Surveillance, Access Management, IoT

Allnet-Italy | Products | Surveillance, Access Management, IoT

Categorie
Surveillance, Access Management, IoT
Courses and Vendor Services
Industry 4.0
RFID tracking systems
Sensors
Intercoms and Access control
Video surveillance
Smart Infrastructure & Connectivity
Physical security information management (PSIM)
Audible paging systems
Parking & Traffic
Filters
close
Reset filters
Articoli 3150
Products per page
Axis T91G61 Mount
Axis
ART-83923
MPN: 5506-951
EAN   7331021049932
Quick connection and room for more Roomy compartment for protection and connectivity AXIS T91G61 Wall Mount is specially designed to accommodate and safely protect against water ingress inside the mount, such as midspans and media converters. The pre-mounted Ethernet cable with IP66 RJ45 connector (with gasket) helps quickly and easily connecting power and data to most of Axis PTZ network cameras. Beautiful and yet strong Thanks to its impact-resistant and outdoor proven material, AXIS T91G61 Wall Mount suits all environments, both indoors and outdoors. AXIS T91G61 has the same hole pattern as the standard Axis PTZ wall mount and for retrofit, a pattern that matches Pelco's PTZ camera mount to enable an easy switch - no additional drilling is required. Moreover, it is possible to run the cables externally by using the conduit holes on the base of the wall mount.
ART-83923

Axis T91G61 Mount

Quick connection and room for more Roomy compartment for protection and connectivity AXIS T91G61…
Brand: Axis
Code: ART-83923
MPN
5506-951
EAN 7331021049932
INFO
Axis 01148-001 PoE adapter
Axis
ART-117142
MPN: 01148-001
EAN   7331021061071
Wide compatibility Compatible with all Axis network video products, AXIS T8129-E Outdoor PoE Extender supports PoE, and it is both IEEE 802.3af, IEEE 802.3at and High PoE 60 W compliant. With its rugged, IP66/IP67-rated enclosure, AXIS T8129-E withstands harsh environmental conditions and challenging temperatures. AXIS T8129-E Outdoor PoE Extender offers a smart and easy-to-install solution for extending the range of your network – with no additional power supply. Without being restricted by the 100m (328ft.) limit for Ethernet cables, Axis network video products can be installed at greater distances. Simply connect AXIS T8129-E in-line with the CAT5e or CAT6 cable and power is forwarded to your Axis network video product. Range depends on the power required so depending on midspan and camera type the connection can in total be between 200-400 meters (656-1312 ft.). For instance, a 25 watt PTZ dome camera may be located 200 m (656 ft.) away using a single AXIS T8129-E. Or, the cable length to a regular 5 watt network camera may extend up to 400 m (1312 ft.), by fitting three AXIS T8129-E at 100 m (328 ft.) intervals. No additional power supply AXIS T8129-E does not require any additional power supply and the connected network camera is fed by a single PoE switch or midspan. It offers two female Ethernet ports, which are both configured automatically for link speed, duplex and crossover and the full-rate network throughput is maintained.
ART-117142

Axis 01148-001 PoE adapter

Wide compatibility Compatible with all Axis network video products, AXIS T8129-E Outdoor PoE…
Brand: Axis
Code: ART-117142
MPN
01148-001
EAN 7331021061071
INFO
Axis 5017-051 security camera accessory Mount
Axis
ART-39355
MPN: 5017-051
EAN   7331021037595
Holding device for pendant mounted cameras. For use with 1,5" pipes with NPS or NPT threading. Compatible with all cameras with standard tripod threading.
ART-39355

Axis 5017-051 security camera accessory Mount

Holding device for pendant mounted cameras. For use with 1,5" pipes with NPS or NPT threading.…
Brand: Axis
Code: ART-39355
MPN
5017-051
EAN 7331021037595
INFO
Axis T8516 PoE+ Managed Gigabit Ethernet (10/100/1000) Black Power…
Axis
ART-87073
MPN: 5801-692
EAN   7331021055872
Easy to install and configure AXIS T8516 PoE+ Network Switch, just as Axis product portfolio, is easy to install by using standard Axis tools as AXIS IP utility and AXIS Camera Management. AXIS T8516 also comes with an individual password and easy to use setup wizard. AXIS T8516 comes with a comprehensive set of configuration tools such as an integrated DHCP server for automatic assignment of IP addresses. It also allows for even more advanced network configuration such as VLAN, QoS, Security, and Spanning tree to further optimize the total solution. Perfect match for Axis surveillance solutions AXIS T8516 PoE+ Network Switch is made for the surveillance industry and a perfect complement to Axis recorders such as AXIS Camera Station S10 Series. This to simplify further setup and installation of the surveillance systems. Total overview with unique web graphic user interface The unique web graphic user interface offers a graphic topology for easy overview of all devices in the system. The graphic user interface provides information, status and notifications about connected devices. It allows for management of all connected devices, reboot of cameras in the system, monitoring of network traffic, cable diagnostics and much more.
ART-87073

