Allnet-Italy | Products | Surveillance, Access Management, IoT | Video surveillance

Categorie

Surveillance, Access Management, IoT

Courses and Vendor Services

RFID tracking systems

Sensors

Intercoms and Access control

Video surveillance

Accessories

Registration/ Visualization

Telecamere HDCVI Outdoor

PTZ

Outdoor IP cameras

Thermal imaging cameras

Wearable cameras

Smart Infrastructure & Connectivity

Physical security information management (PSIM)

Audible paging systems

Parking & Traffic

Robotics & Service Automation

Filters

close

Used

Manufacturer

• Allnet
• Axis
• Dahua
• FLIR
• MILESIGHT IoT
• Milesight TVCC
• Mobotix
• QNAP
• Reveal Media
• TELTONIKA
• TP-Link
• Ubiquiti
• Vigilate

Reset filters

Go to Results

Articoli 1589

Products per page

12 24 36 48

Brand

Stock available End User Best Price

Axis T8129

Axis

ART-40622

MPN: 5025-281

EAN   7331021003972

Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance, a switch is normally used as a repeater, or optical fiber may be used. To overcome this distance limit, network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable, and forward the rest to the camera. Dependent on midspan and camera type, the connection in total can be between 200-400 meters (656-1312 ft.). Compatibility AXIS T8129 PoE Extender is compatible with all Axis network video products supporting PoE, and it is both IEEE 802.3af and IEEE 802.3at compliant. Check in the Set-up tab for information typical connections with Axis network video products. Range Range depends on the power required, so a 25 watt PTZ dome camera may be located 200 m (656 ft.) away using a single AXIS T8129. Or, the cable length to a regular 5 watt network camera may extend up to 400 m (1312 ft.), by fitting three AXIS T8129 at 100 m (328 ft.) intervals. Check in the Range tab for information about Maximum distances. No additional power supply AXIS T8129 does not require any additional power supply and the connected network camera is fed by a single PoE switch or midspan. It offers two female Ethernet ports, which are both configured automatically for link speed, duplex and crossover and the full-rate network throughput is maintained.

Axis T8129

Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed…

Brand: Axis

Code: ART-40622

MPN

5025-281

EAN 7331021003972

Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance, a switch is normally used as a repeater, or optical fiber may be used. To overcome this distance limit, network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable, and forward the rest to the camera. Dependent on midspan and camera type, the connection in total can be between 200-400 meters (656-1312 ft.). Compatibility AXIS T8129 PoE Extender is compatible with all Axis network video products supporting PoE, and it is both IEEE 802.3af and IEEE 802.3at compliant. Check in the Set-up tab for information typical connections with Axis network video products. Range Range depends on the power required, so a 25 watt PTZ dome camera may be located 200 m (656 ft.) away using a single AXIS T8129. Or, the cable length to a regular 5 watt network camera may extend up to 400 m (1312 ft.), by fitting three AXIS T8129 at 100 m (328 ft.) intervals. Check in the Range tab for information about Maximum distances. No additional power supply AXIS T8129 does not require any additional power supply and the connected network camera is fed by a single PoE switch or midspan. It offers two female Ethernet ports, which are both configured automatically for link speed, duplex and crossover and the full-rate network throughput is maintained.

