Allnet-Italy | Products | Surveillance, Access Management, IoT

Categorie

Surveillance, Access Management, IoT

Courses and Vendor Services

RFID tracking systems

Sensors

Intercoms and Access control

Video surveillance

Smart Infrastructure & Connectivity

Physical security information management (PSIM)

Audible paging systems

Parking & Traffic

Filters

close

Used

Manufacturer

• 2N
• ADEUNIS
• Akuvox
• Allnet
• Axis
• CyberData
• Dahua
• Denso Wave
• Elsys
• Enginko
• Fanvil
• FLIR
• GENETEC INC.
• Grandstream
• Impinj
• Jacarta
• Laird
• Libelium
• MikroTik
• MILESIGHT IoT
• Milesight TVCC
• Mobotix
• Monnit
• MultiTech
• Nordic ID
• Plantronics
• Poynting
• QNAP
• Radxa
• RAK Wireless
• Red Lion
• Reveal Media
• Selea
• Shelly
• Sierra Wireless
• SKIPLY
• Sofia
• Synergy21
• Tattile
• TEKELEK
• TELTONIKA
• Times-7
• TP-Link
• Ubiquiti
• Ubiquiti Enterprise
• Vigilate

Reset filters

Go to Results

Articoli 3254

Products per page

12 24 36 48

Brand

Stock available End User Best Price

FLIR FB-393 O series, thermal bullet IP camera, VOx 320x240 pixel, FOV…

FLIR

ART-107504

MPN: 427-1064-11-00

Le FLIR FB-O sono telecamere termiche IP di tipo bullet, pensate per la protezione perimetrale e contraddistinte dalla semplice integrazione. Utilizzano un sensore termico VOx da 320x240 pixel di qualita' industriale (sensibilita' La certifica ONVIF consente la compatibilita' ed integrabilita' nei piu' comuni e diffusi NVR e software di videosorveglianza, nonche' nella piattaforma FLIR United VMS, in modo da poter sfruttare l'analisi video di questi sistemi. Caratteristiche principali: Facile integrazione: nei piu' comuni NVR/VMS Supporto analisi video: tramite FLIR Intelligent Encoder IOI-TRK-101 e software di terze parti Immagine termica di qualita': nitezza e contrasto ottimizzati dagli algoritmi FLIR AGC e Digital Detail Enhancement DDE Scelta delle lenti: dal super wide 93 al tele 9 Garanzia FLIR: 10 anni per il sensore termico e 3 anni per la telecamera Video output: Flusso IP e analogico simultaneo per integrazione in sistemi di registrazione IP/NVR e DVR analogici Alimentazione: tramite Power over Ethernet NB: Versione con ottica da 93 3.7mm

FLIR FB-393 O series, thermal bullet IP camera, VOx 320x240 pixel, FOV…

Le FLIR FB-O sono telecamere termiche IP di tipo bullet, pensate per la protezione perimetrale e…

Brand: FLIR

Code: ART-107504

MPN

427-1064-11-00

EAN -

Le FLIR FB-O sono telecamere termiche IP di tipo bullet, pensate per la protezione perimetrale e contraddistinte dalla semplice integrazione. Utilizzano un sensore termico VOx da 320x240 pixel di qualita' industriale (sensibilita' La certifica ONVIF consente la compatibilita' ed integrabilita' nei piu' comuni e diffusi NVR e software di videosorveglianza, nonche' nella piattaforma FLIR United VMS, in modo da poter sfruttare l'analisi video di questi sistemi. Caratteristiche principali: Facile integrazione: nei piu' comuni NVR/VMS Supporto analisi video: tramite FLIR Intelligent Encoder IOI-TRK-101 e software di terze parti Immagine termica di qualita': nitezza e contrasto ottimizzati dagli algoritmi FLIR AGC e Digital Detail Enhancement DDE Scelta delle lenti: dal super wide 93 al tele 9 Garanzia FLIR: 10 anni per il sensore termico e 3 anni per la telecamera Video output: Flusso IP e analogico simultaneo per integrazione in sistemi di registrazione IP/NVR e DVR analogici Alimentazione: tramite Power over Ethernet NB: Versione con ottica da 93 3.7mm

