Monnit wireless water temperature sensor use a 3 foot external water sealed sensor probe to measure…
Brand:
Monnit
Code:
ART-109612
MPN
MNS2-8-W1-TS-WT-L03
EAN
-
Monnit wireless water temperature sensor use a 3 foot external water sealed sensor probe to measure temperatures in water or non-combustible liquids. Perfect for monitoring temperatures in water storage tanks, pools, aquariums and natural wet-life environments. User customization allows you to set the frequency of readings and the ability to set conditions for text and/or email notifications from the system. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.
Alert Send new parameters or actions to be carried out to Modbus slaves. MONITOR Receive feedback on…
Brand:
ADEUNIS
Code:
ART-125414
MPN
ARF8240AA
EAN
-
Alert Send new parameters or actions to be carried out to Modbus slaves. MONITOR Receive feedback on faults and alerts from Modbus slaves. Act - Reading a slave’s registers from the network - Write to a slave’s registrers from the network
Questo sensore alimentato a batteria IP67 misura temperatura , umidità e invia i dati raccolti a…
Brand:
Enginko
Code:
ART-124982
MPN
MCF-LW12TERWP
EAN
-
Questo sensore alimentato a batteria IP67 misura temperatura , umidità e invia i dati raccolti a una rete LoRaWAN. Ideale per una vasta gamma di applicazioni come stazioni meteorologiche, monitoraggio urbano, qualità dell'aria, progetti industriali, ambientali o agricoli. Applicazioni : Stazione meteorologica Smart City Agricoltura intelligente
Questo prodotto può essere utilizzato solo in abbinamento ai dispositivi Plug&Sense! Per maggiori…
Brand:
Libelium
Code:
ART-111536
MPN
9374-P
EAN
8434402709018
Questo prodotto può essere utilizzato solo in abbinamento ai dispositivi Plug&Sense! Per maggiori informazioni circa la compatibilità e sviluppi contattare: iot@allnet-italia.it
I modelli Smart Water Xtreme è un'evoluzione della nostra linea di agricoltura con una nuova…
Brand:
Libelium
Code:
ART-127786
MPN
SWXB-LW-EU
EAN
8434402723496
I modelli Smart Water Xtreme è un'evoluzione della nostra linea di agricoltura con una nuova selezione di sensori professionali di fascia alta. Permette di monitorare molteplici parametri ambientali che all'osservazione del tempo. Esistono sensori per il monitoraggio atmosferico e coinvolgono una vasta gamma di applicazioni, dall'analisi delle piante del suolo e per la salute delle piante. È possibile collegare fino a 32 sensori.. Per ulteriori informazione ed eventuali sviluppi contattare: iot@allnet-italia.it
ALTA wireless pressure meters measure pressure from a 5 volt pressure transducer and transmits the…
Brand:
Monnit
Code:
ART-109685
MPN
MNS2-8-W2-PS-050
EAN
-
ALTA wireless pressure meters measure pressure from a 5 volt pressure transducer and transmits the pressure measurement to iMonnit. By connecting the Monnit wireless pressure sensor to a pressurized gas, liquid or vapor supply line, it can measure the pressure within the line and send data to the iMonnit Online Sensor Monitoring and Notification System. The data is stored in the online system and can be reviewed and exported as a data sheet or graph. User customization allows you to set notifications and alerts from the system so you can know immediately if pressure is above or below an optimal range. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.
The Wireless Thermocouple Sensor is available with a hardwired thermocouple or K-type connector to…
Brand:
Monnit
Code:
ART-109680
MPN
MNS2-8-W2-TS-TC-KP
EAN
-
The Wireless Thermocouple Sensor is available with a hardwired thermocouple or K-type connector to support various thermocouple types and ranges. The hardwired thermocouple option measures temperatures up to 400°C (752°F). The K-type connector with Probe includes a needle probe that measures temperatures up to 400°C (752°F). The sensor is programmed to sleep for a user-given time interval (heartbeat) and then wakeup, send power to the thermocouple and wait for it to stabilize, and convert the analog data, mathematically compute the temperature and transmit the data to the gateway. To stay within the abilities of the processor, the temperature is computed off a data table provided by the manufacturer. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.
The Wireless Thermocouple Sensor is available with a hardwired thermocouple or K-type connector to…
Brand:
Monnit
Code:
ART-109677
MPN
MNS2-8-W2-TS-TC-HW
EAN
-
The Wireless Thermocouple Sensor is available with a hardwired thermocouple or K-type connector to support various thermocouple types and ranges. The hardwired thermocouple option measures temperatures up to 400°C (752°F). The K-type connector with Probe includes a needle probe that measures temperatures up to 400°C (752°F). The sensor is programmed to sleep for a user-given time interval (heartbeat) and then wakeup, send power to the thermocouple and wait for it to stabilize, and convert the analog data, mathematically compute the temperature and transmit the data to the gateway. To stay within the abilities of the processor, the temperature is computed off a data table provided by the manufacturer. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.
Questo prodotto può essere utilizzato solo in abbinamento ai dispositivi Tekelek. Per maggiori…
Brand:
TEKELEK
Code:
ART-125408
MPN
DTANTMA25
EAN
-
Questo prodotto può essere utilizzato solo in abbinamento ai dispositivi Tekelek. Per maggiori informazioni circa la compatibilità e sviluppi contattare: iot@allnet-italia.it
ERS Sound è un sensore ambientale LoRaWAN ™ che misura l'ambiente indoor: il sensore è racchiuso…
Brand:
Elsys
Code:
ART-125394
MPN
ERS-SOUND
EAN
-
ERS Sound è un sensore ambientale LoRaWAN ™ che misura l'ambiente indoor: il sensore è racchiuso in una scatola ambientale ed è progettato per essere montato a parete. All'interno dell'ERS sono presenti cinque sensori: sensore di temperatura sensore di umidità sensore di luminosità sensore di livello sonoro (picco e media) sensore di movimento (PIR). ERS sound è alimentato da due batterie al litio AA da 3,6 V (ER14505). La durata della batteria è stimata in 2 anni ma dipende dall'intervallo del campione, dall'intervallo di trasmissione, dalla velocità dei dati e dai fattori ambientali. Tutti i sensori Elsys sono dotati di NFC (Near Field Communication) per una facile configurazione con un telefono Android con l'applicazione "Impostazioni sensore", è possibile modificare la frequenza di campionamento, la velocità dati, le chiavi di crittografia, i trigger, l'attivazione e molto altro. La batteria non è inclusa. LoRa Alliance CERTIFIED Tutti i sensori Elsys sono costruiti da Semtech (LoRaWAN stack). Canali: US902-928, EU863-870, AS923, AU915-928, KR920-923.