Brand: Axis

Code: ART-40622

MPN

5025-281

EAN 7331021003972

Reorder available

tempo di riapprovigionamento 8 Days

Your Price

INFO

Axis 01148-001 PoE adapter

Axis

ART-117142

MPN: 01148-001

EAN   7331021061071

Wide compatibility Compatible with all Axis network video products, AXIS T8129-E Outdoor PoE Extender supports PoE, and it is both IEEE 802.3af, IEEE 802.3at and High PoE 60 W compliant. With its rugged, IP66/IP67-rated enclosure, AXIS T8129-E withstands harsh environmental conditions and challenging temperatures. AXIS T8129-E Outdoor PoE Extender offers a smart and easy-to-install solution for extending the range of your network – with no additional power supply. Without being restricted by the 100m (328ft.) limit for Ethernet cables, Axis network video products can be installed at greater distances. Simply connect AXIS T8129-E in-line with the CAT5e or CAT6 cable and power is forwarded to your Axis network video product. Range depends on the power required so depending on midspan and camera type the connection can in total be between 200-400 meters (656-1312 ft.). For instance, a 25 watt PTZ dome camera may be located 200 m (656 ft.) away using a single AXIS T8129-E. Or, the cable length to a regular 5 watt network camera may extend up to 400 m (1312 ft.), by fitting three AXIS T8129-E at 100 m (328 ft.) intervals. No additional power supply AXIS T8129-E does not require any additional power supply and the connected network camera is fed by a single PoE switch or midspan. It offers two female Ethernet ports, which are both configured automatically for link speed, duplex and crossover and the full-rate network throughput is maintained.

Axis 01148-001 PoE adapter

Wide compatibility Compatible with all Axis network video products, AXIS T8129-E Outdoor PoE…

Brand: Axis

Code: ART-117142

MPN

01148-001

EAN 7331021061071

Wide compatibility Compatible with all Axis network video products, AXIS T8129-E Outdoor PoE Extender supports PoE, and it is both IEEE 802.3af, IEEE 802.3at and High PoE 60 W compliant. With its rugged, IP66/IP67-rated enclosure, AXIS T8129-E withstands harsh environmental conditions and challenging temperatures. AXIS T8129-E Outdoor PoE Extender offers a smart and easy-to-install solution for extending the range of your network – with no additional power supply. Without being restricted by the 100m (328ft.) limit for Ethernet cables, Axis network video products can be installed at greater distances. Simply connect AXIS T8129-E in-line with the CAT5e or CAT6 cable and power is forwarded to your Axis network video product. Range depends on the power required so depending on midspan and camera type the connection can in total be between 200-400 meters (656-1312 ft.). For instance, a 25 watt PTZ dome camera may be located 200 m (656 ft.) away using a single AXIS T8129-E. Or, the cable length to a regular 5 watt network camera may extend up to 400 m (1312 ft.), by fitting three AXIS T8129-E at 100 m (328 ft.) intervals. No additional power supply AXIS T8129-E does not require any additional power supply and the connected network camera is fed by a single PoE switch or midspan. It offers two female Ethernet ports, which are both configured automatically for link speed, duplex and crossover and the full-rate network throughput is maintained.

Brand: Axis

Code: ART-117142

MPN

01148-001

EAN 7331021061071

Reorder available

tempo di riapprovigionamento 11 Days

Your Price

INFO

Axis A9188 digital/analogue I/O module Relay channel

Axis

ART-87189

MPN: 0820-001

EAN   7331021049895

- 8 I/Os with supervised inputs and configurable levels - 8 form C relays - 12 and 24 V DC output - PoE+ or 12 and 24 V DC input - Open API for software integration, including VAPIX Intelligent module with supervised inputs AXIS A9188 Network I/O Relay Module is an intelligent module with configurable I/Os and relays and supports supervised inputs. With its open platform it offers a high level of integration with AXIS A1001 Network Door Controller and other facility systems, such as elevator control for floor management and HVAC (Heating, ventilation and AC) systems. It can also be used with AXIS Video Hosting System, AXIS Camera Station or third party partner software. The module provides power to I/O devices and can extend the functionality of any Axis product where you need additional I/Os or relays.

Axis A9188 digital/analogue I/O module Relay channel

- 8 I/Os with supervised inputs and configurable levels - 8 form C relays - 12 and 24 V DC output -…

Brand: Axis

Code: ART-87189

MPN

0820-001

EAN 7331021049895

- 8 I/Os with supervised inputs and configurable levels - 8 form C relays - 12 and 24 V DC output - PoE+ or 12 and 24 V DC input - Open API for software integration, including VAPIX Intelligent module with supervised inputs AXIS A9188 Network I/O Relay Module is an intelligent module with configurable I/Os and relays and supports supervised inputs. With its open platform it offers a high level of integration with AXIS A1001 Network Door Controller and other facility systems, such as elevator control for floor management and HVAC (Heating, ventilation and AC) systems. It can also be used with AXIS Video Hosting System, AXIS Camera Station or third party partner software. The module provides power to I/O devices and can extend the functionality of any Axis product where you need additional I/Os or relays.

