Media Converter
Categorie
Network & Wireless
Networking
da assegnare
Media Converter
Fast Ethernet (10/100)
Gigabit Ethernet ( 10/100/1000 )
Power Injector
Tester di Rete
Powerline
Switch
VDSL/DSLAM
xPON
Switch Industriali
Switch Unmanaged
Switch Managed
Transceiver
Wireless Antenne
Wi-Fi
Controller
Site Survey
Routing
Wireless
Filtri
close
reset filtri
Articoli 15
Prodotti per pagina
Allnet ALL0500v2, Mediaconverter,10BaseT/10Base2-BNCTC
Allnet
ART-181214
MPN: ALL0500v2
EAN   4038816005007
Allnet ALL0500v2, Mediaconverter,10BaseT/10Base2-BNCTC
ART-181214
Allnet ALL0500v2, Mediaconverter,10BaseT/10Base2-BNCTC
Allnet ALL0500v2, Mediaconverter,10BaseT/10Base2-BNCTC
Brand: Allnet
Codice: ART-181214
MPN
ALL0500v2
EAN 4038816005007
INFO
Microsens-MS650426-Industrial-converter Fast Ethernet 100Base-FX/TX,…
Microsens
ART-09664
MPN: MS650426
Fast Ethernet media converter 100Base-FX / 100Base-TX Single mode 1300 nm, 40 km 2 x SC, 1 xRJ45 Power supply, Relay Contacts For the extreme demanding use in industrial environments MICROSENS has developed special media converter. The converter has included several features such as Link Through, ALM, potential free alarm contacts, connector for redundant power supply, cross over switch, solid metal chassis and an extended temperature range. The industrial product range includes beside the Ethernet (10Base-FL/10Base-T) and Fast Ethernet (100Base-FX/100Base-TX) converter of this data sheet also media converter for serial interfaces (RS-232, RS-422, RS-485).
ART-09664
Microsens-MS650426-Industrial-converter Fast Ethernet 100Base-FX/TX,…
Fast Ethernet media converter 100Base-FX / 100Base-TX Single mode 1300 nm, 40 km 2 x SC, 1 xRJ45…
Brand: Microsens
Codice: ART-09664
MPN
MS650426
EAN -
INFO
Microsens-MS410644-V2-Fast Ethernet Media Converter…
Microsens
ART-09554
MPN: MS410644-V2
Media Converter 100Base-FX/100Base-TX, 1310 nm Single mode, 15 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.
ART-09554
Microsens-MS410644-V2-Fast Ethernet Media Converter…
Media Converter 100Base-FX/100Base-TX, 1310 nm Single mode, 15 km, include power supply 2 x SC 1 x…
Brand: Microsens
Codice: ART-09554
MPN
MS410644-V2
EAN -
INFO
Microsens-MS400162-Mini Bridge 1x10/100Base-TX, 1x100Base-FX, Single…
Microsens
ART-09545
MPN: MS400162
EAN   MS400162
· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex mode manual configurable · multimode max. 2 km, single mode versions up to 125 km, optional with simplex fiber (WDM) · ST-/SC-connectors, optional LC, VF-45 and MT-RJ Fast Ethernet Bridge 1x10/100TX 1x100FX Single mode 1300nm SC Laser min. 15km 1 x RJ-45 2 x SC The new Mini Bridge of MICROSENS offers an easy and cost effective integration of 10 Mbit/s Ethernet equipment into modern fiber based Fast Ethernet networks. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbit/s speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eleminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home“ (FTTH) projects. With the standard 10/100Base-TX interface, the enduser can use internet services, Video on Demand and VoIP applications.
ART-09545
Microsens-MS400162-Mini Bridge 1x10/100Base-TX, 1x100Base-FX, Single…
· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex…
Brand: Microsens
Codice: ART-09545
MPN
MS400162
EAN MS400162
INFO
Microsens-MS410640-V2-Fast Ethernet Media Converter…
Microsens
ART-09552
MPN: MS410640-V2
Media Converter 100Base-FX/100Base-TX, 1310 nm Multimode, 2 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.
