Wired | Networking | Prodotti | Allnet-Italia

Per poter utilizzare Allnet-Italia in tutta la gamma

Articoli 731

Microsens-MS650851M-Industrial Gigabit Ethernet Switch 1x…

10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x 10/100Base-TX, 2x 1000Base-SX, SC Multimode 850 nm 2x SC duplex 8x RJ-45 2x power supply · Gigabit Ethernet 10 Port Switch, 7x 10/100Base-TX, 1x10/100/1000-T, 2x 1000Base-SX/LX · 2 Fiber ports for building fault tolerant fiber rings · Manageable with Device Manager, SNMP optional · Full VLAN functionality / data prioritization according to IEEE 802.1q · Reconfiguration time · Optional with SFP · Robust casing in industrial design with integrated holder for 35 mm hat The new 10 port Gigabit Switch is equipped with two 1000Base-SX/LX Gigabit Ethernet fiber optic interfaces and therefore allows the implementation of a fault tolerant optical ring. In case of failure the MICROSENS patented technology assures the reconfiguration of the connection within less than 20 ms.

ART-09677

Microsens-MS650851M-Industrial Gigabit Ethernet Switch 1x…

10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x…

Brand: Microsens

Codice: ART-09677

MPN

MS650851M

EAN -

10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x 10/100Base-TX, 2x 1000Base-SX, SC Multimode 850 nm 2x SC duplex 8x RJ-45 2x power supply · Gigabit Ethernet 10 Port Switch, 7x 10/100Base-TX, 1x10/100/1000-T, 2x 1000Base-SX/LX · 2 Fiber ports for building fault tolerant fiber rings · Manageable with Device Manager, SNMP optional · Full VLAN functionality / data prioritization according to IEEE 802.1q · Reconfiguration time · Optional with SFP · Robust casing in industrial design with integrated holder for 35 mm hat The new 10 port Gigabit Switch is equipped with two 1000Base-SX/LX Gigabit Ethernet fiber optic interfaces and therefore allows the implementation of a fault tolerant optical ring. In case of failure the MICROSENS patented technology assures the reconfiguration of the connection within less than 20 ms.

Brand: Microsens

Codice: ART-09677

MPN

Microsens-MS650852M-Industrial Gigabit Ethernet Switch 1x…

10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x 10/100Base-TX, 2x 1000Base-LX, SC Single mode 1310 nm 2x SC duplex 8x RJ-45 2x power supply · Gigabit Ethernet 10 Port Switch, 7x 10/100Base-TX, 1x10/100/1000-T, 2x 1000Base-SX/LX · 2 Fiber ports for building fault tolerant fiber rings · Manageable with Device Manager, SNMP optional · Full VLAN functionality / data prioritization according to IEEE 802.1q · Reconfiguration time · Optional with SFP · Robust casing in industrial design with integrated holder for 35 mm hat The new 10 port Gigabit Switch is equipped with two 1000Base-SX/LX Gigabit Ethernet fiber optic interfaces and therefore allows the implementation of a fault tolerant optical ring. In case of failure the MICROSENS patented technology assures the reconfiguration of the connection within less than 20 ms.

ART-09678

Microsens-MS650852M-Industrial Gigabit Ethernet Switch 1x…

10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x…

Brand: Microsens

Codice: ART-09678

MPN

MS650852M

EAN -

10 port Gigabit Ethernet Industrial Switch with Ring redundancy 1x 10/100/1000Base-T, 7x 10/100Base-TX, 2x 1000Base-LX, SC Single mode 1310 nm 2x SC duplex 8x RJ-45 2x power supply · Gigabit Ethernet 10 Port Switch, 7x 10/100Base-TX, 1x10/100/1000-T, 2x 1000Base-SX/LX · 2 Fiber ports for building fault tolerant fiber rings · Manageable with Device Manager, SNMP optional · Full VLAN functionality / data prioritization according to IEEE 802.1q · Reconfiguration time · Optional with SFP · Robust casing in industrial design with integrated holder for 35 mm hat The new 10 port Gigabit Switch is equipped with two 1000Base-SX/LX Gigabit Ethernet fiber optic interfaces and therefore allows the implementation of a fault tolerant optical ring. In case of failure the MICROSENS patented technology assures the reconfiguration of the connection within less than 20 ms.