Brand: Axis

Code: ART-87189

MPN

0820-001

EAN 7331021049895

in arrivo

Data	Quantita	Date Confirmed
03.05.26	1	No

Your Price

INFO

Axis F7315 signal cable 15 m White

Axis

ART-75442

MPN: 5506-821

EAN   7331021049161

AXIS F7315 comes in packs of four, 15-m (49 ft.) white cable for connection to an AXIS F1004 Sensor Unit.

Axis F7315 signal cable 15 m White

AXIS F7315 comes in packs of four, 15-m (49 ft.) white cable for connection to an AXIS F1004 Sensor…

Brand: Axis

Code: ART-75442

MPN

5506-821

EAN 7331021049161

AXIS F7315 comes in packs of four, 15-m (49 ft.) white cable for connection to an AXIS F1004 Sensor Unit.

Brand: Axis

Code: ART-75442

MPN

5506-821

EAN 7331021049161

Reorder available

tempo di riapprovigionamento 9 Days

Your Price

INFO

Axis Camera Station 5 CORE 1 license(s)

Axis

ART-87581

MPN: 0879-010

EAN   5712505901816

- A proven video management system - Optimized for Axis’ network video products - Quick system setup and intuitive operation - Efficient investigation and high definition identification - Extensive support organization Optimized for small- to mid-sized installations AXIS Camera Station is the ideal solution to meet the needs for efficient surveillance of small- and midsized installations, such as retail shops, hotels, schools and manufacturing sites – a proven solution with more than 50,000 installations worldwide. It is designed to perfectly match Axis’ wide range of network video products and product features to optimize system reliability. Ease of operation in focus A setup wizard with automatic camera discovery guides you through every step of the setup process. This allows the system to be up and running within minutes. AXIS Camera Station is developed with focus on ease of use and intuitive operation, ensuring that anyone can effectively manage incidents and quickly export high definition evidence. AXIS Camera Station allows the user to add useful functionality such as AXIS A8004?VE Network Video Door Station for audiovisual identification and remote entry control, as well as AXIS C3003?E Network Horn Speaker that enables an operator to remotely address people and deter unwanted activity. Staying with our customers all the way Axis’ strong presence in the market with local sales and support contacts worldwide and the extensive language support offered by AXIS Camera Station secures a reliable and efficient operation – We stay with our customers all the way.

Axis Camera Station 5 CORE 1 license(s)

- A proven video management system - Optimized for Axis’ network video products - Quick system…

Brand: Axis

Code: ART-87581

MPN

0879-010

EAN 5712505901816

- A proven video management system - Optimized for Axis’ network video products - Quick system setup and intuitive operation - Efficient investigation and high definition identification - Extensive support organization Optimized for small- to mid-sized installations AXIS Camera Station is the ideal solution to meet the needs for efficient surveillance of small- and midsized installations, such as retail shops, hotels, schools and manufacturing sites – a proven solution with more than 50,000 installations worldwide. It is designed to perfectly match Axis’ wide range of network video products and product features to optimize system reliability. Ease of operation in focus A setup wizard with automatic camera discovery guides you through every step of the setup process. This allows the system to be up and running within minutes. AXIS Camera Station is developed with focus on ease of use and intuitive operation, ensuring that anyone can effectively manage incidents and quickly export high definition evidence. AXIS Camera Station allows the user to add useful functionality such as AXIS A8004?VE Network Video Door Station for audiovisual identification and remote entry control, as well as AXIS C3003?E Network Horn Speaker that enables an operator to remotely address people and deter unwanted activity. Staying with our customers all the way Axis’ strong presence in the market with local sales and support contacts worldwide and the extensive language support offered by AXIS Camera Station secures a reliable and efficient operation – We stay with our customers all the way.