ART-09552
Microsens-MS410640-V2-Fast Ethernet Media Converter…
Media Converter 100Base-FX/100Base-TX, 1310 nm Multimode, 2 km, include power supply 2 x SC 1 x…
Brand: Microsens
Codice: ART-09552
MPN
MS410640-V2
EAN -
INFO
Microsens-MS400191-Gigabit Ethernet Media Converter…
Microsens
ART-09573
MPN: MS400191
Gigabit Ethernet converter 1000Base-T/1000Base-LX, 1310 nm single mode, max. 10 km, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.
ART-09573
Microsens-MS400191-Gigabit Ethernet Media Converter…
Gigabit Ethernet converter 1000Base-T/1000Base-LX, 1310 nm single mode, max. 10 km, ext. power…
Brand: Microsens
Codice: ART-09573
MPN
MS400191
EAN -
INFO
Microsens-MS400092-pw-over-Ethernet FE Bridge 1x10/100TX 1x100FX,…
Microsens
ART-09551
MPN: MS400092
· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop chassis · Segment splitting and speed adaptation · Auto-Negotiation 10/100Base-TX half-/full-duplex-mode manually configurable · Multimode max. 2 km, ST-/SC-connector · Single mode versions up to 125 km · Optional simplex fiber (WDM) · Power Supply integrated Fast Ethernet Bridge10/100Base-TX/100Base-FX, 1310nm Single mode, min. 30 km 2x SC 1x RJ-45 MICROSENS' new Mini Bridge provides a fiber to copper media conversion whilst at the same time - via the 10/100Base-TX port acting as a power supply for active terminal equipment like e.g. WLAN-access points, IP-cameras or IP-phones. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbps speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eliminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home" (FTTH) projects.
ART-09551
Microsens-MS400092-pw-over-Ethernet FE Bridge 1x10/100TX 1x100FX,…
· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop…
Brand: Microsens
Codice: ART-09551
MPN
MS400092
EAN -
INFO
Microsens-MS400190-Gigabit Ethernet Media Converter…
Microsens
ART-09572
MPN: MS400190
Gigabit Ethernet converter 1000Base-T/1000Base-SX, 850 nm Multimode, max. 550 m, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.
ART-09572
Microsens-MS400190-Gigabit Ethernet Media Converter…
Gigabit Ethernet converter 1000Base-T/1000Base-SX, 850 nm Multimode, max. 550 m, ext. power supply 1…
Brand: Microsens
Codice: ART-09572
MPN
MS400190
EAN -
INFO
Microsens-MS400090-pw-over-Ethernet FE Bridge 1x10/100TX 1x100FX,…
Microsens
ART-09550
MPN: MS400090
· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop chassis · Segment splitting and speed adaptation · Auto-Negotiation 10/100Base-TX half-/full-duplex-mode manually configurable · Multimode max. 2 km, ST-/SC-connector · Single mode versions up to 125 km · Optional simplex fiber (WDM) · Power Supply integrated Fast Ethernet Bridge10/100Base-TX/100Base-FX,1310 nm Multimode, 2 km 2 x SC 1 x RJ-45 MICROSENS' new Mini Bridge provides a fiber to copper media conversion whilst at the same time - via the 10/100Base-TX port acting as a power supply for active terminal equipment like e.g. WLAN-access points, IP-cameras or IP-phones. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbps speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eliminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home" (FTTH) projects.
