Allnet-Italy | Products | Network & Wireless | Networking | Transceiver | SFP+

Articoli 16
Products per page

XM60A - GPON ONU SFP Module

XM60A - GPON ONU SFP Module Consente connessioni Internet in fibra multi-gig fino a 2,488 Gbps in…
Brand: TP-Link
Code: ART-201119
MPN
XM60A
EAN 8885020621334

TP-Link - SM6110-SR - 25Gbase-SR SFP28 LC Transceiver, 850nm…

SM6110-SR | Modulo SFP28 LC 25GBase-SR Modulo multimodale SFP+/SFP28 LC Hot-Pluggable per la massima…
Brand: TP-Link
Code: ART-200957
MPN
SM6110-SR
EAN 8885020622331

TP-Link - SM6110-LR - 25Gbase-LR SFP28 LC Transceiver, 1310 nm…

SM6110-LR | Modulo SFP28 LC 25GBase-LR Modulo monomodale SFP+/SFP28 LC Hot-Pluggable per la massima…
Brand: TP-Link
Code: ART-200956
MPN
SM6110-LR
EAN 8885020622355

Ubiquiti Short-range, SFP28-compatible optical transceiver module

Il modulo ottico multimodale da 25 Gbps è un ricetrasmettitore ottico in grado di sostenere un…
Brand: UBIQUITI
Code: ART-186059
MPN
UACC-OM-SFP28-SR
EAN -

MikroTik pair of bidirectional SFP/SFP+/SFP28 modules 1/10/25G, 15km…

MikroTik kit that contains two SFP+ modules that can be used as a pair to achieve operating data…
Brand: MikroTik
Code: ART-162009
MPN
XS+2733LC15D
EAN -

Cambium - 10G SFP+ SMF LR Transceiver, 1310nm. -40C to 85C

This 1310 nm DFB 10Gbps SFP+ transceiver is a “limiting module”, designed for 10GBASE-LR…
Brand: Cambium Networks
Code: ART-152750
MPN
SFP-10G-LR
EAN -
The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector. The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-SR standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. A logic “1,” or no connection on this pin will disable the laser from transmitting. A logic “0” on this pin provides normal operation. The transmitter has an internal automatic power control loop (APC) to ensure constant optical power output across supply voltage and temperature variations. An open collector compatible Transmit Fault (TFault) is provided. TX_Fault is a module output contact that when high, indicates that the module transmitter has detected a fault condition related to laser operation or safety. The TX_Fault output contact is an open drain/collector and shall be pulled up to the Vcc_Host in the host with a resistor in the range 4.7-10 k?. TX_Disable is a module input contact. When TX_Disable is asserted high or left open, the SFP+ module transmitter output shall be turned off. This contact shall be pulled up to VccT with a 4.7 k? to 10 k? resistor The receiver converts 10Gbit/s serial optical data into serial PECL/CML electrical data. An open collector compatible Loss of Signal is provided. Rx_LOS when high indicates an optical signal level below that specified in the relevant standard. The Rx_LOS contact is an open drain/collector output and shall be pulled up to Vcc_Host in the host with a resistor in the range 4.7-10 k?, or with an active termination. Power supply filtering is recommended for both the transmitter and receiver. The Rx_LOS signal is intended as a preliminary indication to the system in which the SFP+ is installed that the received signal strength is below the specified range. Such an indication typically points to non-installed cables, broken cables, or a disabled, failing or a powered off transmitter at the far end of the cable.

Cambium - 10G SFP+ MMF SR Transceiver, 850nm. -40C to 85C

The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The…
Brand: Cambium Networks
Code: ART-152748
MPN
SFP-10G-SR
EAN 5704174389774

Mikrotik S+31DLC10D 10000Mbit/s SFP+ 1310nm Single-mode network…

S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode…
Brand: MikroTik
Code: ART-155178
MPN
XS+31LC10D
EAN -

Ubiquiti Networks UF-MM-10G network transceiver module Fiber optic…

Multi-mode, duplex, fiber transceiver module. The 10 Gbps Multi-mode Optical Module is a duplex…
Brand: UBIQUITI
Code: ART-152199
MPN
UACC-OM-MM-10G-D-2
EAN 0810010076908

ALLNET ALL4757 network transceiver module 10300 Mbit/s SFP+ 850 nm

ALLNET ALL4757. Maximum data transfer rate: 10300 Mbit/s, Interface type: SFP+, Fiber optic…
Brand: Allnet
Code: ART-152233
MPN
ALL4757
EAN -
Viewed
case form title case form subtitle
company *
email *
name *
surname *
comment
privacy * accept conditions
* mandatory fields