The Power Injector eliminates the need for a PoE enabled hub. In a typical installation, the Power…
Brand:
CyberData
Code:
ART-07129
MPN
010867
EAN
-
The Power Injector eliminates the need for a PoE enabled hub. In a typical installation, the Power Injector is connected between a non-PoE hub and a CyberData paging device, providing inline power capability to an Ethernet Cat 5 cable.
The new PoE power injector 802.3at is used with CyberData’s new V2 Paging Amplifier (Part #…
Brand:
CyberData
Code:
ART-29777
MPN
011124
EAN
-
The new PoE power injector 802.3at is used with CyberData’s new V2 Paging Amplifier (Part # 011061) and V2 Loudspeaker Amplifiers (AC - Part #011095 and Wireless - Part #011096) to provide up to 25 watts of driving power. The Power Injector 802.3at eliminates the need for a PoE enabled hub. In a typical installation, the Power Injector is connected between a non-PoE hub and a CyberData paging device, providing inline power capability to an Ethernet Cat 5 cable.
IP control ON / OFF of the 8 IEC outputs Total input power 16 A , switching capacity per container 8…
Brand:
Allnet
Code:
DE-022163
MPN
ALL4100
EAN
-
IP control ON / OFF of the 8 IEC outputs Total input power 16 A , switching capacity per container 8 A. Allows the switching of eight 240V consumers via Ethernet / TCP / IP or web browser. TP Ethernet port , 100 Mbit , 19 " mountable , powder -coated sheet steel housing
With Power over Ethernet (PoE) it is possible to supply ending devices via network cable not only…
Brand:
Allnet
Code:
ART-49018
MPN
ALL048900V2
EAN
4038816112279
With Power over Ethernet (PoE) it is possible to supply ending devices via network cable not only with data but also with power. This means that you do not only save a power supply, it is now possible to install the ending devices at places with no power sockets. PoE holds a big savings potential. The ALLNET LT PoE products support the IEEE802.3af standard with a performance of 15.4 watts, the IEEE802.3at standard with 30 watts and the LT PoE standard with 90 watts performance. The ALLNET product series recognizes active PoE end devices automatically and supplies them wit PoE depending on the capacity requirement. Due to the combination of switch/injector, repeater and splitter it is possible to enable distances of more than 500 meters. Not PoE capable devices can still be supplied with up to 25V power after this distance. With the CAT6 cables it is therefore achievable to transport performances up to 90 watts via PoE. Highlights: - support IEEE802.3, IEEE802.3u, IEEE802.ab,IEEE802.3af, IEEE802.3at and LT PoE 90W - 1 Port 10/100/1000 Base-T (Data) for connection to a switch, and - 1 Port 10/100/1000 Base-T (Power/Data) for connection to a PoE Device (PD) - Automatic detection of whether the connected device is PoE capable With the ALLNET ALL048900V2 High Power PoE Injector you install your PoE-enabled IP devices such as wireless access points, VoIP phones and much more totally independent of existing electrical outlets. So you can choose the best locations for example WLAN access points installations in a building regarding the wireless technology, without having to worry about power cabling. Non-PoE switches can be efficiently „upgraded“ with Power over Ethernet, especially when you only need a few ports with PoE power supply. Here the ALL048900V2 saves the expensive purchase of a PoE switch. The ALLNET ALL048900V2 supports the IEEE802.3af standard with a power of 15,4 Watt, the IEEE802.3at high power standard with 30 Watt and the LT PoE with 90 Watt power. The ALL048900V2 must not be configured. It has an RJ45 jack and an RJ-45 output connector, which are connected to this switch and the end device to the PoE injector. The cable length can here, as usual in Ethernet, up to 100 meters between the switch and terminal in total. The compact design and the metal case of the ALLNET ALL048900V2 can be very inconspicuous installed and is extremely robust.
10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x…
Brand:
Microsens
Code:
ART-09683
MPN
MS650869M-V2
EAN
-
10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x 10/100Base-TX, 3x 1000Base-X, SFP slot 3 x SFP, 8 x RJ-45, 2 x power supply · Gigabit Ethernet 10 Port Switch, 7x 10/100Base-TX, 1x10/100/1000-T, 2x 1000Base-SX/LX · 2 Fiber ports for building fault tolerant fiber rings · Manageable with Device Manager, SNMP optional · Full VLAN functionality / data prioritization according to IEEE 802.1q · Reconfiguration time · Optional with SFP · Robust casing in industrial design with integrated holder for 35 mm hat The new 10 port Gigabit Switch is equipped with two 1000Base-SX/LX Gigabit Ethernet fiber optic interfaces and therefore allows the implementation of a fault tolerant optical ring. In case of failure the MICROSENS patented technology assures the reconfiguration of the connection within less than 20 ms.