Brand: Microsens

Codice: ART-09678

MPN

Microsens-MS650426-Industrial-converter Fast Ethernet 100Base-FX/TX,…

Fast Ethernet media converter 100Base-FX / 100Base-TX Single mode 1300 nm, 40 km 2 x SC, 1 xRJ45 Power supply, Relay Contacts For the extreme demanding use in industrial environments MICROSENS has developed special media converter. The converter has included several features such as Link Through, ALM, potential free alarm contacts, connector for redundant power supply, cross over switch, solid metal chassis and an extended temperature range. The industrial product range includes beside the Ethernet (10Base-FL/10Base-T) and Fast Ethernet (100Base-FX/100Base-TX) converter of this data sheet also media converter for serial interfaces (RS-232, RS-422, RS-485).

ART-09664

Microsens-MS650426-Industrial-converter Fast Ethernet 100Base-FX/TX,…

Fast Ethernet media converter 100Base-FX / 100Base-TX Single mode 1300 nm, 40 km 2 x SC, 1 xRJ45…

Brand: Microsens

Codice: ART-09664

MPN

MS650426

EAN -

Fast Ethernet media converter 100Base-FX / 100Base-TX Single mode 1300 nm, 40 km 2 x SC, 1 xRJ45 Power supply, Relay Contacts For the extreme demanding use in industrial environments MICROSENS has developed special media converter. The converter has included several features such as Link Through, ALM, potential free alarm contacts, connector for redundant power supply, cross over switch, solid metal chassis and an extended temperature range. The industrial product range includes beside the Ethernet (10Base-FL/10Base-T) and Fast Ethernet (100Base-FX/100Base-TX) converter of this data sheet also media converter for serial interfaces (RS-232, RS-422, RS-485).

Brand: Microsens

Codice: ART-09664

MPN

Microsens-MS400191-Gigabit Ethernet Media Converter…

Gigabit Ethernet converter 1000Base-T/1000Base-LX, 1310 nm single mode, max. 10 km, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.

ART-09573

Microsens-MS400191-Gigabit Ethernet Media Converter…

Gigabit Ethernet converter 1000Base-T/1000Base-LX, 1310 nm single mode, max. 10 km, ext. power…

Brand: Microsens

Codice: ART-09573

MPN

MS400191

EAN -

Gigabit Ethernet converter 1000Base-T/1000Base-LX, 1310 nm single mode, max. 10 km, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.

Brand: Microsens

Codice: ART-09573

MPN

Microsens-MS410640-V2-Fast Ethernet Media Converter…

MPN: MS410640-V2

Media Converter 100Base-FX/100Base-TX, 1310 nm Multimode, 2 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.

ART-09552

Microsens-MS410640-V2-Fast Ethernet Media Converter…

Media Converter 100Base-FX/100Base-TX, 1310 nm Multimode, 2 km, include power supply 2 x SC 1 x…

Brand: Microsens

Codice: ART-09552

MPN

MS410640-V2

EAN -

Media Converter 100Base-FX/100Base-TX, 1310 nm Multimode, 2 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.

Brand: Microsens

Codice: ART-09552

MPN

Microsens-MS410644-V2-Fast Ethernet Media Converter…

MPN: MS410644-V2

Media Converter 100Base-FX/100Base-TX, 1310 nm Single mode, 15 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.