Brand: Axis

Code: ART-87581

MPN

0879-010

EAN 5712505901816

Reorder available

tempo di riapprovigionamento 5 Days

Your Price

INFO

Axis Camera Station 5 UNIVERSAL 1 license(s)

Axis

ART-87582

MPN: 0879-020

- A proven video management system - Optimized for Axis’ network video products - Quick system setup and intuitive operation - Efficient investigation and high definition identification - Extensive support organization Optimized for small- to mid-sized installations AXIS Camera Station is the ideal solution to meet the needs for efficient surveillance of small- and midsized installations, such as retail shops, hotels, schools and manufacturing sites – a proven solution with more than 50,000 installations worldwide. It is designed to perfectly match Axis’ wide range of network video products and product features to optimize system reliability. Ease of operation in focus A setup wizard with automatic camera discovery guides you through every step of the setup process. This allows the system to be up and running within minutes. AXIS Camera Station is developed with focus on ease of use and intuitive operation, ensuring that anyone can effectively manage incidents and quickly export high definition evidence. AXIS Camera Station allows the user to add useful functionality such as AXIS A8004?VE Network Video Door Station for audiovisual identification and remote entry control, as well as AXIS C3003?E Network Horn Speaker that enables an operator to remotely address people and deter unwanted activity. Staying with our customers all the way Axis’ strong presence in the market with local sales and support contacts worldwide and the extensive language support offered by AXIS Camera Station secures a reliable and efficient operation – We stay with our customers all the way.

Axis Camera Station 5 UNIVERSAL 1 license(s)

- A proven video management system - Optimized for Axis’ network video products - Quick system…

Brand: Axis

Code: ART-87582

MPN

0879-020

EAN -

- A proven video management system - Optimized for Axis’ network video products - Quick system setup and intuitive operation - Efficient investigation and high definition identification - Extensive support organization Optimized for small- to mid-sized installations AXIS Camera Station is the ideal solution to meet the needs for efficient surveillance of small- and midsized installations, such as retail shops, hotels, schools and manufacturing sites – a proven solution with more than 50,000 installations worldwide. It is designed to perfectly match Axis’ wide range of network video products and product features to optimize system reliability. Ease of operation in focus A setup wizard with automatic camera discovery guides you through every step of the setup process. This allows the system to be up and running within minutes. AXIS Camera Station is developed with focus on ease of use and intuitive operation, ensuring that anyone can effectively manage incidents and quickly export high definition evidence. AXIS Camera Station allows the user to add useful functionality such as AXIS A8004?VE Network Video Door Station for audiovisual identification and remote entry control, as well as AXIS C3003?E Network Horn Speaker that enables an operator to remotely address people and deter unwanted activity. Staying with our customers all the way Axis’ strong presence in the market with local sales and support contacts worldwide and the extensive language support offered by AXIS Camera Station secures a reliable and efficient operation – We stay with our customers all the way.

Brand: Axis

Code: ART-87582

MPN

0879-020

stock 2

Your Price

INFO

Axis Perimeter Defender

Axis

ART-87579

MPN: 0333-608

- Scalable perimeter protection - High detection accuracy - Multiple detection scenarios - i-LIDS certified - Easy and intuitive installation AXIS Perimeter Defender is a flexible, scalable video analytics application for perimeter surveillance and protection. It’s designed for demanding large-scale installations. Your first layer of defense AXIS Perimeter Defender gives you an edge where security starts – at the perimeter of your facilities. It’s ideal for reinforcing physical access control for high-security facilities such as chemical plants, power plants and prisons and for critical infrastructure. Together with Axis network cameras, horn speakers, and video management software, AXIS Perimeter Defender comprises a comprehensive video-based solution for effective perimeter protection. And it’s i-LIDS certified as a primary detection system for monitoring sterile zones. Detect, verify, act AXIS Perimeter Defender provides accurate detection capabilities with support for multiple detection scenarios. This includes several types of intrusion detection and loitering. AXIS Perimeter Defender enable detection of multiple events occurring simultaneously in different places. It analyses detected events, dismisses non-threatening ones and notifies security staff of potentially critical situations. Your staff can then choose to view detailed video footage to determine the precise nature of the threat – and act accordingly. The result is accurate detection and minimal false alarms. Security that grows with you You can integrate AXIS Perimeter Defender into as many cameras as you want, here and now, and add more cameras as your needs grow. As AXIS Perimeter Defender analyzes video-footage data on the cameras themselves, it doesn´t require a central server for processing. Whether installed on one or on 50 cameras, there’s no need for system redesign or expensive hardware replacements each time a new camera is added to the network. And once everything is in place, the entire system can be controlled from a single interface and location. Installation that’s as easy as 1, 2, 3 Installing and setting up AXIS Perimeter Defender is fast, simple and cost-effective. You can deploy and configure it simultaneously on multiple cameras. AXIS Perimeter Defender supports a range of alarm outputs and integrates with your video management systems, providing you with immediate feedback on potential security incidents. And it has all the features needed for easy implementation, including intuitive system-design tools and automatic calibration. Support and upgrades are included in the license.

