The mAP (micro Access Point) is a tiny size wireless Dual-Chain 2.4GHz Access Point with full…
Brand:
MikroTik
Code:
ART-87868
MPN
RBmAP2nD
EAN
4752224004291
The mAP (micro Access Point) is a tiny size wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources - USB, Passive PoE and power jack. It also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.
mAP lite The mAP lite is our smallest wireless access point. It is barely larger than a matchbox, we…
Brand:
MikroTik
Code:
ART-77780
MPN
RBmAPL-2nD
EAN
4752224004321
mAP lite The mAP lite is our smallest wireless access point. It is barely larger than a matchbox, we even had to use a special Ethernet port to match it’s slim profile. You can carry it anywhere: use as a travel router to extend that hotel internet to all your devices, or as a client device to improve your laptop signal range, the tiny mAP lite will be always with you. It can also serve as a simple configuration tool for your servers, if there is no ethernet on your mobile device. The mAP lite is a dual chain 802.11 b/g/n device and operates in 2GHz.
La RouterBoard RB912 è un router con scheda Wi-Fi ad alta potenza integrata con uno slot aggiuntivo…
Brand:
MikroTik
Code:
ART-68238
MPN
RB912UAG-2HPnD
EAN
4752224000712
La RouterBoard RB912 è un router con scheda Wi-Fi ad alta potenza integrata con uno slot aggiuntivo per miniPCIe (per una scheda 802.11 o scheda 3G). La scheda wireless integrata è in grado di erogare fino a 1000mW. Caratteristiche tecniche: 1 Ethernet Gigabit, 1 miniPCIe, USB, Additional memory, Gigabit, High power, Dual chain CPU Atheros AR9342 600MHz network processor Wireless 2.4GHz 802.11b/g/n, 2x MMCX connectors miniPCIe slot for 802.11 or 3G (using 3G disables the USB port), USB 2.0 port PoE: 8-30V DC on Ether1 (Non 802.3af) MikroTik RouterOS, Level4 license (supports wireless AP mode)
UAP-IW-HD UniFi InWall HD è un punto di accesso universale a doppia banda, progettato per…
Brand:
Ubiquiti
Code:
ART-114407
MPN
UAP-IW-HD
EAN
00817882025485
UAP-IW-HD UniFi InWall HD è un punto di accesso universale a doppia banda, progettato per l'installazione a filo, da utilizzare in ambienti di ufficio dove è difficile installare modelli standard per vari motivi. Il punto di accesso ha l'aspetto di una presa Ethernet convenzionale e si utilizza invece con il montaggio. UniFi InWall HD, nonostante il suo insolito fattore di forma, ha una parte radio molto produttiva. Il modello supporta gli standard 802.11 AC nella revisione wave 2, che consente l'uso delle tecnologie Mu-Mimo e Beamforming. Pertanto, il modello è adatto anche per l'uso in reti WiFi ad alta densità, il che per un modello così compatto è un risultato più che soddisfacente. L'interfaccia di rete del modello comprende 5 porte Ethernet, un numero inaspettatamente elevato per un punto di accesso WiFi. Tuttavia, tenendo conto che il modello dispone anche di funzioni di presa Ethernet, è abbastanza naturale. Su una porta il punto di accesso riceve dati e alimentazione, utilizzando lo schema 802.3at PoE+, mentre altre 4 porte Lan gigabit sono destinate agli abbonati. Da notare che hanno la possibilità di passare l'alimentazione a 48 V Pass-Through. Caretteristiche tecniche: Networking Interface: (5) 10/100/1000 Ethernet Ports Power Method: 802.3af/at PoE Out: 48V Passthrough (Pins +1, 2; -3, 6) Maximum Power Consumption: 11W /with PoE Passthrough 23W MIMO: 2.4 GHz (2x2), 5 GHz (4x4) Guadagno Antenna: 2.4 GHz (1.8 dBi), 5 GHz (6 dBi) Throughput rate: 2.4 GHz (300 Mbps), 5 GHz (1733 Mbps) Wi-Fi Standards: 802.11 a/b/g/n/ac/ac-wave2 Concurrent Clients: 200+ Mounting: 1-Gang Electrical Wall Box (Not Included) Scarica qui il datasheet
UAP-NanoHD-EU L'access point Ubiquiti UAP-NanoHD consiste in una versione ridotta del modello…
Brand:
Ubiquiti
Code:
ART-110261
MPN
UAP-NanoHD-EU
EAN
00817882024204
UAP-NanoHD-EU L'access point Ubiquiti UAP-NanoHD consiste in una versione ridotta del modello UAP-AC-HD, risultando il più piccolo degli access point UniFi in produzione garantendo però prestazioni elevate. Come il suo predecessore, infatti, sfrutta il protocollo di ultima generazione 802.11ac Wave2 che grazie al 4x4 MU-MIMO (Multi User – Multiple Input, Multiple Output) consentendo la comunicazione a più client contemporaneamente ed aumentando in modo significativo lo throughput complessivo. Caratteristiche tecniche: Networking Interface: (1) 10/100/1000 Ethernet Port Power Method: 802.3af PoE Maximum Power Consumption: 10.5W MIMO: 2.4 GHz (2x2), 5 GHz (4x4) Guadagno Antenna: 2.4 GHz (2.8 dBi), 5 GHz (3 dBi) Throughput rate: 2.4 GHz (300 Mbps), 5 GHz (1733 Mbps) Wi-Fi Standards: 802.11 a/b/g/n/ac/ac-wave2 Concurrent Clients: 200+ Scarica qui il datasheet