ART-09554

Microsens-MS410644-V2-Fast Ethernet Media Converter…

Media Converter 100Base-FX/100Base-TX, 1310 nm Single mode, 15 km, include power supply 2 x SC 1 x…

Brand: Microsens

Codice: ART-09554

MPN

MS410644-V2

EAN -

Media Converter 100Base-FX/100Base-TX, 1310 nm Single mode, 15 km, include power supply 2 x SC 1 x RJ-45 The MICROSENS Fast-Ethernet Media Converter 100Base-FX/100Base-TX, compliant with IEEE 802.3u, permits the repeaterless coupling of Twisted Pair to optical fibre in Fast-Ethernet networks. The repeaterless connection allows the extension of twisted pair cable beyond the conventional limit. The converter is available as single mode or multimode with standard SC-connectors (ST optional). The converter supports full as well as half duplex connections. In the full duplex mode distances of up to 2 km can be covered. The direct connection permits the extension of twisted pair cable beyond the limit of 100 m. The converter is also available in the form of a patch panel insertion card, which can be built into the MICROSENS 19" chassis. The unit houses a maximum of up to 12 converters and one PSU. The patch panel insertion card is particularly useful to enable high flexibility and economical use of optical fibre infrastructure The LED display indicates the function status of the converter and can be used for error diagnostics. The MICROSENS Fast Ethernet Media Converter 100Base-FX/100Base-TX is available as insertion module for the modular 19" Plug-in system.

Brand: Microsens

Codice: ART-09554

MPN

Microsens-MS400190-Gigabit Ethernet Media Converter…

Gigabit Ethernet converter 1000Base-T/1000Base-SX, 850 nm Multimode, max. 550 m, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.

ART-09572

Microsens-MS400190-Gigabit Ethernet Media Converter…

Gigabit Ethernet converter 1000Base-T/1000Base-SX, 850 nm Multimode, max. 550 m, ext. power supply 1…

Brand: Microsens

Codice: ART-09572

MPN

MS400190

EAN -

Gigabit Ethernet converter 1000Base-T/1000Base-SX, 850 nm Multimode, max. 550 m, ext. power supply 1 x SC duplex 1 x RJ-45 1 x Power · Compact table top unit · Media conversion 1000Base-T/1000Base-SX/LX · Autonegotiation half- or full duplex-mode, alternatively manual configuration · Multimode max. 550 m (50/125µm), singlemode version up to 100 km, optionally via simplex fiber (WDM) · SC-connector MICROSENS’ new Gigabit converter offers a cost effective and fast media conversion from copper (1000Base-T) to fiber optic (1000Base-SX/LX). The direct link enables the extension of twisted pair connections beyond the 100 m limit. The autonegotiation protocol support allows for the automatic configuration of half- and full duplex connections. In addition to this the operating mode can be set manually by means of a DIP switch (full- /half duplex). The converter is available as a tabletop unit with external AC adaptor. Two versions for multimode (1000Base-SX) and singlemode (1000Base-LX) are available. Alternatively the Gigabit converter is available as a modular Access System plug-in unit allowing additional features like management, redundant power supply and up to 100 km reach.

Brand: Microsens

Codice: ART-09572

MPN

Microsens-MS400162-Mini Bridge 1x10/100Base-TX, 1x100Base-FX, Single…

· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex mode manual configurable · multimode max. 2 km, single mode versions up to 125 km, optional with simplex fiber (WDM) · ST-/SC-connectors, optional LC, VF-45 and MT-RJ Fast Ethernet Bridge 1x10/100TX 1x100FX Single mode 1300nm SC Laser min. 15km 1 x RJ-45 2 x SC The new Mini Bridge of MICROSENS offers an easy and cost effective integration of 10 Mbit/s Ethernet equipment into modern fiber based Fast Ethernet networks. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbit/s speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eleminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home“ (FTTH) projects. With the standard 10/100Base-TX interface, the enduser can use internet services, Video on Demand and VoIP applications.

ART-09545

Microsens-MS400162-Mini Bridge 1x10/100Base-TX, 1x100Base-FX, Single…

· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex…

Brand: Microsens

Codice: ART-09545

MPN

MS400162

EAN MS400162

· segment splitting and speed adaption · Auto-Negotiation 10/100Base-TX · half- and fullduplex mode manual configurable · multimode max. 2 km, single mode versions up to 125 km, optional with simplex fiber (WDM) · ST-/SC-connectors, optional LC, VF-45 and MT-RJ Fast Ethernet Bridge 1x10/100TX 1x100FX Single mode 1300nm SC Laser min. 15km 1 x RJ-45 2 x SC The new Mini Bridge of MICROSENS offers an easy and cost effective integration of 10 Mbit/s Ethernet equipment into modern fiber based Fast Ethernet networks. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbit/s speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eleminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home“ (FTTH) projects. With the standard 10/100Base-TX interface, the enduser can use internet services, Video on Demand and VoIP applications.