- Non-Blocking Throughput Switching Performance - Gigabit Ethernet RJ45 and SFP+/SFP Ports - Auto-Sensing IEEE 802.3af/at PoE Advanced Switching Technology for the Masses Build and expand your network with Ubiquiti Networks® EdgeSwitch™, part of the EdgeMAX® line of products. The EdgeSwitch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks. The EdgeSwitch offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability. Switching Performance The EdgeSwitch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. For its total, non-blocking throughput, the 24-port models support up to 26 Gbps, while the 48-port models support up to 70 Gbps. PoE+ Flexibility The EdgeSwitch models are available with 24 or 48 PoE Gigabit Ethernet ports of auto-sensing IEEE 802.3af/at or configurable 24V Passive PoE to simplify your infrastructure. By default, the EdgeSwitch automatically detects 802.3af/at devices so they automatically receive PoE. For 24V Passive PoE devices, manually enable 24V passive PoE using the EdgeS(more...)
- Non-Blocking Throughput Switching Performance - Gigabit Ethernet RJ45 and SFP+/SFP Ports - Auto-Sensing IEEE 802.3af/at PoE Advanced Switching Technology for the Masses Build and expand your network with Ubiquiti Networks® EdgeSwitch™, part of the EdgeMAX® line of products. The EdgeSwitch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks. The EdgeSwitch offers an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability. Switching Performance The EdgeSwitch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. For its total, non-blocking throughput, the 24-port models support up to 26 Gbps, while the 48-port models support up to 70 Gbps. PoE+ Flexibility The EdgeSwitch models are available with 24 or 48 PoE Gigabit Ethernet ports of auto-sensing IEEE 802.3af/at or configurable 24V Passive PoE to simplify your infrastructure. By default, the EdgeSwitch automatically detects 802.3af/at devices so they automatically receive PoE. For 24V Passive PoE devices, manually enable 24V passive PoE using the EdgeS(more...)
Introducing the Advanced Power over Ethernet Controllers, TOUGHSwitch PoE from Ubiquiti Networks.…
Brand:
Ubiquiti
Code:
ART-112337
MPN
ES-5XP-EU
EAN
00817882024563
Introducing the Advanced Power over Ethernet Controllers, TOUGHSwitch PoE from Ubiquiti Networks. TOUGHSwitch PoE delivers reliable passive PoE and fast 10/100/1000 Mbps connectivity to attached Ubiquiti devices and other devices that support passive PoE. To connect your PoE devices, simply enable PoE in the easy-to-use TOUGHSwitch Configuration Interface. Each port can be individually configured to provide PoE, so both PoE and non PoE devices can be connected. TOUGHSwitch is available in multiple versions to meet your deployment needs. - TOUGHSwitch PoE is a cost?effective, 5-port Gigabit switch with 24V PoE support. - TOUGHSwitch PoE PRO is an industrial-strength, 8-port Gigabit switch with 150 watts of power capable of powering 24V or 48V devices. Output voltage is controlled by the software. - TOUGHSwitch PoE CARRIER features dual TOUGHSwitch PoE PRO systems in a rack-mountable, 1U form factor with 300 watts of power supporting up to 16 devices. Simplify Your Deployment TOUGHSwitch PoE allows network architects to design cleaner, less cluttered deployments. For example, integrating one TOUGHSwitch PoE PRO can eliminate the need for the following: - 8 PoE adapters - 8 power cords - 8 power outlets 8 Etherne(more...)
The NanoSwitch is an outdoor, 4-port Gigabit switch with PoE pass-through. It is powered by 24V…
Brand:
Ubiquiti
Code:
ART-108302
MPN
N-SW
EAN
4250605529512
The NanoSwitch is an outdoor, 4-port Gigabit switch with PoE pass-through. It is powered by 24V Passive PoE and provides up to 24W of power on three PoE out ports. The NanoSwitch is designed for outdoor deployment and supports up to 4 Gbps total, non-blocking line rate.
Intelligent WISP Control Point with FiberProtect™ The EdgePoint™ offers an innovative…
Brand:
Ubiquiti
Code:
ART-77982
MPN
EP-S16-EU
EAN
00810354024283
Intelligent WISP Control Point with FiberProtect™ The EdgePoint™ offers an innovative combination of robust routing performance, fiber backhaul capability, and the convenience of passive PoE support. Breakthrough in Tower Deployment The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI), greatly improve data signal integrity, and consolidate the wired data backhaul to a single fiber cable run for long-distance connectivity. Purpose-Built for WISP Control The first application-specific designed WISP control point, the EdgePoint combines the advanced routing capabilities of EdgeMAX® with fiber backhaul and versatile powering capabilities. All-in-One Design A single, compact controller eliminates clutter, expensive cabinets, extraneous installations, and excessive maintenance. Advanced Routing Applications Powerful routing features – such as link balancing – provide redundancy and increased performance for outdoor wireless links.