ART-09550
Microsens-MS400090-pw-over-Ethernet FE Bridge 1x10/100TX 1x100FX,…
· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop…
Brand: Microsens
Codice: ART-09550
MPN
MS400090
EAN -
INFO
Microsens-MS657049X-Industrial FastEthernet Mini Bridging Converter …
Microsens
ART-107650
MPN: MS657049X
Il Mini Converter Fast Ethernet MS657049X della Linea Industriale Microsens Entry Line offre una velocità di trasmissione di 100 Mbps in applicazioni Ethernet di tipo industriale. Oltre alla conversione da rame a fibra, il dispositivo adatta anche la velocità a 10Base-T Fast Ethernet. Questo consente la connessione diretta con end device che possono avere velocità differenti, allo switch centrale. Il dispositivo è di tipo plug-and-play, non sono necessarie particolari configurazioni. Caratteristiche tecniche: Design miniaturizzato in enclosure metallico Alimentazione 18..36VAC/12..60VDC Funzionalità Link Fault Pass through (LFP) Supporta switch mode e converter mode Slot SFP per 100Base-X Range di temperatura esteso -40°C to 75°C
ART-107650
Microsens-MS657049X-Industrial FastEthernet Mini Bridging Converter …
Il Mini Converter Fast Ethernet MS657049X della Linea Industriale Microsens Entry Line offre una…
Brand: Microsens
Codice: ART-107650
MPN
MS657049X
EAN -
INFO
Microsens-MS416956M-12 Port Converter 100Base-TX/100Base-FX, 1310nm…
Microsens
ART-09758
MPN: MS416956M
· Compact design, lowest costs per port · Cost optimised, repeaterless copper/fiber conversion · Simple handling/installation · Support of half- and full-duplex connections · Integrated management, stackable · Optional redundant power supply 12 Port Fast Ethernet Media Converter Single mode 1310nm SC, 15 km, 19" 1HU, RJ-45, manageable 12x RJ-45 100Base-TX, 12x SC-duplex 100Base-FX, 3x RJ-45 Management With the new generation of multiport media converter it is possible to realise the media conversion of up to 12 ports in 1 height unit (1 HU). This port density can be reached also with the standard optical connectors such as ST- and SC-duplex. Beside this high port density the actual 12 port converter has several additional features such as SNMP/web-based management, optional redundant power supply and auto-crossing integrated. The MICROSENS converter are designed for the installation into 19” racks. With this compact design it is possible to reach very high port densities in the central distribution racks. The connection to the central switch is done, depending on the version, by Telco or RJ-45 cable. The Telco cables are having an RJ-21 connector with a capacity of 12 twisted-pair connections and offer flexibility and simple installation.
ART-09758
Microsens-MS416956M-12 Port Converter 100Base-TX/100Base-FX, 1310nm…
· Compact design, lowest costs per port · Cost optimised, repeaterless copper/fiber conversion ·…
Brand: Microsens
Codice: ART-09758
MPN
MS416956M
EAN -
INFO
Microsens-MS400160-Mini Bridge 1x10/100Base-TX, 1x100Base-FX,…
Microsens
ART-09544
MPN: MS400160
· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex mode manual configurable · multimode max. 2 km, single mode versions up to 125 km, optional with simplex fiber (WDM) · ST-/SC-connectors, optional LC, VF-45 and MT-RJ Fast Ethernet Bridge 1x10/100TX 1x100FX Multimode 1300nm SC, ext. power supply 1 x RJ-45 2 x SC The new Mini Bridge of MICROSENS offers an easy and cost effective integration of 10 Mbit/s Ethernet equipment into modern fiber based Fast Ethernet networks. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbit/s speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eleminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home" (FTTH) projects. With the standard 10/100Base-TX interface, the enduser can use internet services, Video on Demand and VoIP applications.
ART-09544
Microsens-MS400160-Mini Bridge 1x10/100Base-TX, 1x100Base-FX,…
· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex…
Brand: Microsens
Codice: ART-09544
MPN
MS400160
EAN -
INFO
Pagina 1 di 2 1 2
Visto
Richiedi informazioni Compila il form per richiedere maggiori informazioni
Azienda *
Email *
Nome *
Cognome *
Inserisci il tuo messaggio
Privacy Ho letto e compreso l'informativa sulla Privacy Policy
* campi obbligatori