Brand: Microsens

Codice: ART-09545

MPN

EAN MS400162

Microsens-MS400090-pw-over-Ethernet FE Bridge 1x10/100TX 1x100FX,…

· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop chassis · Segment splitting and speed adaptation · Auto-Negotiation 10/100Base-TX half-/full-duplex-mode manually configurable · Multimode max. 2 km, ST-/SC-connector · Single mode versions up to 125 km · Optional simplex fiber (WDM) · Power Supply integrated Fast Ethernet Bridge10/100Base-TX/100Base-FX,1310 nm Multimode, 2 km 2 x SC 1 x RJ-45 MICROSENS' new Mini Bridge provides a fiber to copper media conversion whilst at the same time - via the 10/100Base-TX port acting as a power supply for active terminal equipment like e.g. WLAN-access points, IP-cameras or IP-phones. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbps speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eliminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home" (FTTH) projects.

ART-09550

Microsens-MS400090-pw-over-Ethernet FE Bridge 1x10/100TX 1x100FX,…

· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop…

Brand: Microsens

Codice: ART-09550

MPN

MS400090

EAN -

· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop chassis · Segment splitting and speed adaptation · Auto-Negotiation 10/100Base-TX half-/full-duplex-mode manually configurable · Multimode max. 2 km, ST-/SC-connector · Single mode versions up to 125 km · Optional simplex fiber (WDM) · Power Supply integrated Fast Ethernet Bridge10/100Base-TX/100Base-FX,1310 nm Multimode, 2 km 2 x SC 1 x RJ-45 MICROSENS' new Mini Bridge provides a fiber to copper media conversion whilst at the same time - via the 10/100Base-TX port acting as a power supply for active terminal equipment like e.g. WLAN-access points, IP-cameras or IP-phones. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbps speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eliminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home" (FTTH) projects.

Brand: Microsens

Codice: ART-09550

MPN

Microsens-MS400092-pw-over-Ethernet FE Bridge 1x10/100TX 1x100FX,…

· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop chassis · Segment splitting and speed adaptation · Auto-Negotiation 10/100Base-TX half-/full-duplex-mode manually configurable · Multimode max. 2 km, ST-/SC-connector · Single mode versions up to 125 km · Optional simplex fiber (WDM) · Power Supply integrated Fast Ethernet Bridge10/100Base-TX/100Base-FX, 1310nm Single mode, min. 30 km 2x SC 1x RJ-45 MICROSENS' new Mini Bridge provides a fiber to copper media conversion whilst at the same time - via the 10/100Base-TX port acting as a power supply for active terminal equipment like e.g. WLAN-access points, IP-cameras or IP-phones. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbps speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eliminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home" (FTTH) projects.

ART-09551

Microsens-MS400092-pw-over-Ethernet FE Bridge 1x10/100TX 1x100FX,…

· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop…

Brand: Microsens

Codice: ART-09551

MPN

MS400092

EAN -

· Power-over-Ethernet according IEEE802.3af with max. power class 15.4 Watt · Compact desktop chassis · Segment splitting and speed adaptation · Auto-Negotiation 10/100Base-TX half-/full-duplex-mode manually configurable · Multimode max. 2 km, ST-/SC-connector · Single mode versions up to 125 km · Optional simplex fiber (WDM) · Power Supply integrated Fast Ethernet Bridge10/100Base-TX/100Base-FX, 1310nm Single mode, min. 30 km 2x SC 1x RJ-45 MICROSENS' new Mini Bridge provides a fiber to copper media conversion whilst at the same time - via the 10/100Base-TX port acting as a power supply for active terminal equipment like e.g. WLAN-access points, IP-cameras or IP-phones. In addition to the media conversion a speed adjustment is done. This adjustment includes the 10 and 100 Mbps speeds as well as the half and full duplex modes. Existing length restrictions for Ethernet (5 km) and Fast Ethernet segments (412 m) are eliminated by the bridge (segment splitting). Beside the multimode version there are several single mode versions developed for „Fiber To The Home" (FTTH) projects.

