551

MPN: MS400092

· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop chassis · Segment splitting and speed adaptation · Auto-Negotiation 10/100Base-TX half-/full-duplex-mode manually configurable · Multimode max. 2 km, ST-/SC-connector · Single mode versions up to 125 km · Optional simplex fiber (WDM) · Power Supply integrated Fast Ethernet Bridge10/100Base-TX/100Base-FX, 1310nm Single mode, min. 30 km 2x SC 1x RJ-45 MICROSENS' new Mini Bridge provides a fiber to copper media conversion whilst at the same time - via the 10/100Base-TX port acting as a power supply for active terminal equipment like e.g. WLAN-access points, IP-cameras or IP-phones. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbps speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eliminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home" (FTTH) projects.

Microsens pw-over-Ethernet FE Bridge 1x10/100TX 1x100FX, Single Mode…

· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop…

Brand: Microsens

Code: ART-09551

MPN

MS400092

EAN -

· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop chassis · Segment splitting and speed adaptation · Auto-Negotiation 10/100Base-TX half-/full-duplex-mode manually configurable · Multimode max. 2 km, ST-/SC-connector · Single mode versions up to 125 km · Optional simplex fiber (WDM) · Power Supply integrated Fast Ethernet Bridge10/100Base-TX/100Base-FX, 1310nm Single mode, min. 30 km 2x SC 1x RJ-45 MICROSENS' new Mini Bridge provides a fiber to copper media conversion whilst at the same time - via the 10/100Base-TX port acting as a power supply for active terminal equipment like e.g. WLAN-access points, IP-cameras or IP-phones. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbps speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eliminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home" (FTTH) projects.

Brand: Microsens

Code: ART-09551

MPN

MS400092

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

Microsens Fast Ethernet Media Converter 100Base-TX/100Base-FX,…

Microsens

ART-09552

MPN: MS410640-V2

Media Converter 100Base-FX/100Base-TX, 1310 nm Multimode, 2 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.

Microsens Fast Ethernet Media Converter 100Base-TX/100Base-FX,…

Media Converter 100Base-FX/100Base-TX, 1310 nm Multimode, 2 km, include power supply 2 x SC 1 x…

Brand: Microsens

Code: ART-09552

MPN

MS410640-V2

EAN -

Media Converter 100Base-FX/100Base-TX, 1310 nm Multimode, 2 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.

Brand: Microsens

Code: ART-09552

MPN

MS410640-V2

Reorder available

tempo di riapprovigionamento 17 Days

Your Price

INFO

Microsense MS400090 200Mbit/s Black

Microsens

ART-09550

MPN: MS400090

Microsense MS400090. Data transfer rate (max): 200 Mbit/s. Networking standards: IEEE 802.3,IEEE 802.3af,IEEE 802.3u, Cabling technology: 10/100Base-TX, 100Base-FX. Connectivity technology: Wired, Interface: 2 x SC, 1 x RJ-45. Colour of product: Black

Microsense MS400090 200Mbit/s Black

Microsense MS400090. Data transfer rate (max): 200 Mbit/s. Networking standards: IEEE 802.3,IEEE…

Brand: Microsens

Code: ART-09550

MPN

MS400090

EAN -

Microsense MS400090. Data transfer rate (max): 200 Mbit/s. Networking standards: IEEE 802.3,IEEE 802.3af,IEEE 802.3u, Cabling technology: 10/100Base-TX, 100Base-FX. Connectivity technology: Wired, Interface: 2 x SC, 1 x RJ-45. Colour of product: Black

Brand: Microsens

Code: ART-09550

MPN

MS400090

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

Microsens Mini Bridge 1x10/100Base-TX, 1x100Base-FX, Single Mode…

Microsens

ART-09545

MPN: MS400162

EAN   MS400162

· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex mode manual configurable · multimode max. 2 km, single mode versions up to 125 km, optional with simplex fiber (WDM) · ST-/SC-connectors, optional LC, VF-45 and MT-RJ Fast Ethernet Bridge 1x10/100TX 1x100FX Single mode 1300nm SC Laser min. 15km 1 x RJ-45 2 x SC The new Mini Bridge of MICROSENS offers an easy and cost effective integration of 10 Mbit/s Ethernet equipment into modern fiber based Fast Ethernet networks. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbit/s speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eleminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home“ (FTTH) projects. With the standard 10/100Base-TX interface, the enduser can use internet services, Video on Demand and VoIP applications.

