The ALTA Wireless Water Rope Sensor detects conductive liquids anywhere along the length of the…
Brand:
Monnit
Code:
ART-109625
MPN
MNS2-8-W2-WS-WR
EAN
-
The ALTA Wireless Water Rope Sensor detects conductive liquids anywhere along the length of the detection rope by using two wires covered with conducting polymer. When water or conductive liquid contacts the rope, the sensor will immediately turn on the RF radio and transmit the data to the wireless gateway and iMonnit Online Sensor Monitoring and Notification System, allowing the user to immediately receive an alert by SMS text, email or voice call. The sensor rope dries quickly allowing the sensor to reset for next use. The sensor comes with an initial 10 foot section of water detection rope and can be expanded up to 100 feet by simply clicking additional 10 foot sections of detection rope together. ALTA - Leading Enterprise Grade "Internet of Things" Solutions ALTA sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows ALTA sensors to have better interference immunity from other wireless devices. Superior power management provides ALTA sensors with almost twice the battery life of Monnit’s standard wireless sensors. - Coin cell sensors typically last 3+ years. - AA and Industrial sensors typically last up to 10+ years. ALTA products employ Monnit's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again. Integrated on-board data storage allows ALTA sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted. Over-the-air updates allow ALTA products to be updated remotely if new fixes or features become available. The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.
The ALTA International 3G Cellular Gateway is based on a 3G (UMTS/GSM) wireless engine and comes…
Brand:
Monnit
Code:
ART-109594
MPN
MNG2-8-3C3I-SC-B1-ND
EAN
113690300098
The ALTA International 3G Cellular Gateway is based on a 3G (UMTS/GSM) wireless engine and comes integrated with Monnit's wireless access point network (WAN) for use with all Monnit wireless sensors. (User is responsible for setting up data plan with a compatible wireless carrier.) The ALTA International 3G Cellular Gateway also features a backup battery that allows the device to continue operating for up to 24 hours in the event of a power failure, ensuring that your sensors are able to communicate with the monitoring software.
RAK Wireless Antenna Radio LoRa in fibra di vetro Peak Gain 5.8dbi gamma di Trasmissione, loRa…
Brand:
RAK Wireless
Code:
ART-127599
MPN
171326
EAN
-
RAK Wireless Antenna Radio LoRa in fibra di vetro Peak Gain 5.8dbi gamma di Trasmissione, loRa Gateway Antenna con 433/470/868/915 MHz Tipo: Adattatore per Cavo Numero del Modello: Glass Fiber Antenna Prodotti di Stato: Stock Pacchetto: Sì Marca: RAK Networking: LoRa Antenna Gain: peak gain 5.8dBi Interface 1: SMA Interface 2: iPEX Frequency 1: 433MHZ Frequency 2: 470MHZ Frequency 3: 868MHZ Frequency 4: 915MHZ Impedance: 50 Ohm Connector Type: N Male S.W.R.: Material of Radiator: Cu Material of Plastic: Body: Glass Fiber
ALERT Monitor to prevent in case malfunction, Prevention in case of machine stoppages. MONITOR…
Brand:
ADEUNIS
Code:
ART-125418
MPN
ARF8190BA-B01
EAN
-
ALERT Monitor to prevent in case malfunction, Prevention in case of machine stoppages. MONITOR Control the production of energy, Track and analyze a consumption.
- Simple additional equipment to increase security. - Prevents tampering with the lock. - It is…
Brand:
2N
Code:
ART-63373
MPN
9159010
EAN
8595159500935
- Simple additional equipment to increase security. - Prevents tampering with the lock. - It is installed between the intercom, from which it is also powered, and the lock which it controls.
Frame for installation on the surface, 1 module. No other accessories are needed for surface…
Brand:
2N
Code:
ART-52508
MPN
9155021
EAN
8595159503868
Frame for installation on the surface, 1 module. No other accessories are needed for surface installation of the intercom/access control reader. When installing on a glass or uneven surface, we recommend you use a backplate. 107 (W) x 130 (H) x 28 (D) mm
There must be just one (with/without a camera) main unit in every installation. The main unit…
Brand:
2N
Code:
ART-52499
MPN
9155101
EAN
8595159503813
There must be just one (with/without a camera) main unit in every installation. The main unit installation requires two frame/box positions; the other position, however, is left for additional module installation. Available also in black.
External RFID card reader for connection to PC using a USB interface. Suitable for system…
Brand:
2N
Code:
ART-82683
MPN
9137421E
EAN
8595159511870
External RFID card reader for connection to PC using a USB interface. Suitable for system administration and enrollment of 13.56MHz and 125kHz cards using the web interface of the intercom or the 2N® Access Commander. It reads serial numbers from the RFID cards.
Il Citofono 2N Helios IP Base è molto facile da installare e permette di risparmiate tempo e costi…
Brand:
2N
Code:
ART-90367
MPN
9156111CB
EAN
8595159509884
Il Citofono 2N Helios IP Base è molto facile da installare e permette di risparmiate tempo e costi d'installazione. Il 2N Helios IP Base offre una camera HD ad un ottimo rapporto qualità prezzo. E' possibile scegliere scegliere la configurazione da uno o due pulsanti ed entrambe le varianti sono incluse nella fornitura. Il modello base si può espandere con il modulo dotato di lettore di carte RFID da 125 kHz o 13,56 MHz (da prevedere a parte: 9156030 o 9156031), ma attualmente i lettori RFID sono fuori produzione, non più disponibili a listino: Aggiornamento importante: dispositivi 2N interessati dalla direttiva RED (Radio Equipment Directive) | 2N Grazie all'installazione esclusivamente a superficie potete risparmiare tempo e denaro evitando modifiche edilizie. L’elevata resistenza è garantita dal grado di protezione ai sensi della norma IP65 e dal certificato IK7. Caratteristiche tecniche: - Codec G.711, G.722 - Codec H.263+, H.263, H.264 per chiamate VoIP MJPEG per streaming http - Altoparlante 2 W - Temperatura d'esercizio da -40 °C a +55 °C - Risoluzione della telecamera HD 1280 x 960 - Angolo visivo 135° in ampiezza, 109° in altezza