Axis Perimeter Defender

- Scalable perimeter protection - High detection accuracy - Multiple detection scenarios - i-LIDS…

Brand: Axis

Code: ART-87579

MPN

0333-608

EAN -

- Scalable perimeter protection - High detection accuracy - Multiple detection scenarios - i-LIDS certified - Easy and intuitive installation AXIS Perimeter Defender is a flexible, scalable video analytics application for perimeter surveillance and protection. It’s designed for demanding large-scale installations. Your first layer of defense AXIS Perimeter Defender gives you an edge where security starts – at the perimeter of your facilities. It’s ideal for reinforcing physical access control for high-security facilities such as chemical plants, power plants and prisons and for critical infrastructure. Together with Axis network cameras, horn speakers, and video management software, AXIS Perimeter Defender comprises a comprehensive video-based solution for effective perimeter protection. And it’s i-LIDS certified as a primary detection system for monitoring sterile zones. Detect, verify, act AXIS Perimeter Defender provides accurate detection capabilities with support for multiple detection scenarios. This includes several types of intrusion detection and loitering. AXIS Perimeter Defender enable detection of multiple events occurring simultaneously in different places. It analyses detected events, dismisses non-threatening ones and notifies security staff of potentially critical situations. Your staff can then choose to view detailed video footage to determine the precise nature of the threat – and act accordingly. The result is accurate detection and minimal false alarms. Security that grows with you You can integrate AXIS Perimeter Defender into as many cameras as you want, here and now, and add more cameras as your needs grow. As AXIS Perimeter Defender analyzes video-footage data on the cameras themselves, it doesn´t require a central server for processing. Whether installed on one or on 50 cameras, there’s no need for system redesign or expensive hardware replacements each time a new camera is added to the network. And once everything is in place, the entire system can be controlled from a single interface and location. Installation that’s as easy as 1, 2, 3 Installing and setting up AXIS Perimeter Defender is fast, simple and cost-effective. You can deploy and configure it simultaneously on multiple cameras. AXIS Perimeter Defender supports a range of alarm outputs and integrates with your video management systems, providing you with immediate feedback on potential security incidents. And it has all the features needed for easy implementation, including intuitive system-design tools and automatic calibration. Support and upgrades are included in the license.

Brand: Axis

Code: ART-87579

MPN

0333-608

Reorder available

tempo di riapprovigionamento 8 Days

Your Price

INFO

Axis T98A15-VE Housing & mount

Axis

ART-40559

MPN: 5900-151

EAN   7331021003675

Vandal-resistant to withstand adversities The polycarbonate, AXIS T98A-VE Surveillance Cabinet Series is IP66-rated for protection against the ingress of dust and high pressure water jets from any direction. The NEMA 4X rating protects against windblown dust, salt spray, rain, hose-directed water, and damage from external ice formation. It provides also IK10-rated material for protection against impact and vandalism. The surveillance cabinets support vibration rating 4M4 and 4M3 (AXIS T98A18-VE). Step-by-step installation The modularity of AXIS T98A-VE Surveillance Cabinet Series enables different categories of installers to do their part time separated in order to optimize the workflow. - Firstly, the installer mounts AXIS T98A-VE Mounting Plate with cable protection - Secondly, the certified electrician mounts the mains power parts and cover them with the power cover - Thirdly, the installer can finalize the installation of the low-voltage units Ease of installation AXIS T98A-VE offers several ease of installation features to simplify the work for the installers. With a selection of optional mounting brackets, AXIS T98A-VE Mounting Plate can be installed on a wall, pole or building corner. The polycarbonate cabinet base is extremely lightweight that can be easily carried in one hand. The cabinet door can be left or right hinged, thanks to removable hinge pins. Furthermore, the hinges have a stop that locks the cabinet door at 105° to avoid that the door hits back the installer. A DIN rail is pre-mounted for those units that can be snapped on it by using a DIN rail clip. A molded DIN rail is also designed on the inner right-side of the cabinet base. The cabinet base can hang on the hooks of the mounted plate while cables are routed and connected. In a secondary step the cabinet base is slid and secured on the mounting plate with screws. Separated compartments to enhance security For better installation and improve cost efficiency, the inner compartment with a DIN rail can be split into two sections: one to fit mains power units and a second for low-voltage units that do not require installation by a certified electrician. An optional electrical safety kit is available, which includes surge protection, a fuse and an alarm-door switch to detect cabinet intrusion or damage.

