Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS.…
Brand:
MikroTik
Code:
ART-68202
MPN
RBGrooveA-52HPn
EAN
4752224001412
Our smallest outdoor series model - a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high 500mW output power! GrooveA has also supports AP mode. With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible! It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align. NEW- now comes packaged with a 2GHz/5GHz 6dBi Omni antena! Box contains: Groove unit, mounting loops, PoE injector, power adapter, 6dBi 2.4/5Ghz Omni antenna
The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in.…
Brand:
MikroTik
Code:
ART-116185
MPN
RB911G-2HPnD-12S
EAN
4752224002853
The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB911 device, the mANTBox comes ready to use with everything included. The device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power.
MikroTik Pair of preconfigured LHGG-60ad devices for 60Ghz link (60GHz antenna, 802.11ad wireless,…
Brand:
MikroTik
Code:
ART-112436
MPN
RBLHGG-60adkit
EAN
4752224004031
MikroTik Pair of preconfigured LHGG-60ad devices for 60Ghz link (60GHz antenna, 802.11ad wireless, four core 716MHz CPU, 256MB RAM, 1x Gigabit LAN, RouterOS L3, POE, PSU) for 1Gbps full duplex on distances of up to 2km
PTP Wireless Bridge – ePMP Bridge-in-a-Box is a pre-paired Point-to-Point (PTP) link comprised of…
Brand:
Cambium Networks
Code:
ART-125130
MPN
C050900B073A
EAN
-
PTP Wireless Bridge – ePMP Bridge-in-a-Box is a pre-paired Point-to-Point (PTP) link comprised of two ePMP Force 180 devices designed to extend networks between two locations (up to 10 miles apart).
UAP-IW-HD UniFi InWall HD è un punto di accesso universale a doppia banda, progettato per…
Brand:
Ubiquiti
Code:
ART-114407
MPN
UAP-IW-HD
EAN
00817882025485
UAP-IW-HD UniFi InWall HD è un punto di accesso universale a doppia banda, progettato per l'installazione a filo, da utilizzare in ambienti di ufficio dove è difficile installare modelli standard per vari motivi. Il punto di accesso ha l'aspetto di una presa Ethernet convenzionale e si utilizza invece con il montaggio. UniFi InWall HD, nonostante il suo insolito fattore di forma, ha una parte radio molto produttiva. Il modello supporta gli standard 802.11 AC nella revisione wave 2, che consente l'uso delle tecnologie Mu-Mimo e Beamforming. Pertanto, il modello è adatto anche per l'uso in reti WiFi ad alta densità, il che per un modello così compatto è un risultato più che soddisfacente. L'interfaccia di rete del modello comprende 5 porte Ethernet, un numero inaspettatamente elevato per un punto di accesso WiFi. Tuttavia, tenendo conto che il modello dispone anche di funzioni di presa Ethernet, è abbastanza naturale. Su una porta il punto di accesso riceve dati e alimentazione, utilizzando lo schema 802.3at PoE+, mentre altre 4 porte Lan gigabit sono destinate agli abbonati. Da notare che hanno la possibilità di passare l'alimentazione a 48 V Pass-Through. Caretteristiche tecniche: Networking Interface: (5) 10/100/1000 Ethernet Ports Power Method: 802.3af/at PoE Out: 48V Passthrough (Pins +1, 2; -3, 6) Maximum Power Consumption: 11W /with PoE Passthrough 23W MIMO: 2.4 GHz (2x2), 5 GHz (4x4) Guadagno Antenna: 2.4 GHz (1.8 dBi), 5 GHz (6 dBi) Throughput rate: 2.4 GHz (300 Mbps), 5 GHz (1733 Mbps) Wi-Fi Standards: 802.11 a/b/g/n/ac/ac-wave2 Concurrent Clients: 200+ Mounting: 1-Gang Electrical Wall Box (Not Included) Scarica qui il datasheet
Just Add Fiber Fiber to wireless is the future of connectivity, and the B11 is ready for it. Simply…
Brand:
MIMOSA
Code:
ART-93215
MPN
100-00036
EAN
-
Just Add Fiber Fiber to wireless is the future of connectivity, and the B11 is ready for it. Simply add your preferred SFP module and you’ll be lit up with gigabit fiber speeds. If you’re not quite ready for fiber, the B11 also offers a standard Gigabit Power-over-Ethernet connection. Bandwidth Changes Like Night & Day Nighttime video streaming has driven nearly 90% of to be in the downstream direction, while daytime symmetric traffic is as critical as ever to businesses. Legacy FDD radios are limited to symmetric traffic usage, leaving vast amounts of spectrum constantly underutilized. The B11, however, can dynamically adapt to bandwidth demand using Auto-TDMA technology, maximizing spectrum utilization throughout the day. Precision Engineered for Reliability Licensed spectrum has always been preferred for its increased link reliability. Now, with the precision engineering of the B11, you can enjoy spectrum efficiency, incredible industry-leading stability, and for the first time groundbreaking dynamic bandwidth control. IP67 Out of the Box The B11 is ready to withstand the elements right out of the box. It comes with an Ethernet and SFP cage IP67 sealing gland, designed specifically for sealing pre-terminate(more...)