Reorder available

tempo di riapprovigionamento - Days

INFO

Dahua

ART-130571

MPN: ASM100-D

Features: · Default IC (Mifare) card (“-D” means ID EM card) · No driver installation, plug and play · USB power supply and communication · Beep and indicator

Features: · Default IC (Mifare) card (“-D” means ID EM card) · No driver installation, plug…

Brand: Dahua

Code: ART-130571

MPN

ASM100-D

EAN -

Features: · Default IC (Mifare) card (“-D” means ID EM card) · No driver installation, plug and play · USB power supply and communication · Beep and indicator

Brand: Dahua

Code: ART-130571

MPN

ASM100-D

stock 1

Your Price

INFO

Dahua Europe PFM300 power adapter/inverter Grey

Dahua

ART-114289

MPN: PFM300

- Easy installation and wall mount, structural water-proof - Support -30 ? ~+70 ? wide-range temperature operation, and the full load efficiency of the power supply can be up to 100% at these temperatures - With junction function for camera wiring or can place video balun with HDCVI/AHD/TVI/CVBS cameras - Made of PC environmental protection material, which meets “V0” fire protection - Accurate over current, voltage load protection

Dahua Europe PFM300 power adapter/inverter Grey

- Easy installation and wall mount, structural water-proof - Support -30 ? ~+70 ? wide-range…

Brand: Dahua

Code: ART-114289

MPN

PFM300

EAN -

- Easy installation and wall mount, structural water-proof - Support -30 ? ~+70 ? wide-range temperature operation, and the full load efficiency of the power supply can be up to 100% at these temperatures - With junction function for camera wiring or can place video balun with HDCVI/AHD/TVI/CVBS cameras - Made of PC environmental protection material, which meets “V0” fire protection - Accurate over current, voltage load protection

Brand: Dahua

Code: ART-114289

MPN

PFM300

Reorder available

tempo di riapprovigionamento 25 Days

Your Price

INFO

Allnet Friendly NanoPi S2 rev1609, QuadCore Samsung S5P4418 Cortex-A9,…

Allnet

ART-110375

MPN: Friendly_NanoPi_S2_rev1609

FriendlyELEC NanoPi S2 - QuadCore Samsung S5P4418 Cortex-A9, 400Mhz-1,4Ghz, 8Gb EMMC Il NanoPi S2 (S2) è stato progettato e sviluppato da FriendlyElec per professionisti, utenti aziendali, produttori e hobbisti. È una piccola scheda con WiFi, Bluetooth e eMMC. Utilizza il SoC Samsung Cortex-A9 S5P4418 Quad Core con frequenza dinamica scalabile fino a 1,4 GHz. Ha 1G DDR3 RAM, 802.11 b / g / n WiFi e modulo Bluetooth 4.0. La sua unità di gestione alimentazione integrata utilizza il chip AXP228 che supporta l'arresto del software. Prende alimentazione dalla porta MicroUSB. Dispone di un'interfaccia di ingresso / uscita video, jack audio da 3,5 mm, porta USB e slot per scheda MicroSD, porta seriale di debug e pin header ADC. Immagini Android e Debian sono pronte per il NanoPi S2. Il sistema operativo Android supporta l'uscita HDMI e LCD. Il NanoPi S2 dispone di diverse interfacce, porte come LVDS e GPIO, compatibili con GPIO di Raspberry Pi. La sua dimensione PCB è di 40 x 75 mm. Il NanoPi S2 funziona con la maggior parte dei moduli e delle immagini OS sviluppate per le schede basate su FriendlyElec S5P4418.

