The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The…
Brand:
Cambium Networks
Code:
ART-152748
MPN
SFP-10G-SR
EAN
5704174389774
The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector. The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-SR standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. A logic “1,” or no connection on this pin will disable the laser from transmitting. A logic “0” on this pin provides normal operation. The transmitter has an internal automatic power control loop (APC) to ensure constant optical power output across supply voltage and temperature variations. An open collector compatible Transmit Fault (TFault) is provided. TX_Fault is a module output contact that when high, indicates that the module transmitter has detected a fault condition related to laser operation or safety. The TX_Fault output contact is an open drain/collector and shall be pulled up to the Vcc_Host in the host with a resistor in the range 4.7-10 k?. TX_Disable is a module input contact. When TX_Disable is asserted high or left open, the SFP+ module transmitter output shall be turned off. This contact shall be pulled up to VccT with a 4.7 k? to 10 k? resistor The receiver converts 10Gbit/s serial optical data into serial PECL/CML electrical data. An open collector compatible Loss of Signal is provided. Rx_LOS when high indicates an optical signal level below that specified in the relevant standard. The Rx_LOS contact is an open drain/collector output and shall be pulled up to Vcc_Host in the host with a resistor in the range 4.7-10 k?, or with an active termination. Power supply filtering is recommended for both the transmitter and receiver. The Rx_LOS signal is intended as a preliminary indication to the system in which the SFP+ is installed that the received signal strength is below the specified range. Such an indication typically points to non-installed cables, broken cables, or a disabled, failing or a powered off transmitter at the far end of the cable.
Cambium Networks sta rendendo più semplice che mai provare i nuovi prodotti ePMP a quei WISP che…
Brand:
Cambium Networks
Code:
ART-156596
MPN
JUST TRY EPMP
EAN
Just Try ePMP - Cambium Networks
Cambium Networks sta rendendo più semplice che mai provare i nuovi prodotti ePMP a quei WISP che non l'hanno mai fatto prima. Per questo motivo Cambium Networks ha rilasciato la promo Just Try ePMP dedicata ai clienti che si affacciano per la prima volta al mondo Cambium Networks per i prodotti Punto Multi Punto e con sconti fino al 50% : 1x ePMP 3000 + 1x 4X4 MU-MIMO Antenna + 12x Force 300-25 1x ePMP 3000L + 12x Force 300-25 1x ePMP 3000 + 1x 4X4 MU-MIMO Antenna + 4x Force 300 1x ePMP 3000L + 4x Force 300 Si può acquistare un solo Kit per anno. Per avere maggiori informazioni sulle promo ed una quotazione dedicata contattaci all'indirizzo networking@allnet-italia.it Promo valida fino al 31/12/2021
Cambium Networks ha appena rilasciato una nuova promo che consente di acquistare a prezzi molto…
Brand:
Cambium Networks
Code:
ART-156602
MPN
PROMO Bring a Friend
EAN
e510 compri 3 paghi due
Cambium Networks ha appena rilasciato una nuova promo che consente di acquistare a prezzi molto vantaggiosi i suoi accesso point Outdoor appartenenti alla famiglia cnPilot Infatti è ora possibile acquistare 3 e510, AP outdoor omnidirezionali al prezzo di 2. Il terzo è in regalo!
The ATEN Professional Online UPS is an exceptional and innovative electrical apparatus that provides…
Brand:
Aten
Code:
ART-155357
MPN
PE8208G-ATA-G
EAN
4710423777712
The ATEN Professional Online UPS is an exceptional and innovative electrical apparatus that provides emergency power to a load when the input power source, or the mains, fails. The basic technology of an online UPS is the same as in a standby or line-interactive UPS, however, the ATEN Professional Online UPS provides a much greater current of AC-to-DC battery-charger/rectifier where the rectifier and inverter are designed to run continuously with improved cooling systems. 1x Online UPS 1x Rack Mounting Kit 1x Rail Slide Kit 1x RS-232 Cable 1x USB Type A to B Cable 4x Power Cables 1x Tower Stand set 1x User Instructions
Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively…
Brand:
Ubiquiti
Code:
ART-153581
MPN
POE-50-60W(EU)
EAN
0810354023118
Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCableTM, and TOUGHCable Connectors.