Axis T98A15-VE Housing & mount

Vandal-resistant to withstand adversities The polycarbonate, AXIS T98A-VE Surveillance Cabinet…

Brand: Axis

Code: ART-40559

MPN

5900-151

EAN 7331021003675

Vandal-resistant to withstand adversities The polycarbonate, AXIS T98A-VE Surveillance Cabinet Series is IP66-rated for protection against the ingress of dust and high pressure water jets from any direction. The NEMA 4X rating protects against windblown dust, salt spray, rain, hose-directed water, and damage from external ice formation. It provides also IK10-rated material for protection against impact and vandalism. The surveillance cabinets support vibration rating 4M4 and 4M3 (AXIS T98A18-VE). Step-by-step installation The modularity of AXIS T98A-VE Surveillance Cabinet Series enables different categories of installers to do their part time separated in order to optimize the workflow. - Firstly, the installer mounts AXIS T98A-VE Mounting Plate with cable protection - Secondly, the certified electrician mounts the mains power parts and cover them with the power cover - Thirdly, the installer can finalize the installation of the low-voltage units Ease of installation AXIS T98A-VE offers several ease of installation features to simplify the work for the installers. With a selection of optional mounting brackets, AXIS T98A-VE Mounting Plate can be installed on a wall, pole or building corner. The polycarbonate cabinet base is extremely lightweight that can be easily carried in one hand. The cabinet door can be left or right hinged, thanks to removable hinge pins. Furthermore, the hinges have a stop that locks the cabinet door at 105° to avoid that the door hits back the installer. A DIN rail is pre-mounted for those units that can be snapped on it by using a DIN rail clip. A molded DIN rail is also designed on the inner right-side of the cabinet base. The cabinet base can hang on the hooks of the mounted plate while cables are routed and connected. In a secondary step the cabinet base is slid and secured on the mounting plate with screws. Separated compartments to enhance security For better installation and improve cost efficiency, the inner compartment with a DIN rail can be split into two sections: one to fit mains power units and a second for low-voltage units that do not require installation by a certified electrician. An optional electrical safety kit is available, which includes surge protection, a fuse and an alarm-door switch to detect cabinet intrusion or damage.