Allnet Friendly NanoPi S2 rev1609, QuadCore Samsung S5P4418 Cortex-A9,…

FriendlyELEC NanoPi S2 - QuadCore Samsung S5P4418 Cortex-A9, 400Mhz-1,4Ghz, 8Gb EMMC Il NanoPi S2…

Brand: Allnet

Code: ART-110375

MPN

Friendly_NanoPi_S2_rev1609

EAN -

FriendlyELEC NanoPi S2 - QuadCore Samsung S5P4418 Cortex-A9, 400Mhz-1,4Ghz, 8Gb EMMC Il NanoPi S2 (S2) è stato progettato e sviluppato da FriendlyElec per professionisti, utenti aziendali, produttori e hobbisti. È una piccola scheda con WiFi, Bluetooth e eMMC. Utilizza il SoC Samsung Cortex-A9 S5P4418 Quad Core con frequenza dinamica scalabile fino a 1,4 GHz. Ha 1G DDR3 RAM, 802.11 b / g / n WiFi e modulo Bluetooth 4.0. La sua unità di gestione alimentazione integrata utilizza il chip AXP228 che supporta l'arresto del software. Prende alimentazione dalla porta MicroUSB. Dispone di un'interfaccia di ingresso / uscita video, jack audio da 3,5 mm, porta USB e slot per scheda MicroSD, porta seriale di debug e pin header ADC. Immagini Android e Debian sono pronte per il NanoPi S2. Il sistema operativo Android supporta l'uscita HDMI e LCD. Il NanoPi S2 dispone di diverse interfacce, porte come LVDS e GPIO, compatibili con GPIO di Raspberry Pi. La sua dimensione PCB è di 40 x 75 mm. Il NanoPi S2 funziona con la maggior parte dei moduli e delle immagini OS sviluppate per le schede basate su FriendlyElec S5P4418.

Brand: Allnet

Code: ART-110375

MPN

Friendly_NanoPi_S2_rev1609

stock 2

Your Price

INFO

SELEA TARGHA-512MP, Telecamera IP di lettura targhe FullHD 2MP con OCR…

Selea

ART-130245

MPN: X-T512L16

Telecamera SELEA di lettura targhe, che integra in un unico prodotto tutte le funzionalità di riconoscimento targhe (software OCR), memoria per White/Black list, funzionalità di gestione eventi e relè di azionamento "apri cancello". TARGHA-512MP è un sistema All-in-One per il controllo degli accessi e tutte le applicazioni nelle quali il veicolo viaggia a velocità ridotta. TARGHA-512MP è la versione più economica della sorella TARGHA-504 e TARGHA-704MP rispetto alle quali manca dell'alimentatore e utilizza una lente a fuoco fisso (anzichè varifocale). Performance Risoluzione: Megapixel Focale fissa 8 o 16 mm Distanza di lavoro: 3 - 10 mt Larghezza varco: 5 mt Numero varchi: 1½ corsia Velocità di cattura: 50 KM/h Alimentazione: 12 VDC NB: alimentatore NON incluso. Richiede accessorio ALT-12 (ART-49470).

SELEA TARGHA-512MP, Telecamera IP di lettura targhe FullHD 2MP con OCR…

Telecamera SELEA di lettura targhe, che integra in un unico prodotto tutte le funzionalità di…

Brand: Selea

Code: ART-130245

MPN

X-T512L16

EAN -

Telecamera SELEA di lettura targhe, che integra in un unico prodotto tutte le funzionalità di riconoscimento targhe (software OCR), memoria per White/Black list, funzionalità di gestione eventi e relè di azionamento "apri cancello". TARGHA-512MP è un sistema All-in-One per il controllo degli accessi e tutte le applicazioni nelle quali il veicolo viaggia a velocità ridotta. TARGHA-512MP è la versione più economica della sorella TARGHA-504 e TARGHA-704MP rispetto alle quali manca dell'alimentatore e utilizza una lente a fuoco fisso (anzichè varifocale). Performance Risoluzione: Megapixel Focale fissa 8 o 16 mm Distanza di lavoro: 3 - 10 mt Larghezza varco: 5 mt Numero varchi: 1½ corsia Velocità di cattura: 50 KM/h Alimentazione: 12 VDC NB: alimentatore NON incluso. Richiede accessorio ALT-12 (ART-49470).