airFiber 60 GHz Radio System Featuring Wave Technology with True Duplex Gigabit Performance for PtP…
Brand:
Ubiquiti
Code:
ART-155063
MPN
AF60-LR-EU
EAN
0810010073563
airFiber 60 GHz Radio System Featuring Wave Technology with True Duplex Gigabit Performance for PtP Links over 12 km Distances AF60 LR is a 60GHz radio designed for high-throughput connectivity over an extended range. The airFiber 60 LR features the integrated high-gain dish antenna for high speed, long-range performance Point-to-Point (PtP) links. New WaveTechnology enables incredible long-range performance within the 60GHz spectrum. Includes a built-in Bluetooth management radio for easy setup.
SFP+ 1m direct attach cable This is highly cost-effective way to connect two SFP/SFP+ devices (for…
Brand:
MikroTik
Code:
ART-155015
MPN
XS+DA0001
EAN
-
SFP+ 1m direct attach cable This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks. They provide a low cost, low power and low latency interconnect solution for 10-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications.
S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode…
Brand:
MikroTik
Code:
ART-155178
MPN
XS+31LC10D
EAN
-
S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode fiber connections Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.
Managed Gigabit Switches with SFP Available with 24 or 48 RJ45 Gigabit ports, the UniFi Switch is a…
Brand:
Ubiquiti
Code:
ART-155131
MPN
USW-48-EU
EAN
00810354024788
Managed Gigabit Switches with SFP Available with 24 or 48 RJ45 Gigabit ports, the UniFi Switch is a fully managed Gigabit switch, delivering robust performance and intelligent switching for your growing networks. Powerful Enterprise Switch Models The UniFi Switch offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. For its total, non?blocking throughput, the 24?port model supports up to 26 Gbps, while the 48-port model supports up to 70 Gbps. Multi-Site Management A single instance of the UniFi Controller running in the cloud can manage multiple UniFi sites within a centralized interface. Each site is logically separated and has its own network monitoring, configuration, maps, statistics, and admin accounts. Optical Fiber Backhaul Two SFP ports support uplinks of up to 1 Gbps. For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps. Non-Blocking Throughput For its total, non?blocking throughput, the 24?port model supports up to 26 Gbps, while the 48-port model supports up to 70 Gbps. Switching Capacity The UniFi Switch offers the forwarding capacity to simultaneously(more...)
Disruptive 2X2 MIMO price/performance Basestation antennas. Designed to seamlessly integrated with…
Brand:
Ubiquiti
Code:
ART-48323
MPN
AM-2G15-120
EAN
00810354020865
Disruptive 2X2 MIMO price/performance Basestation antennas. Designed to seamlessly integrated with Ubiquiti airMAX Rocket hardware for powerful basestation applications. Featuring great cross-pol isolation, gain, beamwidth patterns, and adjacent frequency noise attenuation performance.
Super for Sectors With the fastest client speeds, access point capacity are combined with local and…
Brand:
MIMOSA
Code:
ART-155176
MPN
100-00037-01
EAN
-
Super for Sectors With the fastest client speeds, access point capacity are combined with local and network wide spectrum reuse, the Mimosa A5c delivers the highest possible scale for any unlicensed fixed wireless network. Fiber Speed Access at a Fraction of the Cost With client speeds capable of 500 Mbps+, and access point capacity up to 1.5 Gbps delivers the speeds consumers and business users demand at a fraction of the cost of delivering Fiber to the Premises. at each Site With integrated high precision GPS Sync technology, new A5c sectors can easily be added at existing deployed Mimosa A5 and B5 site and reuse the same channel. This saves valuable, scarce unlicensed spectrum resources when new A5c devices need to be installed "back-to-back" on the same tower or pole. Network Scalability Perfected Unique integrated high precision GPS Sync* technology in each Mimosa A5c allows every deployed device to be collaboratively synchronized across the network. This allows easy channel reuse to save valuable spectrum network wide, and together with the Mimosa Cloud is incredibly simple to deploy and optimize network spectrum use and performance across all your deployed devices. Ultra Capacity TDMA