Brand: Axis

Code: ART-40559

MPN

5900-151

EAN 7331021003675

Reorder available

tempo di riapprovigionamento 27 Days

Your Price

INFO

Axis Perimeter Defender

Axis

ART-87580

MPN: 0333-609

- Scalable perimeter protection - High detection accuracy - Multiple detection scenarios - i-LIDS certified - Easy and intuitive installation AXIS Perimeter Defender is a flexible, scalable video analytics application for perimeter surveillance and protection. It’s designed for demanding large-scale installations. Your first layer of defense AXIS Perimeter Defender gives you an edge where security starts – at the perimeter of your facilities. It’s ideal for reinforcing physical access control for high-security facilities such as chemical plants, power plants and prisons and for critical infrastructure. Together with Axis network cameras, horn speakers, and video management software, AXIS Perimeter Defender comprises a comprehensive video-based solution for effective perimeter protection. And it’s i-LIDS certified as a primary detection system for monitoring sterile zones. Detect, verify, act AXIS Perimeter Defender provides accurate detection capabilities with support for multiple detection scenarios. This includes several types of intrusion detection and loitering. AXIS Perimeter Defender enable detection of multiple events occurring simultaneously in different places. It analyses detected events, dismisses non-threatening ones and notifies security staff of potentially critical situations. Your staff can then choose to view detailed video footage to determine the precise nature of the threat – and act accordingly. The result is accurate detection and minimal false alarms. Security that grows with you You can integrate AXIS Perimeter Defender into as many cameras as you want, here and now, and add more cameras as your needs grow. As AXIS Perimeter Defender analyzes video-footage data on the cameras themselves, it doesn´t require a central server for processing. Whether installed on one or on 50 cameras, there’s no need for system redesign or expensive hardware replacements each time a new camera is added to the network. And once everything is in place, the entire system can be controlled from a single interface and location. Installation that’s as easy as 1, 2, 3 Installing and setting up AXIS Perimeter Defender is fast, simple and cost-effective. You can deploy and configure it simultaneously on multiple cameras. AXIS Perimeter Defender supports a range of alarm outputs and integrates with your video management systems, providing you with immediate feedback on potential security incidents. And it has all the features needed for easy implementation, including intuitive system-design tools and automatic calibration. Support and upgrades are included in the license.

Axis Perimeter Defender

- Scalable perimeter protection - High detection accuracy - Multiple detection scenarios - i-LIDS…

Brand: Axis

Code: ART-87580

MPN

0333-609

EAN -

- Scalable perimeter protection - High detection accuracy - Multiple detection scenarios - i-LIDS certified - Easy and intuitive installation AXIS Perimeter Defender is a flexible, scalable video analytics application for perimeter surveillance and protection. It’s designed for demanding large-scale installations. Your first layer of defense AXIS Perimeter Defender gives you an edge where security starts – at the perimeter of your facilities. It’s ideal for reinforcing physical access control for high-security facilities such as chemical plants, power plants and prisons and for critical infrastructure. Together with Axis network cameras, horn speakers, and video management software, AXIS Perimeter Defender comprises a comprehensive video-based solution for effective perimeter protection. And it’s i-LIDS certified as a primary detection system for monitoring sterile zones. Detect, verify, act AXIS Perimeter Defender provides accurate detection capabilities with support for multiple detection scenarios. This includes several types of intrusion detection and loitering. AXIS Perimeter Defender enable detection of multiple events occurring simultaneously in different places. It analyses detected events, dismisses non-threatening ones and notifies security staff of potentially critical situations. Your staff can then choose to view detailed video footage to determine the precise nature of the threat – and act accordingly. The result is accurate detection and minimal false alarms. Security that grows with you You can integrate AXIS Perimeter Defender into as many cameras as you want, here and now, and add more cameras as your needs grow. As AXIS Perimeter Defender analyzes video-footage data on the cameras themselves, it doesn´t require a central server for processing. Whether installed on one or on 50 cameras, there’s no need for system redesign or expensive hardware replacements each time a new camera is added to the network. And once everything is in place, the entire system can be controlled from a single interface and location. Installation that’s as easy as 1, 2, 3 Installing and setting up AXIS Perimeter Defender is fast, simple and cost-effective. You can deploy and configure it simultaneously on multiple cameras. AXIS Perimeter Defender supports a range of alarm outputs and integrates with your video management systems, providing you with immediate feedback on potential security incidents. And it has all the features needed for easy implementation, including intuitive system-design tools and automatic calibration. Support and upgrades are included in the license.

Brand: Axis

Code: ART-87580

MPN

0333-609

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

Axis 5017-041 security camera accessory Mount

Axis

ART-39354

MPN: 5017-041

EAN   7331021037588

Holding device for pendant mounted cameras. For use with 3/4" NPS or NPT pipes. Compatible with all cameras with standard tripod threading.

Axis 5017-041 security camera accessory Mount

Holding device for pendant mounted cameras. For use with 3/4" NPS or NPT pipes. Compatible with all…

Brand: Axis

Code: ART-39354

MPN

5017-041

EAN 7331021037588

Holding device for pendant mounted cameras. For use with 3/4" NPS or NPT pipes. Compatible with all cameras with standard tripod threading.

