ALTA wireless pressure meters measure pressure from a 5 volt pressure transducer and transmits the…
Brand:
Monnit
Code:
ART-109685
MPN
MNS2-8-W2-PS-050
EAN
-
ALTA wireless pressure meters measure pressure from a 5 volt pressure transducer and transmits the pressure measurement to iMonnit. By connecting the Monnit wireless pressure sensor to a pressurized gas, liquid or vapor supply line, it can measure the pressure within the line and send data to the iMonnit Online Sensor Monitoring and Notification System. The data is stored in the online system and can be reviewed and exported as a data sheet or graph. User customization allows you to set notifications and alerts from the system so you can know immediately if pressure is above or below an optimal range. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.
The Wireless Thermocouple Sensor is available with a hardwired thermocouple or K-type connector to…
Brand:
Monnit
Code:
ART-109680
MPN
MNS2-8-W2-TS-TC-KP
EAN
-
The Wireless Thermocouple Sensor is available with a hardwired thermocouple or K-type connector to support various thermocouple types and ranges. The hardwired thermocouple option measures temperatures up to 400°C (752°F). The K-type connector with Probe includes a needle probe that measures temperatures up to 400°C (752°F). The sensor is programmed to sleep for a user-given time interval (heartbeat) and then wakeup, send power to the thermocouple and wait for it to stabilize, and convert the analog data, mathematically compute the temperature and transmit the data to the gateway. To stay within the abilities of the processor, the temperature is computed off a data table provided by the manufacturer. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.
Monnit wireless water temperature sensor use a 3 foot external water sealed sensor probe to measure…
Brand:
Monnit
Code:
ART-109612
MPN
MNS2-8-W1-TS-WT-L03
EAN
-
Monnit wireless water temperature sensor use a 3 foot external water sealed sensor probe to measure temperatures in water or non-combustible liquids. Perfect for monitoring temperatures in water storage tanks, pools, aquariums and natural wet-life environments. User customization allows you to set the frequency of readings and the ability to set conditions for text and/or email notifications from the system. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available.
Helios IP Force è un apparato videocitofonico HD IP basato su standard SIP, ideale per ambienti in…
Brand:
2N
Code:
ART-71837
MPN
9151101CHRPW
EAN
8595159506630
Helios IP Force è un apparato videocitofonico HD IP basato su standard SIP, ideale per ambienti in cui si ha bisogno di un prodotto resistente e certificato IP69. E' un prodotto perfetto per ambienti in cui la resistenza del prodotto è fondamentale: l'Helios IP Force è antivandalo e resistente agli agenti atmosferici. E' possible utilizzare l'Helios IP Force con un centralino telefonico IP basato su standard SIP, così da integrare il proprio IP-PBX al sistema citofonico ed apriporta. In questa configurazione l'Helios IP Force dispone di 1 tasto e di un altoparlante potenziato da 10 Watt, più i led di segnalazione: Chiamata, Conversazione e Porta aperta. Risulta idoneo all'utilizzo anche in ambienti rumorosi e inoltre grazie alla videocamera HD integrata con visione IR notturna è possibile utilizzarlo per visualizzare l'esterno al momento della chiamata. Caratteristiche: Compatibile protocollo SIP Certificato e resistente all'acqua (IP69) Videocamera integrata per videochiamate SIP qualità HD Visione IR notturna Led di segnalazione Altoparlante da 10 watt per utilizzo in ambienti rumorosi 1 tasto per chiamata diretta + tastiera numerica Chiamate dirette su SIP o tramite Proxy Alimentazione tramite PoE Configurazione tramite Web Interface Funzionalità apriporta
2N® Helios IP Safety is a modern emergency intercom that will ensure two-way communication between…
Brand:
2N
Code:
ART-35489
MPN
9152101W
EAN
8595159500737
2N® Helios IP Safety is a modern emergency intercom that will ensure two-way communication between two remote locations when needed. Its reliability is enhanced by robust construction and other practical properties that take into account its use in high-stress operations. Its striking orange colour and illuminated buttons ensure that it is visible and functions even in crisis situations.
AXIS Camera Station is an IP-Surveillance software that works with Axis network cameras and video…
Brand:
Axis
Code:
ART-02637
MPN
0202-012
EAN
7331021012479
AXIS Camera Station is an IP-Surveillance software that works with Axis network cameras and video servers to provide video monitoring, recording and event management functions. With the AXIS Camera Station installed on your Windows PC, you can monitor your cameras, and at the same time, record high quality, digital video either continuously or on schedule, alarm and/or motion detection. With an additional license, the optional AXIS Image Enhancer component of the software can be applied to improve the clarity of images taken in poor conditions such as fog, smoke, rain or snow. See details about AXIS Image Enhancer. The AXIS Camera Station offers easy ways to search for recorded events. In addition, the software has a multi-view playback feature that enables a user to view simultaneous recordings from different cameras to get a comprehensive picture of an event. Remote viewing and playback are also possible with the use of a Web browser or with the AXIS Camera Station's Windows client. The Windows client also enables remote administration of the software. The software allows for scalability, with easy addition of licenses for up to 25 cameras (either networked or analog cameras with video servers attached--see list of compatible products below). Features: * View and record live video from multiple cameras simultaneously * Includes several recording modes: continuous, scheduled, on alarm and/or on motion detection. (The software's motion detection feature works by retrieving an image every specified second and comparing the differences in a specified area of the image.) * Supports, additionally, the video motion detection feature built into some Axis cameras, which saves network bandwidth as images are only sent when motion is detected * High quality recordings * Embedded AXIS Image Enhancer component can be unlocked with an additional license key and activated to improve image clarity in poor visibility conditions such as fog, smoke, rain and snow * No recording limitation in software * Multiple search functions for recorded events * Remote access via a Web browser or Windows client, which is included with the software * Enables control of PTZ and dome cameras * Alarm alert functions (beep and e-mail) * Full duplex, real-time audio support without recording * Multilingual support for English, French, Italian, German and Spanish