Axis T8516 PoE+ Managed Gigabit Ethernet (10/100/1000) Black Power…

Easy to install and configure AXIS T8516 PoE+ Network Switch, just as Axis product portfolio, is…
Brand: Axis
Code: ART-87073
MPN
5801-692
EAN 7331021055872
INFO
Axis T8508 Managed Gigabit Ethernet (10/100/1000) Black Power over…
Axis
ART-113607
MPN: 01191-002
EAN   7331021061811
AXIS T8508 PoE+ Network Switch is an easy-to-install network switch optimized for surveillance solutions, that comes with a unique web graphic user interface with topology for easy overview and management of all devices in the system. Easy to install and configure AXIS T8508 PoE+ Network Switch, just as Axis product portfolio, is easy to install by using standard Axis tools as AXIS IP Utility and AXIS Device Manager. AXIS T8508 also comes with an individual password, an easy to use setup wizard, and a comprehensive set of configuration tools such as an integrated DHCP server for automatic assignment of IP addresses. It also allows for even more advanced network configuration such as VLAN, QoS, Security, and Spanning tree to further optimize the total solution. Discrete, compact, and fan-less AXIS T8508 PoE+ Network Switch is a compact, fan-less 8 port switch designed for installations in noise sensitive environments . The compact design enables discreet installations, but can also be rack mounted with AXIS T85 Rack Mount Kit A. Perfect match for Axis surveillance solutions AXIS T8508 PoE+ Network Switch is made for the surveillance industry and a perfect complement to Axis recorders such as AXIS Camera Station S10 Series. This to simplify further setup and installation of the surveillance systems. Total overview with unique user interface The unique web graphic user interface offers a graphic topology for easy overview of all devices in the system. The graphic user interface provides information, status and notifications about connected devices. It allows for management of all connected devices, reboot of cameras in the system, monitoring of network traffic, cable diagnostics and much more.
ART-113607

Axis T8508 Managed Gigabit Ethernet (10/100/1000) Black Power over…

AXIS T8508 PoE+ Network Switch is an easy-to-install network switch optimized for surveillance…
Brand: Axis
Code: ART-113607
MPN
01191-002
EAN 7331021061811
INFO
Axis T8120 Gigabit Ethernet
Axis
ART-27462
MPN: 5026-202
EAN   7331021003385
- Reduced installation costs - IEEE 802.3af compliance Easier and faster installations Power over Ethernet (PoE) offers an easy, fast and cost-effective solution for supplying power to network video products without the need to install power outlets and electrical cabling. No need for power outlets With the use of Axis PoE products, Axis network cameras and video encoders can receive both data and power over a single Ethernet cable. Network video products can thus be installed in areas where traditional power cabling and outlets are unavailable or difficult to install. Axis PoE midspans and PoE splitters Axis PoE midspans provide power (max. 15.4 W per port) over Ethernet cables to network video products with built-in Power over Ethernet support. For network video products without built-in PoE support, a PoE splitter must be used to separate power and data coming over the network cable. Axis PoE midspans and PoE splitters are IEEE 802.3af compliant, which ensures compatibility with all Axis products that have built-in support for Power over Ethernet.
ART-27462

Axis T8120 Gigabit Ethernet

- Reduced installation costs - IEEE 802.3af compliance Easier and faster installations Power over…
Brand: Axis
Code: ART-27462
MPN
5026-202
EAN 7331021003385
INFO
Axis F8212 Housing
Axis
ART-75445
MPN: 5507-111
EAN   7331021050198
AXIS F8212 Trim Ring, sold in packs of 10, enables AXIS F1005-E/F1035-E Sensor Units and AXIS P1214-E/P1224-E Network Cameras to be recessed mounted and easily secured on a glass, plastic or metal panel. For AXIS F1005-E, the thickness of the panel should not exceed 11.5 mm (7/16 in.). For AXIS F1035-E/P1214-E/P1224-E, the thickness of the panel should not be more than 8.5 mm (5/16 in.). The cover ring’s diameter is 4.5 cm (1 3/4 in.).
ART-75445