Brand: Selea

Code: ART-130245

MPN

X-T512L16

Reorder available

tempo di riapprovigionamento - Days

Your Price

INFO

Monnit MNS2-8-W2-VD-AC industrial environmental sensor/monitor Voltage…

Monnit

ART-109654

MPN: MNS2-8-W2-VD-AC

EAN   113690305970

The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended for use on devices using supply power from 24 - 500 VAC. Not intended for voltages higher than 500 VAC and also not intended for use with DC sources. Perfect for HVAC systems, sprinkler systems, sump pumps and any other type of electrical appliance monitoring. This sensor triggers on the state change from presence to absence of voltage and vice versa. The data is displayed as either "No Voltage" or "Voltage Detected". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-VD-AC industrial environmental sensor/monitor Voltage…

The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended…

Brand: Monnit

Code: ART-109654

MPN

MNS2-8-W2-VD-AC

EAN 113690305970

The AC Voltage Detection Sensor notifies of the presence or absence of electricity. It is intended for use on devices using supply power from 24 - 500 VAC. Not intended for voltages higher than 500 VAC and also not intended for use with DC sources. Perfect for HVAC systems, sprinkler systems, sump pumps and any other type of electrical appliance monitoring. This sensor triggers on the state change from presence to absence of voltage and vice versa. The data is displayed as either "No Voltage" or "Voltage Detected". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109654

MPN

MNS2-8-W2-VD-AC

EAN 113690305970

stock 6

Your Price

INFO

Monnit MNS2-8-W2-VM-500 industrial environmental sensor/monitor…

Monnit

ART-109648

MPN: MNS2-8-W2-VM-500

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-VM-500 industrial environmental sensor/monitor…

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended…

Brand: Monnit

Code: ART-109648

MPN

MNS2-8-W2-VM-500

EAN -

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109648

MPN

MNS2-8-W2-VM-500

stock 2

Your Price

INFO

Monnit MNS2-8-W2-VM-005 industrial environmental sensor/monitor…

Monnit

ART-109639

MPN: MNS2-8-W2-VM-005

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-VM-005 industrial environmental sensor/monitor…

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended…

Brand: Monnit

Code: ART-109639

MPN

MNS2-8-W2-VM-005

EAN -

The ALTA Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage". ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109639

MPN

MNS2-8-W2-VM-005

stock 1

Your Price

INFO

Impinj Antenna HUB (8 antenne per antenna HUB)

Impinj

ART-105993

MPN: IPJ-A6120-000

Impinj Antenna HUB, che consente di portare a 32 il numero di antenne utilizzabili con un unico Speedway Revolution R420: ogni Hub supporta fino a 8 antenne è utilizzabile soltanto associato a Speedway Revolution R420 con realease firmware Octane 4.10 per ogni reader che monti almeno 1 Hub è necessario 1 GPIO Adapter (art-38417)

Impinj Antenna HUB (8 antenne per antenna HUB)

Impinj Antenna HUB, che consente di portare a 32 il numero di antenne utilizzabili con un unico…

Brand: Impinj

Code: ART-105993

MPN

IPJ-A6120-000

EAN -

Impinj Antenna HUB, che consente di portare a 32 il numero di antenne utilizzabili con un unico Speedway Revolution R420: ogni Hub supporta fino a 8 antenne è utilizzabile soltanto associato a Speedway Revolution R420 con realease firmware Octane 4.10 per ogni reader che monti almeno 1 Hub è necessario 1 GPIO Adapter (art-38417)