Brand: Axis

Code: ART-39354

MPN

5017-041

EAN 7331021037588

Reorder available

tempo di riapprovigionamento 16 Days

Your Price

INFO

Ubiquiti Networks UVC-G3-LED

Ubiquiti

ART-78037

MPN: UVC-G3-LED

EAN   00810354023361

Infrared Range Extender The optional IR Range Extender accessory, model UVC-G3-LED, significantly extends the night vision range to up to 25 m (82 ft).

Ubiquiti Networks UVC-G3-LED

Infrared Range Extender The optional IR Range Extender accessory, model UVC-G3-LED, significantly…

Brand: Ubiquiti

Code: ART-78037

MPN

UVC-G3-LED

EAN 00810354023361

Infrared Range Extender The optional IR Range Extender accessory, model UVC-G3-LED, significantly extends the night vision range to up to 25 m (82 ft).

Brand: Ubiquiti

Code: ART-78037

MPN

UVC-G3-LED

EAN 00810354023361

stock 91

Your Price

INFO

Ubiquiti Networks UVC-G4-PRO security camera IP security camera Indoor…

Ubiquiti

ART-125689

MPN: UVC-G4-PRO

EAN   810084690246

4K Indoor/Outdoor IP Camera with Infrared and Optical Zoom Ideal for scalable day and night surveillance, the G4 Pro Camera features advanced hardware and optics for 4K Ultra HD video and analytic capabilities. Capture Every Detail with 4K Resolution G4 Pro Camera The G4-PRO is our most powerful camera yet, with a large 1/1.8" sensor, 3X powered optical zoom lens, and integrated high-power infrared LEDs for night vision. The adjustable base can be mounted to a flat surface or a pole. Enhanced Low-Light Performance The wide-aperture lens, oversized image sensor, and high-power LEDs deliver exceptional clarity and low-light performance. UniFi Protect Software UniFi Protect Controller is a powerful integrated IP video surveillance platform designed to work with UniFi Protect cameras and the UniFi Protect app. Manage Cameras with All-New Cloud Key Gen2 Plus Designed for easy setup and rapid deployment, the Cloud Key Gen2 Plus is a compact, plug-and-play solution for managing your cameras. Record up to 1600 hours of footage with the included 1 TB hard drive, or upgrade the hard drive to store even more video. Versatile Mounting Options The G4 Pro Camera offers aiming flexibility and can be mounted quickly on a wall, ceiling, or pole.

Ubiquiti Networks UVC-G4-PRO security camera IP security camera Indoor…

4K Indoor/Outdoor IP Camera with Infrared and Optical Zoom Ideal for scalable day and night…

Brand: Ubiquiti

Code: ART-125689

MPN

UVC-G4-PRO

EAN 810084690246

4K Indoor/Outdoor IP Camera with Infrared and Optical Zoom Ideal for scalable day and night surveillance, the G4 Pro Camera features advanced hardware and optics for 4K Ultra HD video and analytic capabilities. Capture Every Detail with 4K Resolution G4 Pro Camera The G4-PRO is our most powerful camera yet, with a large 1/1.8" sensor, 3X powered optical zoom lens, and integrated high-power infrared LEDs for night vision. The adjustable base can be mounted to a flat surface or a pole. Enhanced Low-Light Performance The wide-aperture lens, oversized image sensor, and high-power LEDs deliver exceptional clarity and low-light performance. UniFi Protect Software UniFi Protect Controller is a powerful integrated IP video surveillance platform designed to work with UniFi Protect cameras and the UniFi Protect app. Manage Cameras with All-New Cloud Key Gen2 Plus Designed for easy setup and rapid deployment, the Cloud Key Gen2 Plus is a compact, plug-and-play solution for managing your cameras. Record up to 1600 hours of footage with the included 1 TB hard drive, or upgrade the hard drive to store even more video. Versatile Mounting Options The G4 Pro Camera offers aiming flexibility and can be mounted quickly on a wall, ceiling, or pole.

Brand: Ubiquiti

Code: ART-125689

MPN

UVC-G4-PRO

EAN 810084690246

Reorder available

tempo di riapprovigionamento 18 Days

Your Price

INFO

Page 123 of 133 123 124 125 126 127 128 129 130 131 132