Axis F8212 Housing

AXIS F8212 Trim Ring, sold in packs of 10, enables AXIS F1005-E/F1035-E Sensor Units and AXIS…
Brand: Axis
Code: ART-75445
MPN
5507-111
EAN 7331021050198
INFO
Axis T98A18-VE Housing & mount
Axis
ART-40562
MPN: 5900-181
EAN   7331021003705
Vandal-resistant to withstand adversities The polycarbonate, AXIS T98A-VE Surveillance Cabinet Series is IP66-rated for protection against the ingress of dust and high pressure water jets from any direction. The NEMA 4X rating protects against windblown dust, salt spray, rain, hose-directed water, and damage from external ice formation. It provides also IK10-rated material for protection against impact and vandalism. The surveillance cabinets support vibration rating 4M4 and 4M3 (AXIS T98A18-VE). Step-by-step installation The modularity of AXIS T98A-VE Surveillance Cabinet Series enables different categories of installers to do their part time separated in order to optimize the workflow. - Firstly, the installer mounts AXIS T98A-VE Mounting Plate with cable protection - Secondly, the certified electrician mounts the mains power parts and cover them with the power cover - Thirdly, the installer can finalize the installation of the low-voltage units Ease of installation AXIS T98A-VE offers several ease of installation features to simplify the work for the installers. With a selection of optional mounting brackets, AXIS T98A-VE Mounting Plate can be installed on a wall, pole or building corner. The polycarbonate cabinet base is extremely lightweight that can be easily carried in one hand. The cabinet door can be left or right hinged, thanks to removable hinge pins. Furthermore, the hinges have a stop that locks the cabinet door at 105° to avoid that the door hits back the installer. A DIN rail is pre-mounted for those units that can be snapped on it by using a DIN rail clip. A molded DIN rail is also designed on the inner right-side of the cabinet base. The cabinet base can hang on the hooks of the mounted plate while cables are routed and connected. In a secondary step the cabinet base is slid and secured on the mounting plate with screws. Separated compartments to enhance security For better installation and improve cost efficiency, the inner compartment with a DIN rail can be split into two sections: one to fit mains power units and a second for low-voltage units that do not require installation by a certified electrician. An optional electrical safety kit is available, which includes surge protection, a fuse and an alarm-door switch to detect cabinet intrusion or damage.
ART-40562

Axis T98A18-VE Housing & mount

Vandal-resistant to withstand adversities The polycarbonate, AXIS T98A-VE Surveillance Cabinet…
Brand: Axis
Code: ART-40562
MPN
5900-181
EAN 7331021003705
INFO
Axis T8003 PS57 power adapter/inverter Indoor Black
Axis
ART-44965
MPN: 5029-032
EAN   7331021001664
Axis T8003 PS57. Purpose: Camera, Power supply type: Indoor, Input voltage: 44-57 V. Product colour: Black
ART-44965

Axis T8003 PS57 power adapter/inverter Indoor Black

Axis T8003 PS57. Purpose: Camera, Power supply type: Indoor, Input voltage: 44-57 V. Product colour:…
Brand: Axis
Code: ART-44965
MPN
5029-032
EAN 7331021001664
INFO
Axis Sunshield kit Housing & mount
Axis
ART-86972
MPN: 5700-941
EAN   7331021033535
Sunshield for AXIS P134X-E, AXIS Q1755-E and AXIS Q192X-E. Includes mounting screws and Torx key.
ART-86972

Axis Sunshield kit Housing & mount

Sunshield for AXIS P134X-E, AXIS Q1755-E and AXIS Q192X-E. Includes mounting screws and Torx key.
Brand: Axis
Code: ART-86972
MPN
5700-941
EAN 7331021033535
INFO
Axis T93F20 camera housing Polymer White
Axis
ART-71321
MPN: 5900-281
EAN   7331021043831
-40 °C/ °F with IEEE 802.3af AXIS T93F20 Outdoor Housing can power the camera and its heater and has a temperature range from -40 °C to 60 °C (-40 °F to 140 °F) for the housing itself. The temperature range in running operation depends on the camera model. For more information please check the datasheet. The housing is very power efficient and only requires 15 W PoE at a cold start in -40 ºC/ºF. AXIS T93F05 Protective Housing is a pure protective enclosure and does not have any electronics inside. Therefore, the lower temperature specification is 0 ºC. Features to protect what you value AXIS T93F Housing Series has IP66 and NEMA 4X protection rating against the ingress of dust, windblown dust, rain, high pressure water jets from any direction, hose-directed water, and damage from external ice formation. IK10-rated for protection against impact and vandal acts. In addition, the cables are vandal protected and it is prepared to accommodate an optional alarm switch that triggers at vandal attempts. Corridor format As optional accessory, AXIS Corridor Format Bracket A can be purchased if the fixed camera needs to be installed in a Corridor Format, but keeping the housing straight. The Corridor Format installation is particularly suitable for surveillance of narrow alleys or perimeters. Ease of installation AXIS T93F Series is out-of-the-box ready for installation outdoors. AXIS T94Q01A Wall Mount is included. For installations involving protective pipes, AXIS T94R01P Conduit Back Box (optional accessory) should be used. Threaded holes underneath the housing simplify installation of Axis Illuminators.
ART-71321

Axis T93F20 camera housing Polymer White

-40 °C/ °F with IEEE 802.3af AXIS T93F20 Outdoor Housing can power the camera and its heater and…
Brand: Axis
Code: ART-71321
MPN
5900-281
EAN 7331021043831
INFO
Page 221 of 263 221 222 223 224 225 226 227 228 229 230
Viewed
case form title case form subtitle
company *
email *
name *
surname *
comment
privacy * accept conditions
* mandatory fields