Brand: Impinj

Code: ART-105993

MPN

IPJ-A6120-000

stock 2

Your Price

INFO

CyberData Systems 011113 White audio intercom system

CyberData

ART-19315

MPN: 011113

This indoor CyberData SIP-enabled VoIP Intercom with Keypad is a Power-over-Ethernet (PoE 802.3af) and Voice-over-IP (VoIP) two-way communications device that easily connects into existing local area networks (LANs) with a single cable connection. The intercom is compatible with most SIP-based IP PBX servers that comply with SIP RFC 3261. Typical Applications - Access control - Door entry phone - Emergency phone - Mass notification Features - PoE 802.3af enabled (Powered-over-Ethernet) - 12-key kepad - Programmable speed dial - SIP compliant - Adaptive full-duplex voice operation - Network web management - Network adjustable speaker volume and microphone sensitivity - Network downloadable firmware - Concurrent SIP and multicast paging - Dry relay contact for auxiliary control - Peer-to-peer capable - Door closure and tamper alert signal - User downloadable alert, rings tones and call out messages.

CyberData Systems 011113 White audio intercom system

This indoor CyberData SIP-enabled VoIP Intercom with Keypad is a Power-over-Ethernet (PoE 802.3af)…

Brand: CyberData

Code: ART-19315

MPN

011113

EAN -

This indoor CyberData SIP-enabled VoIP Intercom with Keypad is a Power-over-Ethernet (PoE 802.3af) and Voice-over-IP (VoIP) two-way communications device that easily connects into existing local area networks (LANs) with a single cable connection. The intercom is compatible with most SIP-based IP PBX servers that comply with SIP RFC 3261. Typical Applications - Access control - Door entry phone - Emergency phone - Mass notification Features - PoE 802.3af enabled (Powered-over-Ethernet) - 12-key kepad - Programmable speed dial - SIP compliant - Adaptive full-duplex voice operation - Network web management - Network adjustable speaker volume and microphone sensitivity - Network downloadable firmware - Concurrent SIP and multicast paging - Dry relay contact for auxiliary control - Peer-to-peer capable - Door closure and tamper alert signal - User downloadable alert, rings tones and call out messages.

Brand: CyberData

Code: ART-19315

MPN

011113

stock 3

Your Price

INFO

Dahua

ART-110474

MPN: ASC1202C-D

· Support 100,000 valid cards & 150,000 records· Support multiple cards · Support card, password, fingerprint and combination · TCP/IP interface to PC · Wiegand or RS-485 interface to readers(2/4 door) · Door time out alarm, intrusion alarm, duress alarm and tamper alarm · Anti-passback, multi-door interlock, multi-card open · Support 128 efficient time and holiday schedules · Watch dog function ensure device free from halting · Surface mounted installation

· Support 100,000 valid cards & 150,000 records· Support multiple cards · Support card, password,…

Brand: Dahua

Code: ART-110474

MPN

ASC1202C-D

EAN -

· Support 100,000 valid cards & 150,000 records· Support multiple cards · Support card, password, fingerprint and combination · TCP/IP interface to PC · Wiegand or RS-485 interface to readers(2/4 door) · Door time out alarm, intrusion alarm, duress alarm and tamper alarm · Anti-passback, multi-door interlock, multi-card open · Support 128 efficient time and holiday schedules · Watch dog function ensure device free from halting · Surface mounted installation

Brand: Dahua

Code: ART-110474

MPN

ASC1202C-D

stock 2

Your Price

INFO

Monnit MNS2-8-W2-CM-020 industrial environmental sensor/monitor…

Monnit

ART-109659

MPN: MNS2-8-W2-CM-020

ALTA wireless AC Current Meters measure the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the "hot" wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the iMonnit system. The iMonnit system is capable of generating watt hour or kilowatt hour readings as well. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Monnit MNS2-8-W2-CM-020 industrial environmental sensor/monitor…

ALTA wireless AC Current Meters measure the RMS current of an alternating current (AC) system using…

Brand: Monnit

Code: ART-109659

MPN

MNS2-8-W2-CM-020

EAN -

ALTA wireless AC Current Meters measure the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the "hot" wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the iMonnit system. The iMonnit system is capable of generating watt hour or kilowatt hour readings as well. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.

Brand: Monnit

Code: ART-109659

MPN

MNS2-8-W2-CM-020

stock 3

Your Price

INFO

Page 242 of 272 242 243 244 245 246 247 248 249 250 251