Robust and sleek housings with smart features -40 °C/ °F with IEEE 802.3af AXIS T93F10/T93F20…
Brand:
Axis
Code:
ART-71320
MPN
5900-271
EAN
7331021048317
Robust and sleek housings with smart features -40 °C/ °F with IEEE 802.3af AXIS T93F10/T93F20 Outdoor Housing can power the camera and its heater and has a temperature range from -40 °C to 60 °C (-40 °F to 140 °F) for the housing itself. The temperature range in running operation depends on the camera model. For more information please check the datasheet. AXIS T93F10 is suitable when AC/DC power is a requirement. The outdoor housing can be powered with 24 V AC or 12-24 V DC and no midspan is required. AXIS T93F20 is very power efficient and only requires 15 W PoE at a cold start in -40 °C/°F. AXIS T93F05 Protective Housing is a pure protective enclosure and does not have any electronics inside. Therefore, the lower temperature specification is 0 °C. Features to protect what you value AXIS T93F Housing Series has IP66 and NEMA 4X protection rating against the ingress of dust, windblown dust, rain, high-pressure water jets from any direction, hose-directed water, and damage from external ice formation. IK10-rated for protection against impact and vandal acts. In addition, the cables are vandal protected and it is prepared to accommodate an optional alarm switch that triggers at vandal attempts. See here for more information about the IP rating system. Corridor format As optional accessory, two brackets are available. AXIS Corridor Format Bracket A for AXIS T93F05/T93F20 Housings and AXIS Corridor Format Bracket B for AXIS T93F05/T93F10 Housings. The brackets can be purchased if the fixed camera needs to be installed in a Corridor Format, but keeping the housing straight. The Corridor Format installation is particularly suitable for surveillance of narrow alleys or perimeters. Ease of installation AXIS T93F Series is out-of-the-box ready for installation outdoors. AXIS T94Q01A Wall Mount is included. For installations involving protective pipes, AXIS T94R01P Conduit Back Box (optional accessory) should be used. Threaded holes underneath the housing simplify installation of Axis Illuminators. Extra room for more AXIS T93F Housing Series offers an empty space behind the camera, useful if a larger lens is needed for the camera or to place other devices.
Conduit back box for 1/2" or M20 pipes. Features the 1/2" ACI interface to enable use of ACI…
Brand:
Axis
Code:
ART-86871
MPN
5507-401
EAN
7331021053151
Conduit back box for 1/2" or M20 pipes. Features the 1/2" ACI interface to enable use of ACI adapters. There is an integrated female tripod thread for use of standard camera stands or holders.
For any surfaces AXIS T94Q01F Ceiling-and-Column Mount is made in powder-coated aluminum. It is…
Brand:
Axis
Code:
ART-98644
MPN
5507-591
EAN
7331021054424
For any surfaces AXIS T94Q01F Ceiling-and-Column Mount is made in powder-coated aluminum. It is suitable for both ceiling or soffit and column or parapet installations. This allows Axis’ fixed camera housings to be mounted under hard surfaces such as ceilings, beams, soffits and canopies. The versatile design of AXIS T94Q01F also allows to be mounted on pole or column tops, parapets and other horizontal building structures. Smart design. Protection guaranteed The swivel arm features an easy re-direction of the camera and its maintenance is made a lot easier. The mount applies to NEMA 4X ratings for protection against windblown dust, salt spray, rain, hose-directed water, and damage from external ice formation. It is also compliant to IK10 rating for protection against impact and vandal acts. The cable is routed through the pipe, and is never exposed to weather or potential vandalism. If you are looking for even more protection, cable conduits and Axis’ conduit adapters – with 3/4” dimension – can be used for cable protection when routed from the side.