Brand: Microsens

Codice: ART-09551

MPN

- Mimosa by MTI Double Dual Slant Base Station Antenna, 4.9-5.9 GHz,…

MPN: MT-464042/ND/B

Antenna settoriale MTI 4x4 che lavora nella banda dei 5GHz creata appositamente per lavorare con le radio A5c di Mimosa (ART-83491) . Compabilile con la staffa necessaria per il montaggio MT-120018 (ART-87895) e con l'adapting plate facoltativo IK44095000C (ART-87896). Alcuni dati tecnici: Dimensions (L x W x D): 371 x 371 x 40mm (max) Connector: 4 x N-type Female Frequency Range: 4.9-5.9 GHz Gain: 16.0 ± 1.0 dBi - 3.0dB Azimuth Beam width : 65º - 3.0dB Elevation Beam width: 7º Polarization: Double Dual Linear , ± 45º

ART-87890

- Mimosa by MTI Double Dual Slant Base Station Antenna, 4.9-5.9 GHz,…

Antenna settoriale MTI 4x4 che lavora nella banda dei 5GHz creata appositamente per lavorare con le…

Brand: MIMOSA

Codice: ART-87890

MPN

MT-464042/ND/B

EAN -

Antenna settoriale MTI 4x4 che lavora nella banda dei 5GHz creata appositamente per lavorare con le radio A5c di Mimosa (ART-83491) . Compabilile con la staffa necessaria per il montaggio MT-120018 (ART-87895) e con l'adapting plate facoltativo IK44095000C (ART-87896). Alcuni dati tecnici: Dimensions (L x W x D): 371 x 371 x 40mm (max) Connector: 4 x N-type Female Frequency Range: 4.9-5.9 GHz Gain: 16.0 ± 1.0 dBi - 3.0dB Azimuth Beam width : 65º - 3.0dB Elevation Beam width: 7º Polarization: Double Dual Linear , ± 45º

Brand: MIMOSA

Codice: ART-87890

MPN

Mimosa,N5-X20, 8 Pack,Modular Twist,on Antenna, 150mm Horn per C5x, 20…

Questo articolo include otto antenne N5-X20 . Le antenne N5-X20 sono antenne paraboliche installabili sulle radio C5x. Alcuni dati tecnici: Gain: 20dBi Polarization: Dual-slant 45° RF Connector Type: Mimosa N5-X twist-on Front-to-Back Ratio (min): 35 dB Front-to-Side Ratio (min): 37 dB Dimensions: Diameter 270 mm, Depth: 83 mm

ART-116819

Mimosa,N5-X20, 8 Pack,Modular Twist,on Antenna, 150mm Horn per C5x, 20…

Questo articolo include otto antenne N5-X20 . Le antenne N5-X20 sono antenne paraboliche…

Brand: MIMOSA

Codice: ART-116819

MPN

100-00090

EAN -

Questo articolo include otto antenne N5-X20 . Le antenne N5-X20 sono antenne paraboliche installabili sulle radio C5x. Alcuni dati tecnici: Gain: 20dBi Polarization: Dual-slant 45° RF Connector Type: Mimosa N5-X twist-on Front-to-Back Ratio (min): 35 dB Front-to-Side Ratio (min): 37 dB Dimensions: Diameter 270 mm, Depth: 83 mm

Brand: MIMOSA

Codice: ART-116819

MPN

Pagina 42 di 61 42 43 44 45 46 47 48 49 50 51

Visto

Richiedi informazioni Compila il form per richiedere maggiori informazioni