Microsens Mini Bridge 1x10/100Base-TX, 1x100Base-FX, Single Mode…

· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex…

Brand: Microsens

Code: ART-09545

MPN

MS400162

EAN MS400162

· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex mode manual configurable · multimode max. 2 km, single mode versions up to 125 km, optional with simplex fiber (WDM) · ST-/SC-connectors, optional LC, VF-45 and MT-RJ Fast Ethernet Bridge 1x10/100TX 1x100FX Single mode 1300nm SC Laser min. 15km 1 x RJ-45 2 x SC The new Mini Bridge of MICROSENS offers an easy and cost effective integration of 10 Mbit/s Ethernet equipment into modern fiber based Fast Ethernet networks. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbit/s speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eleminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home“ (FTTH) projects. With the standard 10/100Base-TX interface, the enduser can use internet services, Video on Demand and VoIP applications.

Brand: Microsens

Code: ART-09545

MPN

MS400162

EAN MS400162

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

Ubiquiti Networks AF-5 WLAN access point

Ubiquiti

ART-49019

MPN: AF-5 EU

EAN   00810354022067

The airFiber®5 is purpose-built for outdoor, PtP bridging and carrier-class network backhauls. Innovative Antenna Design The high-isolation, dual-antenna design is ideal for robust performance in the harshest RF noise environments. Revolutionary Performance Surpassing conventional wired backhauls, the airFiber®5 delivers real throughput of up to 1.2+ Gbps. Long-Range Links: 100+ km Designed to be a high-performance backhaul, the airFiber®5 performs at a range of up to 100+ km. Low-Latency Carrier Backhaul The airFiber®5 supports FDD (Frequency Division Duplexing) in full-duplex mode for 5 GHz Unlicensed Band The airFiber®5 operates in worldwide, license-free, 5 GHz frequencies. Users can deploy airFiber5 almost anywhere they choose (subject to local country regulations).

Ubiquiti Networks AF-5 WLAN access point

The airFiber®5 is purpose-built for outdoor, PtP bridging and carrier-class network backhauls.…

Brand: Ubiquiti

Code: ART-49019

MPN

AF-5 EU

EAN 00810354022067

The airFiber®5 is purpose-built for outdoor, PtP bridging and carrier-class network backhauls. Innovative Antenna Design The high-isolation, dual-antenna design is ideal for robust performance in the harshest RF noise environments. Revolutionary Performance Surpassing conventional wired backhauls, the airFiber®5 delivers real throughput of up to 1.2+ Gbps. Long-Range Links: 100+ km Designed to be a high-performance backhaul, the airFiber®5 performs at a range of up to 100+ km. Low-Latency Carrier Backhaul The airFiber®5 supports FDD (Frequency Division Duplexing) in full-duplex mode for 5 GHz Unlicensed Band The airFiber®5 operates in worldwide, license-free, 5 GHz frequencies. Users can deploy airFiber5 almost anywhere they choose (subject to local country regulations).

Brand: Ubiquiti

Code: ART-49019

MPN

AF-5 EU

EAN 00810354022067

stock 10

Your Price

INFO

Ubiquiti Networks POE-54V-80W Gigabit Ethernet 54V PoE adapter

Ubiquiti

ART-77983

MPN: POE-54V-80W-EU

EAN   00810354024597

Ubiquiti Networks POE-54V-80W. Ethernet interface type: Gigabit Ethernet, Ethernet LAN data rates: 10,100,1000 Mbit/s. Colour of product: Black. Power over Ethernet (PoE) voltage: 54 V, Output power: 80 W. Number of products included: 1 pc(s)

Ubiquiti Networks POE-54V-80W Gigabit Ethernet 54V PoE adapter

Ubiquiti Networks POE-54V-80W. Ethernet interface type: Gigabit Ethernet, Ethernet LAN data rates:…

Brand: Ubiquiti

Code: ART-77983

MPN

POE-54V-80W-EU

EAN 00810354024597

Ubiquiti Networks POE-54V-80W. Ethernet interface type: Gigabit Ethernet, Ethernet LAN data rates: 10,100,1000 Mbit/s. Colour of product: Black. Power over Ethernet (PoE) voltage: 54 V, Output power: 80 W. Number of products included: 1 pc(s)

Brand: Ubiquiti

Code: ART-77983

MPN

POE-54V-80W-EU

EAN 00810354024597

stock 9

Your Price

INFO

Page 81 of 111 81 82 83 84 85 86 87 88 89 90